Towards an optimization methodology of a rough forged part taking into account ductile damage

International Journal on Interactive Design and Manufacturing

Volumn 5, Issue 4, 2011, Pages 213-225

  Khoury, Ibrahim ^a   Lafon, Pascal ^a   Giraud Moreau, Laurence ^a   Daniel, Laurent ^a  

^a UNIVERSITÉ DE TECHNOLOGIE DE TROYES   (France)

Author keywords

Ductile damage; Experimental design; Hot forging; Numerical simulation; Tools geometry

Indexed keywords

AUTOMATIC OPTIMIZATION; AUTOMATIC PROCEDURES; DUCTILE DAMAGE; GEOMETRIC PARAMETER; HOT FORGING; IDENTIFIED PARAMETER; MAXIMAL VALUES; OPTIMIZATION METHODOLOGY; SEMI AUTOMATIC OPTIMIZATION;

COMPUTER SIMULATION; DESIGN OF EXPERIMENTS; FORGINGS; OPTIMIZATION;

GEOMETRY;

EID: 82655172371     PISSN: 19552513     EISSN: 19552505     Source Type: Journal    
DOI: 10.1007/s12008-011-0125-9     Document Type: Article

References (32)

1. Abachi, S.: Wear analysis of hot forging dies. Doctoral Thesis, The Middle East Technical University (2004).
2. ABAQUS Explicit 2. 8, Manuel Theory (2006).
3. Bolarinwa, O. O.: Design of a cross section reduction extrusion tool for square bars. Doctoral Thesis, Office of Graduate Studies of Texas A&M University (2005).
4. Boujut, J. F.: Un exemple d'intégration des fonctions métier dans les systèmes de CAO: la conception de pièces forgées tridimensionnelles. Thèse de doctorat: mécanique, Institut National Polytechnique de Grenoble (1993).
5. Borouchaki H., Laug P., Cherouat A., Saanouni K.: Adaptive remeshing in large plastic strain with damage. Int. J. Numer. Methods. Eng. 63(1), 1-36 (2005).
6. Bramley A. N., Mynors D. J.: The use of forging simulation tools. Mater. Design 21(4), 279-286 (2000).
7. Boujut, J. F., Tichkiewitch, S.: COPEST: a coordination tool in the design process of stamped part. In AMPT 95, International Conference on Advances in Materials and Processing Technologies, Dublin, Ireland (1995).
8. Chamouard A.: Estampage et forge: Tome 3, Technologie Générale et Forge. Dunod, Paris (1970).
9. Cordebois, J. P.: Fabrication par usinage, (Industrie et Technologies, Editions DUNOD) (2003).
10. Cherouat, A., Borouchaki, H., Saanouni, Laug P.: An adaptive remeshing procedure in elastoplastic deformation with ductile damage: application in metal forming processes. In Proceedings of 6th International ESAFORM Conference on Material Forming, Salerne, Italie (2003).
11. Choi J. C., Kim C.: An Integrated Design and CAPP System for Cold or Hot Forging Products. Int. J. Adv. Manuf. Technol. 16(10), 720-727 (2000).
12. Do, T. T.: Optimisation de forme en forgeage 3D. Doctoral Thesis, Ecole Nationale Supérieure des Mines (2006).
13. Datta A. K., Gas D., De P. K., Ramachandrarao P., Mukhopadhyaya M.: Finite element modeling of rolling process and optimization of process parameter. Mater. Sci. Eng. 426(1-2), 11-20 (2006).
14. Fourment L., Bǎlan T., Chenot J. L.: Optimal design for non steady-state metal forming processes-II Application of shape optimization in forging. In International In Journal for Numerical Methods in Engineering 39(1), 51-66 (1996).
15. Freshteh-Saniee, F., Daneshzad-Moghaddam, B.: A new CAD system for finisher die design of an axisymmetric forging component with arbitrary profile. J. Mater. Process. Technol. 153-154, 157-163 (2004).
16. Freshteh-Saniee F., Hosseini A. H.: The effects of flash allowance and bar size on forming load and metal flow in closed die forging. J. Mater. Process. Technol. 177(1-3), 261-265 (2006).
17. Hammi, Y.: Simulation numérique de l'endommagement dans les procédés de mise en forme. Doctoral Thesis, University of Technology of Troyes (2000).
18. Khoury I., Giraud-Moreau L., Lafon P., Labergere C.: Towards an optimisation of forging processes using geometric parameters. J. Mater. Process. Technol. 177(1-3), 224-227 (2006).
19. Kim D. J., Kim B. M., Choi J. C.: Determination of the initial billet geometry for a forged product using neural networks. J. Mater. Process. Technol. 72(1), 86-93 (1997).
20. Khoury, I., Lafon, P., Moreau-Giraud, L., Labergère, C.: Study of simulation of forming process toward an optimization procedure of the process. In IDMME'2006, Grenoble, France (2006).
21. Khoury, I., Lafon, P., Moreau-Giraud, L., Labergere, C.: Localisation of damage zones with respect the final part in forging process for different geometric parameters. In the 10th ESAFORM Conference on metal forming, Zaragoza, Spain (2007).
22. Lestriez, P.: Modélisation numérique du couplage thermo-mécanique-endommagement en transformations finies. Doctoral Thesis, University of Technology of Troyes (2003).
23. Lafon, P.: Dimensionnement et optimisation en mécanique: Application à la conception intégrée des systèmes mécaniques, aux procédés et aux structures. Habilitation à diriger des recherches (HDR), University of Technologie of Troyes (2007).
24. Laug, P., Borouchaki, H.: BL2D-V2: mailleur bidimensionnel adaptatif. Rapport technique. Report for INRIA, RT-0275 (2003).
25. Mariage, J. F.: Simulation numérique de l'endommagement ductile en formage de pièces massives. Doctoral Thesis, University of Technology of Troyes (2003).
26. Saanouni, K.: Numerical Modelling in Damage Mechanics. In: NUMEDAM'00 Revue Européene des Eléments Finis 10: 2-4 (2001).
27. Semakula, H.: Manufacturing of heavy rings and large copper canisters by plastic deformation. Doctoral Thesis, Division of Materials Forming, Department of Production Engineering, Royal Institute of Technology, Stockholm (2003).
28. Saanouni, K., Cherouat, A., Hammi, Y.: Numerical aspects of finite elastoplasticity with isotropic ductile damage for metal forming. In Revue Européenne des Eléments Finis, 10(2-3-4): 327-351 (2001).
29. Tichkiewitch, S.: Copest, Système expert pour la conception optimisée de pièces estampées. Report for compte rendu des journées: Les systèmes experts et leurs applications, France, Avignon (1984).
30. Thiyagarajan, N.: Multi-Level Design Process for 3-D Preform Shape Optimization in Metal Forming Using the Reduced Basis Technique. Doctoral Thesis, Wright State University (2004).
31. Vieilledent, D.: Optimisation des outils en forgeage à chaud par simulation éléments finis et méthode inverse. Applications à des problèmes industriels. Doctoral Thesis: Ecole nationale supérieure des mines (1999).
32. Vieilledent, D., Fourment, L., Lasne, P.: Toward an Automatic Preform Design Software for Axisymmetrical Forging. In IDMME98, France, Compiègne, pp. 483-490 (1998).