Study of environmentally assisted cracking of duplex stainless steels as a result of the presence of sigma phase

Corrosion

Volumn 67, Issue 12, 2011, Pages

  Mahajanam, S P V ^a   Case, R P ^a   Rincon, H E ^a   McIntyre, D R ^a   Joosten, M W ^a   Gjesdal, S ^b   Monsen, H ^b  

^a ConocoPhillips Production Assurance Technology ^*  (United States)

^b ConocoPhillips Norway ^*  (Norway)

Author keywords

Crevice corrosion; Duplex stainless steels; Environmentally assisted cracking; Pitting; Sigma phase

Indexed keywords

CREVICE CORROSION; CYCLIC POLARIZATION; DUPLEX STAINLESS STEEL; DUPLEX STAINLESS STEELS; ENVIRONMENTALLY ASSISTED CRACKING; GALVANOSTATICS; OFFSHORE FACILITIES; OFFSHORE OPERATIONS; OPEN-CIRCUIT POTENTIAL; PITTING POTENTIAL; PITTING RESISTANCE; POTENTIODYNAMIC TESTING; SECOND PHASE PARTICLES; SIGMA PHASE; SLOW STRAIN RATE TESTING; TEST CONDITION;

MATERIALS TESTING; OFFSHORE OIL WELLS; PITTING; POLARIZATION; SEAWATER; STRAIN RATE;

STAINLESS STEEL;

EID: 82455205803     PISSN: 00109312     EISSN: None     Source Type: Journal    
DOI: 10.5006/1.3665356     Document Type: Article

References (34)

1. C.S. Wiesner, S.J. Garwood, P.L. Bowden, "The Structural Significance of HAZ Sigma Phase Formation in Welded 25% Cr Super Duplex Pipework, " in Offshore Mechanics and Arctic Engineering (OMAE) Conference (New York, NY: ASME International, 1993), p. 59-68.
2. K. Ravindranath, S.N. Malhotra, Corros. Sci. 37, 1 (1995): p. 121-132.
3. J.-L. Crolet, S. Corbineau, C.P. Perrollet, "'Sigmatization' of Duplex Forgings: A Case History, " CORROSION/97, paper no. 97015 (Houston, TX: NACE International, 1997).
4. R. Francis, G. Byrne, G. Warburton, "The Role of Environmental and Metallurgical Variables on the Resistance of Duplex Stainless Steels to Sulfide SCC, " CORROSION/97, paper no. 97012 (Houston, TX: NACE, 1997).
5. M. Gojic, A. Markotic, L. Kosec, NAFTA 50, 7-8 (1999): p. 241-256.
6. T. Kuroda, K. Ikeuchi, K. Oe, K. Nakade, "Precipitation Behavior of Sigman Phase in Super Duplex Stainless Steel Weldment, " Proc. Materials Solutions Conf. on Joining of Advanced and Specialty Materials (1999), p. 243-250.
7. T.G. Gooeh, "Welding New Stainless Steels for the Oil and Gas Industry, " CORROSION/2000, paper no. 00138 (Houston, TX: NACE, 2000).
8. L. Karlsson, S. Rigdal, F. Lake, "Effects of Intermetallic Phases in Duplex Stainless Steel Weldments, " in Duplex America 2000 Conf. (Zutphen, The Netherlands: KCI Publishing BV, 2002), p. 257-272.
9. A. Turnbull, E. Francis, A.J. Griffiths, E. Bennett, W. Nirarao, "Measurements of Corrosion Resistance of Super-Duplex Stainless Steel Welds by Electrochemical Techniques, " in Eurocorr, (London, U.K.: The Institute of Materials, Minerals, and Mining [IOM], 2000).
10. A. Turnbull, P.E. Francis, M.P. Ryan, L.P. Orkney, A.J. Griffiths, B. Hawkins, Corrosion 58, 12 (2002): p. 1039-1048, doi:10.5006/1.3280793.
11. E. Angelini, B.D. Benedetti, F. Rosalbino, Corros. Sci. 46 (2004): p. 1351-1367.
12. G. Byrne, R. Francis, G. Warburton, M. Maligas, "The Selection of Superduplex Stainless Steel for Oilfield Applications, " CORROSION/2004, paper no. 04123 (Houston, TX: NACE, 2004).
13. T. Cassagne, F. Busschaert, "A Review on Hydrogen Embrittlement of Duplex Stainless Steels, " CORROSION/2005, paper no. 05098 (Houston, TX: NACE, 2005).
14. T. Otárola, S. Hollner, B. Bonnefois, M. Anglada, L. Coudreuse, A. Mateo, Eng. Fail. Anal. 12 (2005): p. 930-941.
15. C.J. Park, V.S. Rao, H.S. Kwon, Corrosion 61, 1 (2005): p. 76-83, doi:10.5006/1.3278163.
16. S.S.M. Tavares, V.F. Terra, J.M. Pardal, M.P. Cindra Fonseca, J. Mater. Sci. 40 (2005): p. 145-154.
17. Z. Cvijovic, G. Radenkovic, Corros. Sci. 48 (2006): p. 3887-3906.
18. M.A. Dominguez-Aguilar, R.C. Newman, Corros. Sci. 48 (2006): p. 2560-2576.
19. M. Sozanska, K. Klyk-Spyra, Mater. Charact. 56 (2006): p. 399-404.
20. H.M. Ezuber, A. El-Houd, F. El-Shawesh, Desalination 207 (2007): p. 268-275.
21. M, Martins, S.M. Rossitti, M. Ritoni, L.C. Casteletti, Mater. Charact. 58 (2007): p. 909-916.
22. M. Pohl, O. Storz, T. Glogowski, Mater. Charact. 58, 1 (2007): p. 65-71.
23. H. Sieurin, R. Sandstrom, Mater. Sci. Eng., A 444 (2007): p. 271-276.
24. D. Yang, A. Bhattacharya, P. Singh, "Stress Corrosion Cracking of Heat Treated 2205 Duplex Stainless Steel in Caustic Solutions, " CORROSION/2009, paper no. 09175 (Houston, TX: NACE, 2009).
25. NACE MR0175/ISO 15156 Standard, "Petroleum and Natural Gas Industries-Materials for Use in H2S-Containing Environments in Oil and Gas Production-Part 3: Cracking-Resistant CRA (Corrosion-Resistant Alloys) and Other Alloys (Houston, TX: NACE, 2001).
26. ASTM A182/A182M-09, "Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service" (West Conshohocken, PA: ASTM International, 2009).
27. ASTM A370-07a, "Standard Test Methods and Definitions for Mechanical Testing of Steel Products" (West Conshohocken, PA: ASTM International, 2007).
28. ASTM G129-00, "Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking" (West Conshohocken, PA: ASTM International, 2006).
29. R.N. Parkins, R.R. Fessler, Int. J. Mater. Eng. Appl. 1, 2 (1978): p. 80-96.
30. R.N. Parkins, "Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications. Slow Strain Rate Testing-25 Years Experience, " ed. R.D. Kane, vol. STP 1210 (West Conshohocken, PA: ASTM International, 1993), p. 7-21.
31. J. Congleton, H.C. Shih, T. Shoji, R.N. Parkins, Corros. Sci. 25, 8-9 (1985): p. 769-788.
32. D.D. Macdonald, P.-C. Lu, M. Urquidi-Macdonald, T.-K. Yeh, Corrosion 52 (1996): p. 768, doi:10.5006/1.3292070.
33. N.J. Laycock, R.C. Newman, Corros. Sci. 39, 10-11 (1997): p. 1771-1790.
34. G.R. Engelhardt, D.D. Macdonald, M. Urquidi-Macdonald, Corros. Sci. 41, 12 (1999): p. 2267-2302.