Selective laser sintering of 13-93 bioactive glass

21st Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2010

Volumn , Issue , 2010, Pages 504-512

  Kolan, Krishna C R ^a   Leu, Ming C ^a   Hilmas, Gregory E ^a   Velez, Mariano ^b  

^a Architectural and Environmental Engineering   (United States)

^b Mo Sci Corporation   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

3D PRINTERS; BINDERS; BIOPOLYMERS; BONE; COMPRESSIVE STRENGTH; LASER HEATING; MANUFACTURE; SCAFFOLDS; SCAFFOLDS (BIOLOGY); SINTERING;

APPARENT POROSITY; BONE REPAIR; BONE TISSUE; CANCELLOUS BONE; INDIRECT METHODS; MAXIMUM COMPRESSIVE STRENGTHS; SELECTIVE LASER SINTERING; SOAKING CONDITIONS;

BIOACTIVE GLASS;

EID: 82055197869     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (30)

1. R. Y. Zhang and P. X. Ma, "Porous poly(L-lactic acid)/apatite composites created by biomimetic process, " Biomed Mater Res., 45 (4), 285-293, (1999).
2. D. W. Hutmacher, T. Schantz, I. Zein, K. W. Ng, S. H. Teoh and K. C. Tan, "Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling, " J. Biomed Mater Res A, 55 [2] 203-216 (2001).
3. K. H. Tan, C. K. Chua, K. F. Leong, C. M. Cheah, W. S. Gui and W. S. Tan et al., "Selective laser sintering of biocompatible polymers for applications in tissue engineering, " Bio-med Mater Eng UK, 15 (1-2), 113-124, (2005).
4. F. E. Wiria, K. F. Leong, C. K. Chua and Y. Liu, "Poly-e- caprolactone/hydroxyapatite for tissue engineering scaffolds fabrication via selective laser sintering, " Acta Biomater, 3 (1), 1-12 (2007).
5. F. E. Wiria, C. K. Chua, K. F. Leong, Z. Y. Quah, M. Chandrasekaran and M. W. Lee, "Improved biocomposite development of poly(vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering, " J Mater Sci Mater Med., 19 (3), 989-996 (2008).
6. L.L. Hench, "The story of bioglass, " J. Mater. Sci. Mater. Med., 17 (11), 967-978, (2006).
7. M. N. Rahaman, R. F. Brown, B. S. Bal, and D. E. Day, "Bioactive Glasses for Nonbearing Applications in Total Joint Replacement, " Semin. Arthroplasty, 17, 102-12 (2006).
8. R. F. Brown, D. E. Day, T. E. Day, S. Jung, M. N. Rahaman and Q. Fu, "Growth and differentiation of osteoblastic cells on 13-93 bioactive glass fibers and scaffolds, " Acta Biomaterialia, 4, 387-396, (2008).
9. Q. Fu, M. N. Rahaman, W. Huang, D. E. Day and B. S. Bal, "Preparation and bioactive characteristics of a porous 13-93 glass, and its fabrication into the articulating surface of a proximal tibia, " J. Biomed. Mater. Res., 82A, 222-9, (2007).
10. T. Matsuda and T. Mizutani, "Liquid Acrylate-endcapped Biodegrable Poly(ecaprolactone- co-trimethylene Carbonate) II Computer-aided sterolithographic microarchitectural surface photoconstructs, " J. Biomed. Mater. Res., 62, 395-403, (2002).
11. F. C. Gomes de Sousa and J. R. Evans, "Sintered Hydroxyapatite Latticework for Bone Substitute, " J. Am. Ceram. Soc., 86 [3], 517-519, (2003).
12. J. Cesarano, III, J. G. Dellinger, M. P. Saavedra, and D. D. Gill, "Customization of Load- Bearing Hydroxyapatite Lattice Scaffolds, " Int. J. Appl. Ceram. Technol., 2 [3] 212-220, (2005).
13. S. Hsu, H. Yen, C. Tseng, C. Cheng, and C. Tsai, "Evaluation of the growth of chondrocytes and osteoblasts seeded into precision scaffolds fabricated by fused deposition manufacturing, " J Biomed Mater Res B Appl Biomater., 80B [2] 519-527 (2006).
14. A. Rainer, S. M. Giannitelli, F. Abbruzzese, E. Traversa, S. Licoccia and M. Trombetta, "Fabrication of bioactive glass-ceramic foams mimicking human bone portions for regenerative medicine, " Acta Biomaterialia, 4 [2], 362-369, (2008).
15. J. M. Williams and S. Das, "Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering, " Biomaterials, 26, 4817 - 4827, (2005).
16. J. C. Lorrison, R. D. Goodridge, K. W. Dalgarno, and D. J. Wood, "Selective Laser Sintering of Bioactive Glass-Ceramics, " Solid Freeform Fabrication Proceedings, Austin, Texas, 1-8 (2002).
17. R. D. Goodridge, K. W. Dalgarno, and D. J. Wood, "Indirect selective laser sintering of an apatite-mullite glass-ceramic for potential use in bone replacement applications, " J. Engineering in Med H, 220, (2006).
18. M. C. Leu, E. B. Adamek, T. Huang, G. E. Hilmas and F. Dogan, "Freeform Fabrication of Zirconium Diboride Parts Using Selective Laser Sintering, " Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 4-6, (2008).
19. S. Pattnaik, "Investigation of zirconium diboride parts using selective laser sintering, " Thesis (MS), Missouri University of Science and Technology, Rolla, (2009).
20. I. Gibson and D. Shi, "Material properties and fabrication parameters in selective laser sintering process, " Rapid Prototyping Journal, 3 (4), 129-136, (1997).
21. J. C. Nelson, "Selective Laser Sintering: A definition of the process and an empirical sintering model, " Dissertation (PhD), University of Texas, Austin, (1993).
22. F. Abe, K. Osakada, M. Shiomi, K. Uematsu and M. Matsumoto, "The manufacturing of hard tools from metallic powders by selective laser melting, " J. Materials Processing Technology, 111 (1-3), 210-213, (2001).
23. C. Hauser, T. H. C. Childs, K. W. Dalgarno and R. B. Eane, "Atmospheric control during direct selective laser sintering of stainless steel 314s powder, " Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, 265-272, (1999).
24. F. Klocke and C. Wagner, "Coalescence behavior of two metallic particles as base mechanism of selective laser sintering, " CIRP Annals 52 (1), 177-184, (2003).
25. M. K. Agarwala, D. L. Bourell, J. Beaman, H. Marcus and J. Barlow, "Direct selective laser sintering of metals, " Rapid Prototyping Journal, 1 (1), 26-36 (1995).
26. T. H. C. Childs, C. Hauser and M. Badrossamay, "Selective laser sintering (melting) of stainless and tool steel powders: experiments and modeling, " Proc. IMechE part B, J. Engineering Manufacture, 219, 339-357, (2005).
27. K. M. Fan, W. L. Cheung and I. Gibson, "Movement of powder bed material during the selective laser sintering of bisphenol A polycarbonate, " Rapid Prototyping Journal, 11 (4), (2005).
28. Y. A. Song, "Experimental study of the basic process mechanism for direct selective laser sintering of low-melting metallic powder, " Ann. CIRP, Manufacturing Technol. 46, 127- 130, (1997).
29. C. M. Murphy, M. G. Haugh and F. J. O'Brien, "The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering, " Biomaterials, 31, [3], 461-466, (2010).
30. V. Karageorgiou and D. Kaplan, "Review: Porosity of 3D biomaterial scaffolds and osteogenesis, " Biomaterials, 26, [27], 5474-5491, (2005).