Over-consolidation effect on shear behavior of rock joints

International Journal of Rock Mechanics and Mining Sciences

Volumn 48, Issue 8, 2011, Pages 1283-1291

  Babanouri, Nima ^a   Karimi Nasab, Saeed ^a   Baghbanan, Alireza ^b   Mohamadi, Hamid Reza ^a,c  

^a SHAHID BAHONAR UNIVERSITY OF KERMAN   (Iran)

^b ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

^c Gol e Gohar Iron Ore Company   (Iran)

Author keywords

Barton's criterion; Direct shear test; JOC; Joint plaster replica; Over consolidation; Physical modeling

Indexed keywords

FRACTURE; PLASTER; ROCKS; SHEAR FLOW;

BARTON CRITERIA; DIRECT SHEAR TEST; JOINT OVER-CLOSURE; JOINT PLASTER REPLICA; NORMAL BEHAVIOR; OVER CONSOLIDATION; OVER-CONSOLIDATION RATIO; PHYSICAL MODELLING; ROCK JOINT; SHEAR BEHAVIOUR;

SURFACE ROUGHNESS;

FRACTURE; GEOMETRY; LOADING TEST; NUMERICAL MODEL; OVERCONSOLIDATION; ROCK MECHANICS; SHEAR STRENGTH; SHEAR TEST;

EID: 81955161956     PISSN: 13651609     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijrmms.2011.09.010     Document Type: Article

References (42)

1. Babanouri N, Karimi Nasab S. Sarcheshmeh pseudowedge failure, a new challenge in expanding western sector of Sarcheshmeh Copper Mine. In: Proceedings of the 5th Asian rock mechanics symposium (ARMS5), 2008. p. 559-66.
2. Ohnishi Y, Dharmaratne PGR. Shear behaviour of physical model of rock joints under constant normal stiffness condition. In: Barton N, Stephannsson O, editors. Proceedings of the international conference on rock joints, 1990. p. 267-73.
3. Indraratna B., Haque A. Shear behaviour of rock joints 2000, Balkema, Rotterdam.
4. Seidel J.P., Haberfield C.M. A theoretical model for rock joint subjected to constant normal stiffness direct shear. Int J Rock Mech Min Sci 2002, 39:539-553.
5. Jiang Y., Xiao J., Tanabashi Y., Mizokami T. Development of an automated servo-controlled direct shear apparatus applying a constant normal stiffness condition. Int J Rock Mech Min Sci 2004, 41:275-286.
6. Goodman R.E. Methods of geological engineering in discontinuous rocks 1976, West Publishing Company, San Francisco.
7. Bandis S.C., Lunsden A.C., Barton N.R. Fundamentals of rock joint deformation. Int J Rock Mech Min Sci Geomech Abstr 1983, 20(6):249-268.
8. Brown S.R., Scholz C.H. Closure of random elastic surfaces in contact. J Geophys Res 1985, 90:5531-5545.
9. Barton N.S., Bandis S., Bakhtar K. Strength, deformation and conductivity coupling of rock joints. Int J Rock Mech Min Sci Geomech Abstr. 22 1985, 121-140.
10. Malama B., Kulatilake P.H.S.W. Models for normal fracture deformation under compressive loading. Int J Rock Mech Min Sci 2003, 40:893-901.
11. Baghbanan A. Scale and stress effects on hydro-mechanical properties of fractured rock masses. PhD thesis. Division of Land Water Resource Engineering, Royal Institute of Technology (KTH), Stockholm, 2008.
12. Matsuki K., Wang E.Q., Giwelli A.A., Sakaguchi K. Estimation of closure of a fracture under normal stress based on aperture data. Int J Rock Mech Min Sci 2008, 45(2):194-209.
13. Giwelli A.A., Sakaguchi K., Matsuki K. Experimental study of the effect of fracture size on closure behavior of a tensile fracture under normal stress. Int J Rock Mech Min Sci 2009, 46(3):462-470.
14. Jing L., Stephansson O. Fundamentals of discrete element methods for rock engineering: theory and applications 2007, Elsevier, London.
15. Souley M., Homand F., Amadei B. An extension to the Saeb and Amadei constitutive model for rock joints to include cyclic loading paths. Int J Rock Mech Min Sci Geomech Abstr 1995, 32:101-109.
16. Barton N., Choubey V. The shear strength of rock joints in theory and practice. Rock Mech 1977, 10:1-54.
17. Tse R., Cruden D.M. Estimating joint roughness coefficients. Int J Rock Mech Min Sci Geomech Abstr 1979, 16:303-307.
18. Kulatilake P.H.S.W., Um J. Requirement for accurate quantification of self-affine roughness using the roughness-Ienght method. Int J Rock Mech Min Sci 1999, 36:5-18.
19. Unal M. Modelling of discontinuity surface roughness and investigation of its effects on shear strength. PhD thesis. Hacettepe University, Ankara, 2000.
20. Gentier S., Riss J., Archambault G., Flamand R., Hopkins D.L. Influence of fracture geometry on shear behavior. Int J Rock Mech Min Sci 2000, 37:161-174.
21. Lopez P., Riss J., Archambault G. An experimental method to link morphological properties of rock fracture surfaces to their mechanical properties. Int J Rock Mech Min Sci 2003, 40:947-954.
22. Jiang Y., Li B., Tanabashi Y. Estimating the relation between surface roughness and mechanical properties of rock joints. Int J Rock Mech Min Sci 2006, 43:837-846.
23. Fardin N. Influence of structural non-stationarity of surface roughness on morphological characterization and mechanical deformation of rock joints. Rock Mech Rock Eng 2007.
24. Park J.W., Song J.J. Numerical simulation of a direct shear test on a rock joint using a bonded-particle model. Int J Rock Mech Min Sci 2009, 46:1315-1328.
25. Barton N. The shear strength of rock and rock joints. Int J Rock Mech Min Sci Geomech Abstr 1976, 13:255-279.
26. Ladanyi B, Archambault G. Direct and indirect determination of shear strength of rock mass. In: Proceedings of the annual meeting of the Society of Mining Engineers (AIME), 1980.
27. Zhao J. Joint surface matching and shear strength Part B: JRC-JMC shear strength criterion. Int J Rock Mech Min Sci 1997, 34:179-185.
28. Crawford A.M., Curran J.H. The influence of shear velocity on frictional resistance of rock discontinuities. Int J Rock Mech Min Sci Geomech Abstr 1981, 18:505-515.
29. Fardin N. The effect of scale on the morphology, mechanics and transmissivity of single rock fractures. PhD thesis. Division of Land and Water Resources Engineering, Royal Institute of Technology (KTH), Stockholm, 2003.
30. Bandis SC. Experimental studies of scale effects on shear strength and deformation of rock joints. PhD thesis, University of Leeds, 1980.
31. Ohnishi Y, Yoshinaka R. Laboratory investigation of scale effect in mechanical behavior of rock joint. In: Proceedings of the 2nd international conference on mechanics of jointed and faulted rock (MJFR2), 1995. p. 465-70.
32. Re F., Scavia C., Zaninetti A. Variation in contact areas of rock joint surfaces as a function of scale. Int J Rock Mech Min Sci 1997, 34:3-4.
33. Barton N. A model study of the behaviour of steep excavated rock slopes. PhD thesis, Imperial College, London, 1971.
34. Barton N. Review of a new shear strength criterion for rock joints. Eng Geol 1973, 7:287-332.
35. Skempton A.W. The consolidation of clays by gravitational compaction. Q J Geol Soc London 1970, 125:373-411.
36. Das B.M. Advanced soil mechanics 2007, Taylor & Francis, London. 3rd ed.
37. Iwai K. Fundamental studies of fluid flow through a single fracture. PhD thesis. University of California, Berkeley, 1976.
38. Lavrov A. The Kaiser effect in rocks: principles and stress estimation techniques. Int J Rock Mech Min Sci 2003, 40:151-171.
39. ISRM (International Society for Rock Mechanics) Suggested methods for rock characterization, testing and monitoring 1981, Pergamon, Oxford, p. 119-21.
40. BPB Formula company, products catalog (Crystacal D), 2000. http://www.bpbformula.com.
41. Itasca Consulting Group Inc. UDEC user's guide, version 4.0. Minneapolis, 2004.
42. Mason R.L., Gunst R.F., Hess J.L. Statistical design and analysis of experiments 2003, Wiley, New York.