Effect of film thickness and filler properties on sulphuric acid permeation in various commercially available epoxy mortar coatings

Water Science and Technology

Volumn 64, Issue 9, 2011, Pages 1864-1869

  Valix, M ^a   Mineyama, H ^a   Chen, C ^a   Cheung, W H ^a   Shi, J ^a   Bustamante, H ^b  

^a UNIVERSITY OF SYDNEY   (Australia)

^b SYDNEY WATER CORPORATION   (Australia)

Author keywords

Diffusivity; Epoxy mortar; Filler; Film thickness; Polymer alignment; Sulphuric acid

Indexed keywords

APPARENT DIFFUSIVITY; COATING THICKNESS; DIFFUSIVITIES; FILLER ASPECT RATIO; FILLER PROPERTIES; MORTAR COATINGS; POLYMER AGGREGATES; THINNER COATINGS;

ALIGNMENT; ASPECT RATIO; DIFFUSION; FILLED POLYMERS; FILLERS; FILM THICKNESS; MORTAR; POLYMERS; PROTECTIVE COATINGS; SULFURIC ACID; THICKNESS MEASUREMENT;

PLASTIC COATINGS;

EPOXY MORTAR; FILLER; INDUSTRIAL CHEMICAL; POLYMER; SULFURIC ACID; UNCLASSIFIED DRUG;

BIOFILM; COATING; DIFFUSION; GRAVIMETRY; PERMEABILITY; POLYMER; SULFURIC ACID;

ARTICLE; CHEMICAL COMPOSITION; CONCENTRATION (PARAMETERS); DIFFUSION; DISPERSION; GRAVIMETRY; MATERIAL COATING; PARTICLE SIZE; PHYSICAL PARAMETERS; SCANNING ELECTRON MICROSCOPY; THICKNESS; TORTUOSITY; X RAY FLUORESCENCE;

DIFFUSION; EPOXY COMPOUNDS; MANUFACTURED MATERIALS; MICROSCOPY, ELECTRON, SCANNING; MODELS, CHEMICAL; PERMEABILITY; POLYMERS; SPECTROMETRY, X-RAY EMISSION; SULFURIC ACIDS;

EID: 81855200092     PISSN: 02731223     EISSN: None     Source Type: Journal    
DOI: 10.2166/wst.2011.743     Document Type: Article

References (23)

1. Alexandre, B., Langevin, D., Mederic, P., Aubry, T., Couderc, H., Nguyen, Q. T., Saiter, A. & Marais, S. 2009 Water barrier properties of polyamide 12/montmorillonite nanocomposite membranes: structure and volume fraction effects. Journal of Membrane Science 328, 186-204.
2. Aviam, O., Bar-Nes, G., Zeiri, Y. & Sivan, A. 2004 Accelerated biodegradation of cement by sulfur-oxidizing bacteria as a bioassay for evaluating immobilization of low-level radioactive waste. Applied and Environmental Microbiology 70, 6031-6036. (Pubitemid 39471850)
3. Baumgartner, M., Remde, A., Bock, E. & Conrad, R. 1990 Release of nitric-oxide from building stones into the atmosphere. Atmospheric Environment Part B-Urban Atmosphere 24, 87-92. (Pubitemid 20093359)
4. Beddoe, R. E. & Dorner, H. W. 2005 Modelling acid attack on concrete: Part I. The essential mechanisms. Cement and Concrete Research 35, 2333-2339. (Pubitemid 41690204)
5. Crank, J. 1956 The Mathematics of Diffusion. Oxford, Clarendon Press.
6. Gu, J.D., Ford,T.E.,Berke,N. S.& Mitchell, R. 1998 Biodeterioration of concrete by the fungus Fusarium. International Biodeterioration & Biodegradation 41 (2), 101-109. (Pubitemid 28420163)
7. Herrera-Alonso, J. M., Marand, E., Little, J. C. & Cox, S. S. 2009 Transport properties in polyurethane/clay nanocompositesas barrier materials: effect of processing conditions. Journal of Membrane Science 337, 208-214.
8. Isoda, S., Shimada, H., Kochi, M. & Kambe, H. 1981 Molecular aggregation of solid aromatic polymers 0.1. Small-angle x-rayscattering from aromatic polyimide film. Journal of Polymer Science Part B-Polymer Physics 19, 1293-1312. (Pubitemid 12443326)
9. Liu, J. & Vipulanandan, C. 2003 Modeling water and sulfuric acid transport through coated cement concrete. Journal of Engineering Mechanics-Asce 129, 426-437. (Pubitemid 36632253)
10. Liu, J. & Vipulanandan, C. 2004 Long-term performance of epoxy coated clay bricks in sulfuric acid. Journal of Materials in Civil Engineering 16, 349-355. (Pubitemid 39081089)
11. Liu, W., Hoa, S. & Pugh, M. 2008 Water uptake of epoxy-clay nanocomposites: model development. Composites Science and Technology 68, 156-163. (Pubitemid 47629772)
12. Lu, C. S. & Mai, Y. W. 2005 Influence of aspect ratio on barrier properties of polymer-clay nanocomposites. Physical Review Letters 95, article number 088303
13. Lu, C. S. & Mai, Y. W. 2007 Permeability modelling of polymerlayered silicate nanocomposites. Composites Science and Technology 67, 2895-2902.
14. Mensitieri, G., Delnobile, M. A., Monetta, T., Nicodemo, L. & Bellucci, F. 1994 The effect of film thickness on oxygen sorption and transport in dry and water-saturated kapton(r) polyimide. Journal of Membrane Science 89, 131-141.
15. Nixon, R. 1997 Future Material Selection Guidelines for Coatings on Concrete for Changing Exposure Conditions in Large Municipal Waste Water Collection/Treatment Systems. Corrosion 97 Paper 379.
16. Pongjanyakul, T. & Puttipipatkhachorn, S. 2008 Alginatemagnesium aluminum silicate composite films: effect of film thickness on physical characteristics and permeability. International Journal of Pharmaceutics 346, 1-9. (Pubitemid 350103855)
17. Ray, S. S. & Okamoto, M. 2003 Polymer/layered silicate nanocomposites: a review from preparation to processing. Progress in Polymer Science 28, 1539-1641.
18. Sand, W. & Bock, E. 1991a Biodeterioration of mineral materials by microorganisms - biogenic sulfuric and nitric-acid corrosion of concrete and natural stone. Geomicrobiology Journal 9, 129-138. (Pubitemid 23372007)
19. Sand, W. & Bock, E. 1991b Biodeterioration of ceramic materials by biogenic acids. International Biodeterioration 27, 175-183. (Pubitemid 21683217)
20. Sroog, C. E. 1991 Polyimides. Progress in Polymer Science 16, 561-694.
21. Sun, L. Y., Boo,W. J., Clearfield, A., Sue, H. J. & Pham, H. Q. 2008 Barrier properties of model epoxy nanocomposites. Journal of Membrane Science 318, 129-136.
22. Yamanaka, T., Aso, I., Togashi, S., Tanigawa, M., Shoji, K., Watanabe, T., Watanabe, N., Maki, K. & Suzuki, H. 2002 Corrosion by bacteria of concrete in sewerage systems and inhibitory effects of formates on their growth.Water Research 36, 2636-2642. (Pubitemid 34575611)
23. Yang, D. K., Koros,W. J., Hopfenberg, H. B. & Stannett, V. T. 1986 The effects of morphology and hygrothermal aging on water sorption and transport in kapton polyimide. Journal of Applied Polymer Science 31, 1619-1629. (Pubitemid 16538641)