Analysis of texture and R value variations in asymmetric rolling of if steel

Journal of Materials Processing Technology

Volumn 212, Issue 2, 2012, Pages 509-515

  Tóth, Laszlo S ^a   Beausir, Benoit ^b   Orlov, Dmitry ^c   Lapovok, Rimma ^c   Haldar, Arunansu ^d  

^a UNIVERSITÉ PAUL VERLAINE METZ   (France)

^b DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

^c MONASH UNIVERSITY   (Australia)

^d TATA STEEL LTD   (India)

Author keywords

Asymmetric rolling; Ideal orientations; IF steel; Polycrystal modelling; R value; Texture

Indexed keywords

A-STABILITY; ASYMMETRIC ROLLING; CONVENTIONAL ROLLING; EXPERIMENTAL EVIDENCE; IDEAL ORIENTATIONS; IF STEEL; PLASTIC ANISOTROPY; R VALUE; SHEAR COMPONENTS; TEXTURE EVOLUTIONS; THEORETICAL RESULT; UPPER LIMITS;

GRAIN REFINEMENT; MECHANICAL PROPERTIES; STEEL METALLURGY; TEXTURES;

SHEAR FLOW;

EID: 81855164589     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2011.10.018     Document Type: Article

References (36)

1. P.J. Apps, C.P. Heason, and P.B. Prangnell Ultrafine-grain structures produced by severe deformation processing Mater. Sci. Forum 447-448 2004 423 428
2. M. Arzaghi, B. Beausir, and L.S. Tóth Contribution of non-octahedral slip to texture evolution of fcc polycrystals in simple shear Acta Mater. 57 2009 2440 2453
3. A. Azushima, R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, and A. Yanagida Severe plastic deformation (SPD) processes for metals CIRP Ann.: Manuf. Technol. 57 2008 716 735
4. J. Baczynski, and J. Jonas Torsion textures produced by dynamic recrystallization in α-iron and two interstitial-free steels Metall. Mater. Trans. A 29 1998 447 462 (Pubitemid 128716769)
5. B. Beausir, S. Biswas, D.I. Kim, L.S. Tóth, and S. Suwas Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling Acta Mater. 57 2009 5061 5077
6. B. Beausir, and L.S. Tóth A new flow function to model texture evolution in symmetric and asymmetric rolling A. Haldar, S. Suwas, D. Bhattacharjee, International Conference on Microstructure and Texture in Steels, MATS2008 2008 Springer Verlag Jamshedpur, India 415 420
7. B. Beausir, L.S. Tóth, and O. Bouaziz Simulation of texture development of plane carbon steel in multipass rolling using analytical flow function Mater. Sci. Forum 495-497 2005 1603 1608 (Pubitemid 47581327)
8. B. Beausir, L.S. Tóth, and K.W. Neale Ideal orientations and persistence characteristics of hexagonal close packed crystals in simple shear Acta Mater. 55 2007 2695 2705 (Pubitemid 46528816)
9. Y. Beygelzimer, D. Orlov, and V. Varyukhin A new severe plastic deformation method: twist extrusion Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, T.C. Lowe, TMS Annual Meeting and Exhibition 2002 TMS (The Minerals Metals & Materials Society) Seattle, Washington, USA 297 304 (Pubitemid 35392013)
10. A. Clément, and P. Coulomb Eulerian simulation of deformation textures Scr. Metall. 13 1979 899 901
11. D. Daniel, and J. Jonas Measurement and prediction of plastic anisotropy in deep-drawing steels Metall. Mater. Trans. A 21 1990 331 343 (Pubitemid 20648697)
12. H. Dyja, P. Korczak, J.W. Pilarczyk, and J. Grzybowski Theoretical and experimental analysis of plates asymmetric rolling J. Mater. Process Technol. 45 1994 167 172
13. P. Gilormini, L.S. Tóth, and J.J. Jonas An analytic method for the prediction of ODFS with application to the shear of FCC polycrystals Proc. R. Soc. Lond. Ser. A: Math. Phys. Sci. 430 1990 489 507
14. V.S. Gorelik, and I.V. Klimenko Classification and analysis of processes of plate/strip rolling with asymmetric deformation zone Russ. Metall. 1997 34 42
15. J.W. Hutchinson Bounds and self-consistent estimates for creep of polycrystalline materials Proc. R. Soc. Lond. A: Math. Phys. Sci. 348 1976 101 127
16. Y.H. Ji, and J.J. Park Development of severe plastic deformation by various asymmetric rolling processes Mater. Sci. Eng. A 499 2009 14 17
17. U.F. Kocks, and H. Mecking Physics and phenomenology of strain hardening: the FCC case Prog. Mater. Sci. 48 2003 171 273
18. R. Lapovok, L.S. Tóth, M. Winkler, and S.L. Semiatin A comparison of continuous SPD processes for improving the mechanical properties of aluminum alloy 6111 J. Mater. Res. 24 2009 459 469
19. M.A. Meyers, A. Mishra, and D.J. Benson Mechanical properties of nanocrystalline materials Prog. Mater. Sci. 51 2006 427 556 (Pubitemid 43204494)
20. A. Molinari, and L.S. Tóth Tuning a self-consistent viscoplastic model by finite element results. I. Modeling Acta Metall. Mater. 42 1994 2453 2458
21. F. Montheillet, P. Gilormini, and J.J. Jonas Relation between axial stresses and texture development during torsion testing: a simplified theory Acta Metall. Mater. 33 1985 705 717 (Pubitemid 15544219)
22. D. Orlov, Y. Beygelzimer, S. Synkov, V. Varyukhin, N. Tsuji, and Z. Horita Plastic flow, structure and mechanical properties in pure Al deformed by twist extrusion Mater. Sci. Eng. A 519 2009 105 111
23. D. Orlov, R. Lapovok, L.S. Tóth, I.B. Timokhina, P.D. Hodgson, D. Bhattacharjee, and A. Haldar Structure and mechanical properties of asymmetrically rolled IF steel sheet Mater. Sci. Forum 654-656 2010 1255 1258
24. V.F. Potapkin, A.B. Satonin, and Y.K. Dobronosov Deformation of metal in asymmetric rolling of thin strips Russ. Metall. 1987 62 66 (Pubitemid 18581102)
25. A.B. Richelsen Elastic-plastic analysis of the stress and strain distributions in asymmetric rolling Int. J. Mech. Sci. 39 1997 1199 1211 (Pubitemid 127394397)
26. V.M. Salganik, and A.M. Pesin Asimmetrichnaya tonkolistovaya prokatka: razvitie teorii, tekhnologii inovye resheniya Asymmetric Thin Sheet Rolling: Development of the Theory and Technology and New Approaches 1997 MISiS Moscow
27. V.M. Segal, V.I. Reznikov, A.E. Drobyshevkiy, and V.I. Kopylov Plastic metal working by simple shear Russ. Metall. 99 1981
28. H. Takechi Metallurgical aspects on interstitial free sheet steel from industrial viewpoints ISIJ Int. 34 1994 1 8
29. L. Tóth, J. Jonas, D. Daniel, and R. Ray Development of ferrite rolling textures in low- and extra low-carbon steels Metall. Mater. Trans. A 21 1990 2985 3000 (Pubitemid 23588727)
30. L.S. Tóth Simulation of persistence characteristics of textures during plastic deformation A. Haldar, S. Suwas, D. Bhattacharjee, International Conference on Microstructure and Texture in Steels, MATS2008 2008 Springer Verlag Jamshedpur, India 225 246
31. L.S. Tóth, M. Arzaghi, J.J. Fundenberger, B. Beausir, O. Bouaziz, and R. Arruffat-Massion Severe plastic deformation of metals by high-pressure tube twisting Scr. Mater. 60 2009 175 177
32. L.S. Tóth, P. Gilormini, and J.J. Jonas Effect of rate sensitivity on the stability of torsion textures Acta Metall. Mater. 36 1988 3077 3091
33. N. Tsuji, Y. Saito, H. Utsunomiya, and S. Tanigawa Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process Scr. Mater. 40 1999 795 800
34. T. Urabe, and J.J. Jonas Modeling texture change during recrystallization of an IF steel ISIJ Int. 34 1994 435 442
35. R.Z. Valiev, and T.G. Langdon Principles of equal-channel angular pressing as a processing tool for grain refinement Prog. Mater. Sci. 51 2006 881 981 (Pubitemid 44192442)
36. A.P. Zhilyaev, and T.G. Langdon Using high-pressure torsion for metal processing: fundamentals and applications Prog. Mater. Sci. 53 2008 893 979