Adsorption of silver from aqueous solution onto fly ash and phosphogypsum using full factorial design

Environmental Progress and Sustainable Energy

Volumn 30, Issue 4, 2011, Pages 609-619

  Çoruh, Semra ^a   Elevli, Sermin ^a   Şenel, Gaye ^a   Ergun, Osman Nuri ^a  

^a ONDOKUZ MAYIS UNIVERSITY   (Turkey)

Author keywords

adsorption; factorial design; fly ash; phosphogypsum; silver removal

Indexed keywords

ADSORBENT DOSAGE; ADSORPTION PROCESS; EXPERIMENTAL FACTORS; FACTORIAL DESIGN; FULL FACTORIAL DESIGN; INITIAL CONCENTRATION; INTERACTION EFFECT; PHOSPHOGYPSUM; REGRESSION MODEL; SILVER CONCENTRATION;

ADSORPTION; DESIGN; FLY ASH; GYPSUM; REGRESSION ANALYSIS; SILVER; SOLUTIONS; STATISTICAL TESTS;

ANALYSIS OF VARIANCE (ANOVA);

PHOSPHOGYPSUM;

EID: 81255177608     PISSN: 19447442     EISSN: 19447450     Source Type: Journal    
DOI: 10.1002/ep.10521     Document Type: Article

References (48)

1. Wang Ngah, W.S., &, Hanafiah, Ö.A.K.M., (2008). Removal of heavy metal ions from wastewater by chemically modified plant wastes as adsorbents: A review. Bioresource Technology, 99, 3935-3948.
2. Aziz, H.A., Adlan, M.N., &, Ariffin, K.S., (2008). Heavy metals (Cd, Pb, Zn, Ni, Cu and Cr(III)) removal from water in Malaysia: Post treatment by high quality limestone. Bioresource Technology, 99, 1578-1583.
3. Prasad, M., Xu, H., &, Saxena, S., (2008). Multi-component sorption of Pb(II), Cu(II) and Zn(II) onto low-cost mineral adsorbent. Journal of Hazardous Materials, 154, 221-229.
4. Abd El-Ghaffar, M.A., Abdel-Wahab, Z.H., &, Elwakel, K.Z., (2009). Extraction and separation studies of silver (I) and copper (II) from their aqueous solution using chemically modified melamine resisns. Hydrometallurgy, 96, 27-34.
5. Begum, S., (2003). Silver removal from aqueous solution by adsorption on concrete particles. Turkish Journal of Chemistry, 27, 609-617. (Pubitemid 38125413)
6. 2+ from aqueous. Journal of Hazardous Materials, 170, 425-429.
7. Bosco, S.M.D., Jimenez, R.S., &, Carvalho, W.A., (2005). Removal of toxic metals from wastewater by Brazilian natural scolecite. Journal of Colloid and Interface Science, 281, 424-431. (Pubitemid 39574832)
8. Tunali, S., Çabuk, A., &, Akar, T., (2006). Removal of lead and copper ions from aqueous solutions by bacterial strain isolated from soil. Chemical Engineering Journal, 115, 203-211. (Pubitemid 41770996)
9. El-Kamash, A.M., Zaki, A.A., &, Abed El Geleel, M., (2005). Modelling batch kinetics and thermodynamics of zinc and cadmium ions removal from waste solutions using sythetic zeolite A. Journal of Hazardous Materials, 127, 211-220. (Pubitemid 41719217)
10. 2+. Microporous Mesoporous Materials, 61, 137-146. (Pubitemid 36911050)
11. Styliano, M.A., Hadjiconstantinou, M.P., Inglezakis, V.J., Moustakas, K.G., &, Loizidou, M.D., (2007). Use of natural clinoptilolite for the removal of lead, copper and zinc in fixed bed column. Journal of Hazardous Materials, 143, 575-581. (Pubitemid 46562502)
12. Shukla, S.S., Yu, L.J., Dorris, K.L., &, Shukla, A., (2005). Removal of nickel from aqueous solutions by sawdust. Journal of Hazardous Materials, B121, 243-246. (Pubitemid 40693545)
13. Oguz, E., (2005). Thermodynamic and kinetic investigations of PO 4 3- adsorption on blast furnace slag. Journal of Colloid and Interface Science, 281, 62-67. (Pubitemid 39572798)
14. Dimitrova, S.V., &, Mehandgiev, D.R., (1998). Lead removal from aqueous solutions by granulated blast-furnace slag. Water Research, 23, 3289-3292. (Pubitemid 28473039)
15. Lopez, E., Soto, B., Arias, M., Nunez, A., Rubinos, D., &, Barral, M.T., (1998). Adsorbent properties of red mud and its use for wastewater treatment. Water Research, 32, 1314-1322. (Pubitemid 28196029)
16. Erdem, M., Altundoǧan, H.S., &, Tümen, F., (2004). Removal of hexavalent chromium by using heat-activated bauxite. Minerals Engineering, 17, 1045-1052.
17. + by a surface molecular-imprinted biosorbent. Chemical Engineering Journal, 150, 139-144.
18. Rusch, K.A., Guo, T., &, Seals, R.K., (2002). Stabilization of phosphogypsum using class C fly ash and lime: Assessment of the potential for marine applications. Journal of Hazardous Materials, B93, 167-186. (Pubitemid 34756839)
19. Reijnders, L., (2005). Disposal, uses and treatments of combustion ashes: A review, Resources. Conservation and Recycling, 43, 313-336. (Pubitemid 40018192)
20. Lin, J.X., Zhan, S.L., Fang, M.H., Qian, X.Q., &, Yang, H., (2008). Adsorption of basic dye from aqueous solution onto fly ash. Journal of Environmental Management, 87, 193-200. (Pubitemid 351147073)
21. Min, Y., Jueshi, Q., &, Ying, P., (2008). Activation of fly ash-lime systems using calcined phosphogypsum. Construction and Building Materials, 22, 1004-1008. (Pubitemid 351374656)
22. Shen, W., Zhou, M., &, Zhao, Q., (2007). Study on lime-fly ash-phosphogypsum binder. Construction and Building Materials, 21, 1480-1485. (Pubitemid 46367592)
23. Smadedi, M.M., Haddad, R.H., &, Akour, A.M., (1999). Potential use of phosphogypsum in concrete. Cement and Concrete Research, 29, 1419-1425. (Pubitemid 30538682)
24. Degirmenci, N., (2008). Utilization of phosphogypsum as raw and calcined material in manufacturing of building products. Construction and Building Materials, 22, 1857-1862. (Pubitemid 351680657)
25. Singh, M., (2002). Treating waste phosphogypsum for cement and plaster manufacture. Cement and Concrete Research, 32, 1033-1038. (Pubitemid 34614038)
26. Kumar, S., (2003). Fly ash-lime-phosphogypsum hollow blocks for walls and partitions. Building and Environment, 38, 291-295. (Pubitemid 35182082)
27. Balkaya, N., &, Cesur, H., (2008). Adsorption of cadmium from aqueous solution by phosphogypsum. Chemical Engineering Journal, 140, 247-254. (Pubitemid 351713581)
28. Ponnusami, V., Krithika, V., Madhuram, R., &, Srivastava, S.N., (2007). Biosorption of reactive dye using acid-treated rice husk: Factorial design analysis. Journal of Hazardous Materials, 142, 397-403. (Pubitemid 46413493)
29. Jaikumar, V., &, Ramamurthi, V., (2009). Statistical analysis and optimization of acid dye biosorption by brewery waste biomass using response surface methodology. Modern Applied Science, 3, 71-86.
30. Navidi, W., (2008). Statistics for engineers and scientist, New York: McGraw-Hill Companies, Inc. <
31. Cestari, A.R., Vieira, E.F.S., &, Mota, J.A., (2008). The removal of an ionic red dye from aqueous solutions using chitosan beads-The role of experimental factors on adsorption using a full factorial design. Journal of Hazardous Materials, 160, 337-343.
32. Kabbashi, N.A., Nour, A.H., Muyibi, S.A., &, Qudsieh, I.Y., (2009). Development of a wastewater treatment system for chromium removal using chitosan. International Journal of Chemical Technology, 1, 44-51.
33. Feriats, O., Matos, C.D., &, Boaventura, R., (2009). Optimization of Cu(II) biosorption onto Ascophyllum by factorial design methodology. Journal of Hazardous Materials, 167, 449-454.
34. Santos, S.C.R., &, Boaventura, R.A.R., (2008). Adsorption modeling of textile dyes by sepiolite. Applied Clay Science, 42, 137-145.
35. 2+ from aqueous solution by foam fraction. Desalination, 249, 503-506.
36. Zhao, Y., Wang, J., Luan, Z., Peng, X., Liang, Z., &, Shi, L., (2009). Removal of phosphate from aqueous solution by red mud using a factorial design. Journal of Hazardous Materials, 165, 1193-1199.
37. Lee, I.H., Kuan, Y.C., &, Chern, J.M., (2006). Factorial experimental design for recovering heavy metals from sludge with ion-exchange resin. Journal of Hazardous Materials, B148, 549-559. (Pubitemid 44667230)
38. 2 binary oxide: Experimental design approach. Adsorption, 14, 21-29.
39. Kavak, D., (2009). Removal of boron from aqueous solutions by batch adsorption on calcined alunite using experimental design. Journal of Hazardous Materials, 163, 308-314.
40. + sorption on natural and Na-exchanged clinoptilolite from Eastern Rhodopes, Bulgaria. Microporous Mesoporous Materials, 130, 32-37.
41. Akgül, M., Karabakan, A., Acar, O., &, Yürüm, Y., (2006). Removal of silver (I) from aqueous solutions with clinoptilolite. Microporous Mesoporous Materials, 94, 99-104. (Pubitemid 44189907)
42. Karabakan, A., Karabulut, S., Denizli, A., &, Yürüm, Y., (2004). Removal of silver (I) from aqueous solutions with low-rank Turkish coals. Adsorption Science and Technology, 22, 135-144.
43. Hanzlík, P., Jehlička, J., Weishauptová, Z., &, Åebek, O., (2004). Adsorption of copper, cadmium and silver from aqueous solutions onto natural carbonaceous materials, Plant. Soil and Environment, 50, 257-264. (Pubitemid 39098458)
44. Ghassabzadeh, H., Mohadespour, A., Torab-Mostaedi, M., Zaheri, P., Maragheh, M.G., &, Taheri, H., (2010). Adsorption of Ag, Cu and Hg from aqueous solutions using expanded perlite. Journal of Hazardous Materials, 177, 950-955.
45. Li, Y., Zhang, F.S., &, Xiu, F.R., (2009). Arsenic (V) removal from aqueous system using adsorbent developed from a high iron-containing fly ash. The Science of the Total Environment, 21, 5780-5786.
46. Wang, J., Ban, H., Teng, X., Wang, H., &, Ladwig, K., (2006). Impacts of pH and ammonia on the leaching of Cu(II) and Cd(II) from coal fly ash. Chemosphere, 64, 1892-1898. (Pubitemid 44092948)
47. Weng, C.H., &, Huang, C.P., (2004). Adsorption characteristics of Zn(II) from dilute aqueous solution by fly ash, Colloids and Surfaces. A. Physicochemical and Engineering Aspects, 247, 137-143. (Pubitemid 39370750)
48. Montgomery, D.C., Runger, G.C., &, Hubele, N.F., (2001). Engineering statistics, New York: Wiley.