Seven-hole hollow polyester fibers as reinforcement in sound absorption chlorinated polyethylene composites

Applied Acoustics

Volumn 73, Issue 3, 2012, Pages 243-247

  Jiang, Sheng ^a,b   Xu, Yunyan ^b   Zhang, Huiping ^a   White, Chris Branford ^c   Yan, Xiong ^a  

^a DONGHUA UNIVERSITY   (China)

^b NANTONG TEXTILE VOCATIONAL TECHNOLOGY COLLEGE   (China)

^c LONDON METROPOLITAN UNIVERSITY   (United Kingdom)

Author keywords

Chlorinated polyethylene; Mechanical property; Seven hole hollow polyester fibers; Sound absorption coefficient

Indexed keywords

ABSORPTION PEAKS; ACOUSTICAL CHARACTERISTICS; BACK CAVITIES; BREAKING STRAIN; CAVITY DEPTH; CHLORINATED POLYETHYLENE; ENGINEERING APPLICATIONS; FIBER COMPOSITE; FIBER CONTENTS; IMPEDANCE TUBES; LOW FREQUENCY RANGE; POLYESTER FIBER; RESONANCE CHARACTERISTIC; SCANNING ELECTRON MICROGRAPHS; SEVEN-HOLE HOLLOW POLYESTER FIBERS; SOUND ABSORBER; SOUND ABSORPTION; SOUND ABSORPTION COEFFICIENT; SOUND ABSORPTION COEFFICIENTS; SOUND ABSORPTION PROPERTY; SPECIFIC FREQUENCIES;

ABSORPTION; ACOUSTIC IMPEDANCE; ACOUSTIC WAVE ABSORPTION; ESTERS; FIBERS; MECHANICAL PROPERTIES; POLYESTERS; POROUS MATERIALS; SCANNING ELECTRON MICROSCOPY; SOUND INSULATING MATERIALS;

POLYETHYLENES;

EID: 80955130030     PISSN: 0003682X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apacoust.2011.09.006     Document Type: Article

References (25)

1. B.P. Seung, S.S. Dae, and J. Lee Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio Cem Concr Res 35 2005 1846 1854 (Pubitemid 41277133)
2. S.W. Kang, and J.M. Lee Sound absorption characteristics of air-gap systems in enclosed cavities J Sound Vib 259 2003 209 218
3. Pfretzschner Jaime, Cobo Pedro, and Simon Francisco Microperforated insertion units: an alternative strategy to design microperforated panels Appl Acoust 67 2006 62 73
4. F.C. Sgar, X. Olny, and N. Atalla On the use of perforations to improve the sound absorption of porous materials Appl Acoust 66 2005 625 651 (Pubitemid 40206017)
5. O. Onursal, and C. Mehmet Design of a single layer micro-perforated sound absorber by finite element analysis design of a single layer micro-perforated sound absorber by finite element analysis Appl Acoust 71 2010 79 85
6. J. Liu, and D.W. Herrin Enhancing micro-perforated panel attenuation by partitioning the adjoining cavity Appl Acoust 71 2010 120 127
7. H. Aygun, and K. Attenborough The insertion loss of perforated porous plates in a duct without and with mean air flow Appl Acoust 69 2008 506 513 (Pubitemid 351503524)
8. S. Kimihiro, M. Kiyotaka, and M. Masayuki Sound absorption of a double-leaf micro-perforated panel with an air-back cavity and a rigid-back wall: detailed analysis with a Helmholtz-Kirchhoff integral formulation Appl Acoust 71 2010 411 417
9. J.J. Wu, C.G. Li, D.B. Wang, and M.C. Gui Damping and sound absorption properties of particle reinforced Al matrix composite foams Comput Sci Technol 63 2003 569 574
10. W. Pannert, R. Winkler, and M. Merkel On the acoustical properties of metallic hollow sphere structures (MHSS) Mater Lett 63 2009 1121 1124
11. F.G. Sun, H.L. Chen, J.H. Wu, and K. Feng Sound absorbing characteristics of fibrous metal materials at high temperatures Appl Acoust 71 2010 221 235
12. B. Zhang, and T.N. Chen Calculation of sound absorption characteristics of porous sintered fiber metal Appl Acoust 70 2009 337 346
13. H.Y. Jiang, G.Q. Wu, H. Yan, and Y.A. Ecrewulov Metal rubber′s sound absorption and noise reduction performance analysis and experimental study Mech Sci Technol 26 2007 403 407
14. J. Huang, B. Sun, and G.C. Dai Sound absorption properties of lightweight reinforced thermoplastic laminates J Funct Polym 21 2008 177 181
15. H. Zhou, B. Li, and G.S. Huang Sound absorption behavior of multiporous hollow polymer micro-spheres Mater Lett 60 2006 3451 3456
16. H. Zhou, B. Li, and G.S. Huang Sound absorption characteristics of polymer microparticles J Appl Polym Sci 101 2006 2675 2679 (Pubitemid 44117531)
17. H. Zhou, B. Li, and G.S. Huang A novel composite sound absorber with recycled rubber particles J Sound Vib 304 2007 400 406
18. Y. Zou, S. Huda, and Y.Q. Yang Lightweight composites from long wheat straw and polypropylene Bioresour Technol 101 2010 2026 2033
19. C. Wu, T. Yamagishi, and Y. Nakamoto Organic hybrid of chlorinated polyethylene and hindered phenol. I dynamic mechanical properties J Polym Sci Part B: Polym Phys 38 2000 2285 2295
20. X.B. Ding, and X. Yan Study on the Piezo-damping properties of the CPE/ZKF/VGCF composites J Appl Polym Sci 102 2006 3181 3185 (Pubitemid 44619455)
21. X.B. Ding, H.P. Zhang, and X. Yan Effects of small molecular additives on the damping performance of CPE/ZKF/EBP three-component hybrids J Mater Eng 44 2009 2683 2687
22. Q.X. Liu, H.P. Zhang, and X. Yan Preparation of high-performance damping materials based on carboxylated nitrile rubber: effects of organic fillers Iranian Polym J 18 2009 401 413
23. A. Sunder, R. Hanselmann, and H. Frey Controlled synthesis of hyperbranched polyglycerols by ring-opening multibranching polymerization Macromolecules 32 1999 4240 4246
24. X. Yang, Y.S. Wang, and H.W. Yu Sound absorption properties of multilayered polymer composite materials with nonplanar interfaces Acta Mater Compos Sin 23 2006 19 23 (Pubitemid 44678052)
25. D.Y. Maa Helmholtz resonator Tech Acoust 21 2002 1 3