Fabrication and characterization of superhydrophobic polypropylene hollow fiber membranes for carbon dioxide absorption

Applied Energy

Volumn 90, Issue 1, 2012, Pages 167-174

  Lv, Yuexia ^a,b   Yu, Xinhai ^a   Jia, Jingjing ^a   Tu, Shan Tung ^a   Yan, Jinyue ^b,c   Dahlquist, Erik ^b  

^a EAST CHINA UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b MÄLARDALEN UNIVERSITY   (Sweden)

^c ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Hollow fiber membrane contactors; Hydrophobic modification; Partial wetting

Indexed keywords

CARBON DIOXIDE; CARBON FIBERS; COATINGS; CONTACT ANGLE; FIBERS; GAS ABSORPTION; HYDROPHOBICITY; POLYPROPYLENES; THERMOPLASTICS; WETTING;

ABSORPTION EXPERIMENTS; ADDITIONAL MASS; CARBON DIOXIDE ABSORPTION; COATING HOMOGENEITY; CYCLOHEXANONES; HOLLOW FIBER MEMBRANE CONTACTORS; HYDROPHOBIC MODIFICATION; LONG-TERM SYSTEM OPERATION; MEMBRANE GAS ABSORPTION; MEMBRANE SURFACE; MEMBRANE WETTING; MODIFICATION TREATMENT; MODIFIED POLYPROPYLENE; NON-SOLVENTS; PARTIAL WETTING; PERFORMANCE DETERIORATION; POLYPROPYLENE HOLLOW FIBER MEMBRANE; POLYPROPYLENE MEMBRANE; POST-COMBUSTION; POWER STATION; PROCESS EFFICIENCY; ROUGH LAYER; SUPERHYDROPHOBIC; SUPERHYDROPHOBICITY; SURFACE COATINGS;

MEMBRANES;

ABSORPTION; HYDROPHOBICITY; MASS TRANSFER; MEMBRANE; PERFORMANCE ASSESSMENT; SOLVENT;

EID: 80055031249     PISSN: 03062619     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apenergy.2010.12.038     Document Type: Article

References (46)

1. Mandal B.P., Bandyopadhyay S.S. Absorption of carbon dioxide into aqueous blends of 2-amino-2-methyl-1-propanol and monoethanolamine. Chem Eng Sci 2006, 61:5440-5447.
2. Zhao G.Y., Aziz B., Hedin N. Carbon dioxide adsorption on mesoporous silica surfaces containing amine-like motifs. Appl Energy 2010, 87:2907-2913.
3. 2 and acid gases. Energy Procedia 2009, 1:171-177.
4. 2 gas separation membrane processes for post-combustion capture. J Membr Sci 2008, 325:284-294.
5. Gabelman A., Hwang S.T. Hollow fiber membrane contactors. J Membr Sci 1999, 159:61-106.
6. Rangwala H.A. Absorption of carbon dioxide into aqueous solutions using hollow fiber membrane contactors. J Membr Sci 1996, 112:229-240.
7. Klaassen R., Feron P.H.M., Jansen A.E. Membrane contactors in industrial applications. Chem Eng Res Des 2005, 83:234-246.
8. 2 absorption using chemical solvents in hollow fiber membrane contactors. Sep Purif Technol 2005, 41:109-122.
9. Feron P.H.M., Jansen A.E. Techno-economic assessment of membrane gas absorption for the production of carbon dioxide from flue gas. Greenhouse gas control technologies 1999, 53-58. Pergamon, Oxford. B. Eliasson, P. Riemer, A. Wokaun (Eds.).
10. 4 by gas-liquid membrane contacting process. J Membr Sci 2007, 304(1-2):163-172.
11. 2 absorption. J Membr Sci 2008, 308:162-170.
12. 2 removal by hollow fiber gas-liquid contactors. Energy Convers Manage 1995, 36:415-418.
13. Lin S.H., Tung K.L., Chen W.J., Chang H.W. Absorption of carbon dioxide by mixed piperazine-alkanolamine absorbent in a plasma-modified polypropylene hollow fiber contactor. J Membr Sci 2009, 333:30-37.
14. Kim Y.S., Yang S.M. Absorption of carbon dioxide through hollow fiber membranes using various aqueous absorbents. Sep Purif Technol 2000, 21:101-109.
15. 2 absorption. Sep Sci Technol 2003, 38:271-293.
16. 2 from dilute gas streams using membrane contactors. Chem Eng Sci 2002, 57:1639-1651.
17. Porcheron F., Drozdz S. Hollow fiber membrane contactor transient experiments for the characterization of gas/liquid thermodynamics and mass transfer properties. Chem Eng Sci 2009, 64:265-275.
18. Lv Y.X., Yu X.H., Tu S.T., Yan J.Y., Dahlquist E. Wetting of polypropylene hollow fiber membrane contactors. J Membr Sci 2010, 362:444-452.
19. Erbil H.Y., Demirel A.L., Avci Y., Mert O. Transformation of a simple plastic into a superhydrophobic surface. Science 2003, 299:1377-1379.
20. Julianna A.F., Sandra E.K., Jilska M.P., Geoff W.S. Fabrication of a superhydrophobic polypropylene membrane by deposition of a porous crystalline polypropylene coating. J Membr Sci 2008, 318:107-113.
21. Stamatialis D.F., Dias C.R., Pinho M.N. Atomic force microscopy of dense and asymmetric cellulose-based membranes. J Membr Sci 1999, 160:235-242.
22. Chung T.S., Qin J.J., Huan A., Toh K.C. Visualization of the effect of die shear rate on the outer surface morphology of ultrafiltration membranes by AFM. J Membr Sci 2002, 196:251-266.
23. Franken A.C.M., Nolten J.A.M., Mulder M.H.V., Bargeman D., Smolders C.A. Wetting criteria for the application of membrane distillation. J Membr Sci 1987, 33:315-328.
24. Kim B., Harriott P. Critical entry pressure for liquids in hydrophobic membranes. J Colloid Interface Sci 1987, 115:1-8.
25. 2 removal using membrane gas-liquid contactors. Sep Purif Technol 2004, 40:133-145.
26. 2 from flue gas using hollow fiber membrane contactors without wetting. Fuel Process Technol 2007, 88:501-511.
27. González V, Hinojosa M, Guerrero C, Reyes E. Effect of the crystallization rate in the roughness of polypropylene films. ANTEC 2000 plastics: the magical solution. Special areas, society of plastics engineers, vol. 3; 2000. p. 971-5.
28. Chen J., Li J.D., Chen C.X. Surface modification of polyvinylidene fluoride (PVDF) membranes by low-temperature plasma with grafting styrene. Plasma Sci Technol 2009, 11:42-47.
29. Wenzel R.N. Resistance of solid surfaces to wetting by water. Ind Eng Chem 1936, 28:988-994.
30. 2 loading on porous polypropylene membranes intended for use as contactors. J Membr Sci 2004, 229:147-157.
31. Barbe A.M., Hogan P.A., Johnson R.A. Surface morphology changes during initial usage of hydrophobic, microporous polypropylene membranes. J Membr Sci 2000, 172:149-156.
32. Xu Z.K., Wang J.L., Shen L.Q., Men D.F., Xu Y.Y. Microporous polypropylene hollow fiber membrane: part I. Surface modification by the graft polymerization of acrylic acid. J Membr Sci 2002, 196:221-229.
33. Dickson J.M., Childs R.F., McCarry B.E., Gagnon D.R. Development of a coating technique for the internal structure of polypropylene microfiltration membranes. J Membr Sci 1998, 148:25-36.
34. 2S from gas streams via a membrane absorption method. Chem Eng Sci 1998, 53:1111-1119.
35. Li K., Kong J.F., Wang D.L., Teo W.K. Tailor-made asymmetric PVDF hollow fiber for soluble gas removal. AIChE J 1999, 45:1211-1219.
36. 2S to ultra low concentrations using an asymmetric hollow fiber membrane module. Sep Purif Technol 2002, 27:33-40.
37. 2 from flue gas using PVDF hollow fiber membranes in a gas-liquid contactor. J Membr Sci 2008, 319:29-37.
38. 2 using hollow fiber modules/contactors. Sep Purif Technol 2004, 35:125-131.
39. Chanachaia A., Meksup K., Jiraratananon R. Coating of hydrophobic hollow fiber PVDF membrane with chitosan for protection against wetting and flavor loss in osmotic distillation process. Sep Purif Technol 2010, 72:217-224.
40. 2 absorption. J Membr Sci 2010, 348:260-267.
41. Atchariyawut S., Feng C.S., Wang R., Jiraratananon R., Liang D.T. Effect of membrane structure on mass-transfer in the membrane gas-liquid contacting process using microporous PVDF hollow fibers. J Membr Sci 2006, 285:272-281.
42. Wang D.L., Li K., Teo W.K. Porous PVDF asymmetric hollow fiber membranes prepared with the use of small molecular additives. J Membr Sci 2000, 178:13-23.
43. Boributh S., Chanachai A., Jiraratananon R. Modification of PVDF membrane by chitosan solution for reducing protein fouling. J Membr Sci 2009, 342:97-104.
44. Koonaphapdeelert S., Li K. The development of ceramic hollow fiber membranes for a membrane contactor. Desalination 2006, 200:581-583.
45. Koonaphapdeelert S., Li K. Preparation and characterization of hydrophobic ceramic hollow fibre membrane. J Membr Sci 2007, 291:70-76.
46. Koonaphapdeelert S., Wu Z.T., Li K. Carbon dioxide stripping in ceramic hollow fibre membrane contactors. Chem Eng Sci 2009, 64:1-8.