Effect of fly ash on the durability properties of high strength concrete

Procedia Engineering

Volumn 14, Issue , 2011, Pages 1149-1156

  Nath, P ^a   Sarker, P ^a  

^a CURTIN UNIVERSITY   (Australia)

Author keywords

Chloride permeability; Drying shrinkage; Durability; Fly ash; Sorptivity

Indexed keywords

CEMENT PRODUCTION; CHLORIDE IONS; CHLORIDE PERMEABILITY; CLASS-F; CONCRETE MIXTURE; CONCRETE SAMPLES; CONCRETE SPECIMENS; DRYING SHRINKAGE; DRYING SHRINKAGES; DURABILITY PROPERTY; FLY ASH CONCRETES; HIGH STRENGTH CONCRETES; PARTIAL REPLACEMENT; POSITIVE EFFECTS; SORPTIVITY; SUPPLEMENTARY CEMENTITIOUS MATERIAL; TEST SPECIMENS; WESTERN AUSTRALIA;

BIOPHYSICS; CARBON DIOXIDE; CEMENTS; CHLORINE COMPOUNDS; COMPRESSIVE STRENGTH; CONCRETE MIXERS; DRYING; DURABILITY; SHRINKAGE; STRUCTURAL DESIGN;

FLY ASH;

EID: 80054790579     PISSN: 18777058     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1016/j.proeng.2011.07.144     Document Type: Conference Paper

References (19)

1. ACI committee 211 (2008). Guide for selecting proportions for High-Strength concrete using Portland cement and other cementitious materials, ACI 211.4R-08, December.
2. AS 1012.13 (1992). Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory, Standards Australia.
3. AS 3972 (1997). Portland and blended cements. Standards Australia, February.
4. ASTM C 618 (2008). Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete.
5. ASTM C 1585 (2004). Standard test method for measurement of rate of absorption of water by hydraulic cement concretes.
6. ASTM C 1202 (2007). Standard test method for electrical indication of concrete's ability to resist chloride ion penetration.
7. Atis CD (2003). High-Volume Fly Ash Concrete with High Strength and Low Drying Shrinkage, Journal of Materials in Civil Engineering. 15( 2), pp. 153-156.
8. Camoes A, Aguiar B, and Jalali S (2003). Durability of low cost high performance fly ash concrete. International Ash Utilization Symposium, Centre for Applied Energy Research, University of Kentuky.
9. Cao HT, Bucea L, Meek E, and Yozghatlian S (1996). Formulation and Durability of Fly Ash Blended Cement, CSIRO Report BRE 030, June.
10. Carette G, Bilodeau A, Chevrier RL, and Malhotra VM (1993). Mechanical properties of concrete incorporating high volumes of fly ash from sources in the U.S. ACI Material Journal, 90, pp. 535-544.
11. Chindaprasirt P, Homwuttiwong S, Sirivivatnanon V (2004). Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar. Cement and Concrete Research, 34, pp. 1087-1092.
12. Langley WS, Carette GG, and Malhotra VM (1989). Structural concrete incorporating high volumes of ASTM class F fly ash. ACI Material Journal, 86, pp. 507-514.
13. Malhotra VM (1990). Durability of concrete incorporating high-volume of low-calcium (ASTM class F) fly ash. Cement and Concrete Composites, 12(4), pp. 271-277.
14. Malhotra VM (2002). Introduction: sustainable development and concrete technology. Concrete International, 24(7), July.
15. Naik TR, Singh SS, and Hossain MM (1994). Permeability of concrete containing large amounts of fly ash. Cement and Concrete Research, 24(5), pp. 913-922.
16. Papadakis VG (1999). Effect of fly ash on Portland cement systems Part I. Low-calcium fly ash. Cement and Concrete Research, 29, pp. 1727-1736.
17. Papworth F, Grace W (1985). Designing for Concrete Durability in Marine Environs. Concrete 85 Conference, Brisbane, October.
18. Siddique R (2004). Performance characteristics of high-volume Class F fly ash concrete. Cement and Concrete Research, 34, pp. 487-493.
19. Tasdemir C (2003). Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete. Cement and Concrete Research, 33, pp. 1637-1642.