Treatment and recycling of asbestos-cement containing waste

Journal of Hazardous Materials

Volumn 195, Issue , 2011, Pages 391-397

  Colangelo, F ^a   Cioffi, R ^a   Lavorgna, M ^b   Verdolotti, L ^b   De Stefano, L ^c  

^a UNIVERSITY OF NAPLES PARTHENOPE   (Italy)

^b CNR   (Italy)

^c CNR IMM   (Italy)

Author keywords

Asbestos waste; Inertization; Milling; Mortars; Recycling

Indexed keywords

BINDING PHASIS; CURING TIME; ENDOTHERMIC EFFECTS; FINE POWDERS; HIGH ENERGY; HYDRATION KINETICS; HYDRAULIC BEHAVIOR; HYDRAULIC LIME; INDUSTRIAL BUILDINGS; INERTIZATION; MILLED POWDERS; MILLING TIME; MINERAL COMPONENT; MORPHOLOGICAL TRANSFORMATIONS; POWDER-BASED; RECYCLING PROCESS; SCANNING ELECTRONS; STRETCHING MODES; TECHNOLOGICAL EFFICACY; TEST SETS;

CEMENTS; COMPRESSIVE STRENGTH; CONSTRUCTION EQUIPMENT; ENERGY CONVERSION; HYDRAULICS; INDUSTRIAL WASTE TREATMENT; INFRARED SPECTROSCOPY; LIME; MECHANICAL PROPERTIES; MILLING (MACHINING); MORTAR; OFFICE BUILDINGS; POWDERS; RECYCLING; RISK MANAGEMENT; SCANNING ELECTRON MICROSCOPY; SERPENTINE; THERMOANALYSIS; WASTE DISPOSAL; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

ASBESTOS;

ASBESTOS; CALCIUM OXIDE; CEMENT; CHRYSOTILE; MINERAL;

ASBESTOS; CEMENT; COMPRESSIVE STRENGTH; HYDRATION; LANDFILL; LIME; MILL; MILLING; MINERALOGY; MORTAR; REACTION KINETICS; RECYCLING; RISK ASSESSMENT; ROOF; STANDARD (REGULATION); WASTE DISPOSAL; WASTE TREATMENT;

ARTICLE; BUILDING MATERIAL; COMPRESSIVE STRENGTH; EVALUATION; HYDRATION; MINERALOGY; MORPHOLOGY; POWDER; RECYCLING; RISK MANAGEMENT;

ASBESTOS; CONSTRUCTION MATERIALS; ENVIRONMENTAL REMEDIATION; MICROSCOPY, ELECTRON, SCANNING; RECYCLING; SPECTROPHOTOMETRY, INFRARED; X-RAY DIFFRACTION;

EID: 80054115890     PISSN: 03043894     EISSN: 18733336     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2011.08.057     Document Type: Article

References (33)

1. Bianchi C., Bianchi T. Asbestos, A Century of Experimentation on Humans 2002, ISTAT (Italian Institute for Statistic), Hammerle, Trieste, Italy.
2. Chapman G. World Mineral Statistics, Mineral Resources 2000, vol. 28-29. British Geological Survey. http://www.bgs.ac.uk/.
3. EU Commission Decision of 3 May 2000 replacing Decision 94/3/EC establishing a list of wastes pursuant to Article 1(a) of Council Directive 75/442/EEC on waste.
4. EU Council Decision 94/904/EC establishing a list of hazardous waste pursuant to Article 1(4) of Council Directive 91/689/EEC on hazardous waste.
5. Gualtieri A.F., Tartaglia A. Thermal decomposition of asbestos and recycling in traditional ceramics. J. Eur. Ceram. Soc. 2000, 20:1409-1418.
6. Leonelli C., Veronesi P., Beccaccini D.N., Rivasi M.R., Barbieri L., Andreola F., Lancellotti I., Rabitti D., Pellicani G.C. Microwave thermal inertization of asbestos containing waste and its recycling in traditional ceramics. J. Hazard. Mater. 2006, B135:149-155.
7. Gualtieri A.F., Cavenati C., Zanatto I., Meloni M., Elmi G., Lassinantti Gualtieri M. The transformation sequences of cement-asbestos slates up to 1200°C and safe recycling of the reaction product in stone ware tile mixtures. J. Hazard. Mater. 2008, 152:563-570.
8. Chan Y.M., Agamauthu P., Mahalingam R. Solidification and stabilization of asbestos waste from an automobile brake manufacturing facility using cement. J. Hazard. Mater. 2000, B77:209-226.
9. Plescia P., Gizzi D., Benedetti S., Camilucci L., Fanizza C., De Simone P., Paglietti F. Mechanochemical treatment to recycling asbestos-containing waste. Waste Manage. 2003, 23:209-218.
10. 3 nanoparticles. J. Alloys Compd. 2009, 476:894-902.
11. 4 by mechanochemical processing. Powder Technol. 2009, 191:235-239.
12. Boldyrev V.V. Mechanochemistry and Mechanical Activation of Solids 2004, Imperial College Press, London.
13. Hall K., Harrowfield M., Hart J., McCormick G. Mechanochemical reaction of DDT with calcium hydride. Environ. Sci. Technol. 1996, 30:3401-3407.
14. Loiselle S., Branca M., Mulas G., Cocco G. Selective mechanochemical dehalogenation of chlorobenzenes over calcium hydride. Environ. Sci. Technol. 1996, 31:261-265.
15. Cocco G., Monagheddu M., Mulas G., Doppiu S., Raccanelli S. Reduction of polychlorinated dibenzodioxins and dibenzofurans in contaminated muds by mechanically induced combustion reactions. Environ. Sci. Technol. 1999, 33:2485-2488.
16. 4. Waste Manage. 2003, 23:315-319.
17. 34 contaminated alumina and silica after mechanochemical treatment. Chemosphere 2008, 70:1068-1076.
18. Milosevic S., Tomasevic-Canovic M., Dimitrijevic R., Petrov M., Djuricic M., Zivanovic B. Amorphization of aluminosilicate minerals during micronization process. Ceram. Bull. 1992, 71:771-775.
19. Lavorgna M., De Stefano L., Cioffi R. Reuse of asbestos-waste milled materials, vol. 1. Proceed. III Intern. Conf. Valorization and Recycling of Industrial Waste 2001, 159-164. M. Pelino (Ed.).
20. Cioffi R., Colangelo F., Caputo D., Liguori B. Influence of High Volumes of Ultra-Fine Additions on Self-Compacting Concrete, Superplasticizers and Other Chemical Admixtures in Concrete 2006, 117-136. American Concrete Institute SP-239, Farmington hills, MI, USA. V.M. Malhotra (Ed.).
21. Franke L., Sisomphon K. A new chemical method for analyzing free calcium hydroxide content in cementing material. Cem. Concr. Res. 2004, 34:1161-1165.
22. UNI EN 196-1: Standard Methods of Testing Cement - Part 1: Determination of Strength 2005.
23. Saito F. Dehalogenation from organic compounds by mechanochemical method - in the case of polyvinyl chloride. Annual Report of Hosokawa Powder Technol. Foundation 1998, 6:120-123.
24. Saito F. Mechanochemical effects by grinding and its application to materials processing. Ceramics 1999, 34:844-847.
25. Saito F. Engineering application of mechanochemistry - materials synthesis and wastes disposal. Mater. Life 1999, 11:152-156.
26. Saito F. Mechanochemistry and resources wastes processing. Kinzoku 1999, 69:1082-1088.
27. Valenti G.L., Santoro L., Volpicelli G. Hydration of granulated blast furnace slag in the presence of phosphogypsum. Thermochim. Acta 1984, 78:101-112.
28. Santoro L., Aletta I., Valenti G.L. Hydration of mixture containing fly ash, lime and phosphogypsum. Thermochim. Acta 1986, 96:71-80.
29. Ramachandran V.S. Application of DTA in Cement Chemistry 1969, Chemical Publishing Co. Inc., New York.
30. Murat M. Stabilité thermique des aluminates de calcium hydratés et phases apparentées. Caractérisation par les méthodes thermoanalytiques, vol. 5. Int. Semin. Aluminates Calcium 1982, 9-65.
31. Valenti G.L., Cioffi R., Santoro L., Ranchetti S. Influence of chemical and physical properties of Italian fly ashes on reactivity towards lime, phosphogypsum and water. Cem. Concr. Res. 1988, 18:91-102.
32. Beretka J., Cioffi R., Santoro L., Valenti G.L. Cementitious mixtures containing industrial process wastes suitable for the manufacture of preformed building materials. J. Chem. Technol. Biotechnol. 1994, 59:243-247.
33. Cioffi R., Marroccoli M., Martone G., Santoro L. Utilization of zeolite-rich tuff for the manufacture of building materials based on calcium silicate and trisulphoaluminate hydrates. Thermochim. Acta 1997, 306:93-98.