A transient thermal model for friction stir weld. Part I: The model

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 42, Issue 10, 2011, Pages 3218-3228

  Zhang, X X ^a   Xiao, B L ^a   Ma, Z Y ^a  

^a INSTITUTE OF METAL RESEARCH   (China)

Author keywords

[No Author keywords available]

Indexed keywords

DOMINANT FACTOR; FRICTION COEFFICIENTS; FRICTION STIR WELDS; HEAT GENERATION RATE; INVERSE SOLUTION; NEGATIVE FEEDBACK MECHANISM; SELF-CONSISTENCY; STEADY-STATE CONDITION; STEADY-STATE LEVEL; TEMPERATURE DEPENDENT; THERMAL MODEL; TRANSIENT THERMAL MODELS;

CERIUM ALLOYS; FRICTION; HEAT GENERATION; POWER QUALITY; STATE FEEDBACK; THERMOGRAPHY (TEMPERATURE MEASUREMENT); TRIBOLOGY; WELDING;

FRICTION STIR WELDING;

EID: 80053650180     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-011-0729-5     Document Type: Article

References (49)

1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Church, P. Templesmith, and C. Dawes: International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.9, 1991.
2. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1-78.
3. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling, and C.C. Bampton: Scripta Mater., 1997, vol. 36, pp. 69-75.
4. G. Liu, L.E. Murr, C.S. Niou, J.C. McClure, and F.R. Vega: Scripta Mater., 1997, vol. 37, pp. 355-61.
5. L.E. Murr, G. Liu, and J.C. McClure: J. Mater. Sci., 1998, vol. 33, pp. 1243-51.
6. Y.S. Sato, H. Kokawa, M. Enmoto, and S. Jogan: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2429-37.
7. H.B Schmidt and J.H. Hattel: Scripta Mater., 2008, vol. 58, pp. 332-37.
8. S. Xu, X. Deng, and A.P. Reynolds: Sci. Technol. Weld. Join., 2001, vol. 6, pp. 191-93.
9. H. Schmidt and J. Hattel: Model. Simul. Mater. Sci. Eng., 2005, vol. 13, pp. 77-93.
10. Q.Z. Zhang, L.W. Zhang, W.W. Liu, X.G. Zhang, W.H. Zhu, and S. Qu: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 737-43.
11. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng. A, 2006, vol. 419, pp. 389-96.
12. Z. Zhang and H.W. Zhang: Int. J. Adv. Manuf. Technol., 2008, vol. 37, pp. 279-93.
13. R. Nandan, G.G. Roy, and T. DebRoy: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1247-59.
14. R. Nandan, G.G. Roy, T.J. Lienert, and T. DebRoy: Acta Mater., 2007, vol. 55, pp. 883-95.
15. A. Arora, R. Nandan, A.P. Reynolds, and T. DebRoy: Scripta Mater., 2009, vol. 60, pp. 13-16.
16. A.P. Reynolds, W. Tang, Z. Khandkar, J.A. Khan, and K. Lindner: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 190-99.
17. D. Santiago, S. Urquiza, G. Lombera, and L. Vedia: Soldagem Insp. São Paulo., 2009, vol. 14, pp. 248-56.
18. S. Guerdoux and L. Fourment: Model. Simul. Mater. Sci. Eng., 2009, vol. 17, pp. 075001-32.
19. C. Hamilton, A. Sommers, and S. Dymek: Int. J. Mach. Tools Manuf., 2009, vol. 49, pp. 230-38.
20. Z. Zhang, Y.L. Liu, and J.T. Chen: Int. J. Adv. Manuf. Technol., 2009, vol. 45, pp. 889-95.
21. G. Buffa and L. Fratini: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 239-46.
22. A. Bastier, M.H. Maitournam, K. Dang, and F. Roger: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 278-88.
23. H.N.B. Schmidt and J. Hattel: Int. J. Offshore Polar. Eng., 2004, vol. 14, pp. 296-304.
24. Y.J. Chao and X. Qi: Proc. 1st Int. Symp. on Friction Stir Welding, TWI, Thousand Oaks, CA, June 1999, pp. 31-38.
25. Ø. Frigaard, Ø. Grong, and O.T. Midling: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1189-98.
26. M. Song and R. Kovacevic: Int. J. Mach. Tools Manuf., 2003, vol. 43, pp. 605-15.
27. C. Chen and R. Kovacevic: Mach. Tools Manuf., 2003, vol. 43, pp. 1319-26.
28. M.Z.H. Khandkar, J.A. Khan, and A.P. Reynolds: Sci. Technol. Weld. Join., 2003, vol. 8, pp. 165-74.
29. H. Schmidt, J. Hattel, and J. Wert: Model. Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 143-57.
30. H. Schmidt and J. Hattel: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 176-86.
31. M.J. Peel, A. Steuwer, P.J. Withers, T. Dickerson, Q. Shi, and H. Shercliff: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2183-93.
32. A. Anders, Larsen, M. Bendsøe, J. Hattel, and H. Schmidt: Struct. Multidisc. Optim., 2009, vol. 38, pp. 289-99.
33. ASM Handbook, Friction, Lubrication, and Wear Technology, P.J. Blau, ed., ASM INTERNATIONAL, Materials Park, OH, 1992, vol. 18, pp. 27-69.
34. M. Maalekian, E. Kozeschnik, H.P. Brantner, and H. Cerjak: Acta Mater., 2008, vol. 56, pp. 2843-55.
35. A. Sluzalec: Int. J. Mech. Sci., 1990, vol. 32, pp. 467-78.
36. M. Maalekian, E. Kozeschnik, H.P. Brantner, and H. Cerjak: in Mathematical Modelling of Weld Phenomena 8, H. Cerjak, H.K.D.H. Bhadeshia, and E. Kozeschnik, eds., Verlag der Technischen Universitat Graz, Graz, 2007, pp. 881-90.
37. X.X. Zhang, B.L. Xiao, and Z.Y. Ma: Metall. Mater. Trans. A. DOI:10.1007/s11661-011-0730-z.
38. M.N. Ozisik: Heat Conduction, John Wiley & Sons Inc., Canada, 1993, pp. 1-36.
39. F.C. Liu and Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2378-88.
40. Recommended Values of Thermophysical Properties for Selected Commercial Alloys, C.M. Kenneth, ed., Woodhead Publishing Ltd., Abington, England, 2002, pp. 64-67.
41. Y.S. Sato, M. Urat, and H. Kokawa: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 625-35.
42. W.J. Arbegast and P.J. Hartley: Proc. 5th Int. Conf. on Trends in Welding Research, Pine Mountain, GA, June 1-5, 1998, pp. 541-46.
43. Friction Data Guide: An Engineering Study of Coefficient of Friction of Materials and Coatings, Slide-Chart Presentation from General Magnaplate Corp., Linden, NJ, 1988.
44. H.S. Kong and M.F. Ashby: Engineering Department Report, Cambridge University, Cambridge, United Kingdom, 1991.
45. C.B. Zhang, X.J. Zhu, and L.J. Li: 87th FABTECH International and AWS Welding Show Professional Program, Atlanta, GA, 2006, pp. 151-56.
46. Z.H. Tao, M.R. Lovell, and J.C. Yang: Wear, 2004, vol. 256, pp. 664-70.
47. ASM Specialty Handbook, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 1993, p. 392.
48. H. Atharifar, D.C. Lin, and R. Kovacevic: J. Mater. Eng. Perform., 2009, vol. 18, pp. 339-50.
49. P. Cavaliere, G. Campanile, F. Panella, and A. Squillace: J. Mater. Process. Technol., 2006, vol. 180, pp. 263-70.