Improvement of the design process of matrix converter platforms using the switching state matrix averaging simulation method

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 1, 2012, Pages 220-234

  Ibarra, Edorta ^a   Kortabarria, Iñigo ^a   Andreu, Jon ^a   De Alegría, Iñigo Martínez ^a   Martin, José Luis ^a   Ibañez, Pedro ^a,b  

^a UNIVERSITY OF THE BASQUE COUNTRY UPV EHU   (Spain)

^b TECNALIA RESEARCH AND INNOVATION   (Spain)

Author keywords

Matrix converter (MC); modulation and control; simulation; Switching State Matrix Averaging method

Indexed keywords

AC/AC CONVERTER; COMPLEX PLATFORM; COMPUTATIONAL LOADS; DESIGN PROCESS; HIGH MODULATION FREQUENCY; MATRIX CONVERTER; MC SIMULATION; SIMULATION; SIMULATION METHODS; SIMULATION RESULT; SIMULATION TIME; STATE MATRICES; STEADY STATE; TUNING TIME;

MODULATION;

COMPUTER SIMULATION;

EID: 80053629041     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2130504     Document Type: Article

References (39)

1. P. Wheeler, J. Rodriguez, J. Clare, L. Empringham, and A. Weinstein, "Matrix converters: A technology review," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 276-288, Apr. 2002.
2. D. Casadei, G. Serra, A. Tani, and Z. Luca, "Matrix converter modulation strategies: A new general approach based on space-vector representation of the switch state," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 370-381, Apr. 2002.
3. J. Andreu, J. M. de Diego, I. M. de Alegría, I. Kortabarria, J. L. Martín, and S. Ceballos, "New protection circuit for high speed switching and start-up of a practical matrix converter," IEEE Trans. Ind. Electron., vol. 55, no. 8, pp. 3100-3114, Aug. 2008.
4. D. Chen and T. Liu, "Optimal controller design for a matrix converter based surface mounted PMSM drive system," IEEE Trans. Power Electron., vol. 18, no. 4, pp. 1034-1046, Jul. 2003.
5. Q. Gao, G. Asher, M. Sumner, and L. Empringham, "Position estimation of a matrix-converter-fed ac PM machine from zero to high speed using PWM excitation," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2030-2038, Jun. 2009.
6. C. Ortega, A. Arias, C. Caruana, J. Balcells, and G. Asher, "Improved waveform quality in the direct torque control of matrix-converter-fed PMSM drives," IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2101-2110, Jun. 2010.
7. R. Bucknall and K. Ciaramella, "On the conceptual design and performance of a matrix converter for marine electric propulsion," IEEE Trans. Power Electron., vol. 25, no. 6, pp. 1497-1508, Jun. 2010.
8. "Environmentally friendly motor drives matrix converters," Yaskawa Elect. Corp., Waukegan, IL, Oct. 2006.
9. R. Cardenas, R. Pena, P. Wheeler, J. Clare, and G. Asher, "Control of the reactive power supplied by a WECS based on an induction generator fed by a matrix converter," IEEE Trans. Ind. Electron., vol. 56, no. 2, pp. 429-438, Feb. 2009.
10. R. Cardenas, R. Pena, G. Tobar, J. Clare, P. Wheeler, and G. Asher, "Stability analysis of a wind energy conversion system based on a doubly fed induction generator fed by amatrix converter," IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4194-4206, Oct. 2009.
11. S. Lopez Arevalo, P. Zanchetta, P. Wheeler, A. Trentin, and L. Empringham, "Control and implementation of a matrix-converter-based ac ground power-supply unit for aircraft servicing," IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2076-2084, Jun. 2010.
12. D. Casadei, G. Serra, A. Tani, and L. Zarri, "Optimal use of zero vectors for minimizing the output current distortion in matrix converters," IEEE Trans. Ind. Electron., vol. 56, no. 2, pp. 326-336, Feb. 2009.
13. M. Y. Lee, P. Wheeler, and C. Klumpner, "Space-vector modulated multilevel matrix converter," IEEE Trans. Ind. Electron., vol. 57, no. 10, pp. 3385-3394, Oct. 2010.
14. R. Gupta, K. Mohapatra, A. Somani, and N. Mohan, "Direct- matrixconverter-based drive for a three-phase open-end-winding ac machine with advanced features," IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4032-4042, Dec. 2010.
15. H. Hojabri, H. Mokhtari, and L. Chang, "A generalized technique of modeling, analysis, and control of a matrix converter using SVD," IEEE Trans. Ind. Electron., vol. 58, no. 3, pp. 949-959, Mar. 2011.
16. H. Nguyen, H.-H. Lee, and T.-W. Chun, "Input power factor compensation algorithms using a new direct-SVM method for matrix converter," IEEE Trans. Ind. Electron., vol. 58, no. 1, pp. 232-243, Jan. 2011.
17. F. Bradaschia, M. Cavalcanti, F. Neves, and H. de Souza, "A modulation technique to reduce switching losses in matrix converters," IEEE Trans. Ind. Electron., vol. 56, no. 4, pp. 1186-1195, Apr. 2009.
18. P. Correa, J. Rodriguez, M. Rivera, J. Espinoza, and J. Kolar, "Predictive control of an indirect matrix converter," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1847-1853, Jun. 2009.
19. D. Maksimovic, A. M. Stankovic, V. J. Thottuvelil, and G. C. Verghese, "Modeling and simulation of power electronic converters," Proc. IEEE, vol. 89, no. 6, pp. 898-912, Jun. 2001.
20. B. S. Borowy and E. T. Wagner, "Fast computation of Z-type network parameters for stability analysis of power electronics converter systems," in Proc. IEEE COMPEL, Jun. 2002, pp. 11-17.
21. B. Busco, P. Marino, M. Porzio, R. Schiavo, and F. Vasca, "Digital control and simulation for power electronic apparatus in dual voltage railway locomotive," IEEE Trans. Power Electron., vol. 18, no. 5, pp. 1146-1157, Sep. 2003.
22. J. Jacobs, D. Detjen, C. Karipidis, and R. W. De Doncker, "Rapid prototyping tools for power electronic systems: Demonstration with shunt active power filters," IEEE Trans. Power Electron., vol. 19, no. 2, pp. 500-507, Mar. 2004.
23. F. Iov, F. Blaabjergg, A. D. Hansen, and Z. Chen, "Comparative study of different implementations for induction machine model in Matlab/ Simulink for wind turbine simulations," in Proc. IEEE COMPEL, Jun. 2002, pp. 58-63.
24. D. Linzen and R. W. De Doncker, "Simulation of power losses with MATLAB/Simulink using advanced power device models," in Proc. IEEE COMPEL, Jun. 2002, pp. 71-75.
25. A. Prodic and D. Maksimovic, "Mixed-signal simulation of digitally controlled switching converters," in Proc. IEEE COMPEL, Jun. 2002, pp. 100-105.
26. F. Vasca, L. Iannelli, M. K. Camlibel, and R. Frasca, "A new perspective formodeling power electronics converters: Complementarity framework," IEEE Trans. Power Electron., vol. 24, no. 2, pp. 456-468, Feb. 2009.
27. H. Y. Kanaan, H. Fortin-Blanchette, K. Al-Haddad, R. Chaffai, L. Duguay, and F. Fnaiech, "Linear control design for a current-injection-based threephase unity-power-factor rectifier," IEEE Trans. Ind. Electron., vol. 51, no. 2, pp. 429-438, Apr. 2004.
28. R. Champagne, L. A. Dessaint, H. Fortin-Blanchette, and G. Sybille, "Analysis and validation of a real-time AC drive simulator," IEEE Trans. Power Electron., vol. 19, no. 2, pp. 336-345, Mar. 2004.
29. J. Andreu, I. M. de Alegría, I. Kortabarria, S. Ceballos, and I. Gabiola, "Switching frequency behaviour for a practical matrix converter," in Proc. IECON, Nov. 2006, pp. 1667-1672.
30. K. Shinohara and K. Yamamoto, "Technical trends of direct AC/AC converters," IEEJ Trans. Ind. Appl., vol. 126, no. 9, pp. 1161-1170, Dec. 2006.
31. J.-K. Kang, H. Hara, A. Hava, E. Yamamoto, E. Watanabe, and T. Kume, "The matrix converter drive performance under abnormal input voltage conditions," IEEE Trans. Power Electron., vol. 17, no. 5, pp. 721-730, Sep. 2002.
32. L. Huber and D. Borojevic, "Space vector modulation with unity input power factor for forced commutated cycloconverters," in Conf. Rec. IEEE IAS Annu. Meeting, Sep./Oct. 1991, vol. 1, pp. 1032-1041.
33. H. Camblong, I. de Alegria, M. Rodriguez, and G. Abad, "Experimental evaluation of wind turbines maximum power point tracking controllers," Energy Convers. Manag., vol. 47, no. 18/19, pp. 2846-2858, Nov. 2006.
34. M. Chinchilla, S. Arnaltes, and J. Burgos, "Control of permanent-magnet generators applied to variable-speed wind-energy systems connected to the grid," IEEE Trans. Energy Convers., vol. 21, no. 1, pp. 130-135, Mar. 2006.
35. C. Dufour, J. Belanger, and S. Abourida, "Accurate simulation of a 6-pulse inverter with real-time event compensation in ARTEMIS," Math. Comput. Simul., vol. 63, no. 3-5, pp. 161-172, Nov. 2003.
36. B. De Kelper, L. Dessaint, K. Al-Haddad, and H. Nakra, "A comprehensive approach to fixed-step simulation of switched circuits," IEEE Trans. Power Electron., vol. 17, no. 2, pp. 216-224, Mar. 2002.
37. B. De Kelper, L. Dessaint, V. Do, and J.-C. Soumagne, "An algorithm for accurate switching representation in fixed-step simulation of power electronics," in Proc. IEEE Power Eng. Soc. Winter Meeting Conf., Piscataway, NJ, Jan. 2000, vol. 1, pp. 762-767.
38. K. Lian and P. Lehn, "Real-time simulation of voltage source converters based on time average method," IEEE Trans. Power Syst., vol. 20, no. 1, pp. 110-118, Feb. 2005.
39. N. Burany, "Safe control of 4-quadrant switches," in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 1989, vol. 2, pp. 1190-1194.