Micro-mechanical prediction of UD laminates behavior under combined compression up to failure: Influence of matrix degradation

Journal of Composite Materials

Volumn 45, Issue 22, 2011, Pages 2317-2333

  Feld, Nicolas ^a   Allix, Olivier ^a   Baranger, Emmanuel ^a   Guimard, Jean Mathieu ^b  

^a CNRS   (France)

^b AIRBUS GROUP INNOVATIONS   (Germany)

Author keywords

composites; damage; defects; energy dissipation; kinking; modeling

Indexed keywords

CARBON FIBER REINFORCED POLYMER; COMPRESSION BEHAVIOR; CONSTITUTIVE BEHAVIORS; CRITICAL STRESS; DAMAGE; DISSIPATED ENERGY; EXPERIMENTAL DATA; FAILURE STRESS; FIBER MISALIGNMENTS; FIBER WAVINESS; KINKING; MAIN EFFECT; MATRIX; MICRO-MECHANICAL; MICRO-STRUCTURAL; MICROBUCKLING; MIXED LOADING; PRE-STRESS; STATISTICAL ENERGY; THREE PARAMETERS;

CARBON FIBERS; COMPOSITE MATERIALS; DEFECTS; ENERGY DISSIPATION; FIBERS; MODELS; POLYMER MATRIX COMPOSITES;

FAILURE ANALYSIS;

ABSORPTION; BUCKLING; CARBON FIBERS; COMPRESSION; ENERGY; FAILURE; FIBER KINKING; HARDENING; LAMINATES; MICROSTRUCTURE; REINFORCED PLASTIC; STATISTICAL ANALYSIS;

EID: 80053613505     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998311401084     Document Type: Article

References (54)

1. Failure criteria in fibre reinforced polymer composites: the world-wide failure exercise. Hinton MJ Kaddour AS Soden PD, ed. Amsterdam, Netherlands: Elsevier Science ; 2004 :
2. Johnson AF, Pickett AK. Numerical modelling of composite structures under impact loads. Le Journal de Physique IV. 2000 ; 10: Pr9-509 - Pr9-514
3. Ladevèze P In: Comptesrendus des Journées Nationales sur les Composites 5. Paris: Pluralis ; 1986: 667-683.
4. Ladevèze P, Le Dantec E. Damage modeling of the elementary ply for laminated composites. Compos Sci Technol. 1992 ; 43: 257-267
5. Allix O, Ladevèze P. Interlaminar interface modelling for the prediction of delamination. Compos Struct. 1992 ; 22: 235-242 (Pubitemid 23582976)
6. Allix O, Feissel P, Thévenet P. A delay damage mesomodel of laminates under dynamic loading: basic aspects and identification issues. Comput Struct. 2003 ; 81: 1177-1191
7. Budiansky B, Fleck NA. Compressive failure of fiber composites. J Mech Phys Solids. 1993 ; 41: 183-211
8. Guillon D, Rivallant S, Barrau J-J, Petiot C, Thévenet P, Pechnik N In: Journées Nationales sur les Composites 15. Paris: Pluralis ; 2006: 8-8.
9. Dow NF, Gruntfest IJ Determination of most needed, potentially possible improvements in materials for ballistic and space vehicles. Tech. Rep. TIS R60SD389, General Electric Co.: ; 1960 :
10. Effendi RR, Barrau J-J, Guedra-Desgeorges D. Failure mechanism analysis under compression loading of unidirectional carbon/epoxy composites using micromechanical modelling. Compos Struct. 1995 ; 31: 87-98
11. Rosen BW. Mechanics of composite strengthening. In: Fiber Composite Materials: Papers Presented at a Seminar of the American Society for Metals, October 17 and 18, 1964.. 1965 ;: 37-37
12. Hayashi T In: Aircraft Design Technical Meeting. Los Angeles, CA ; 1965: 566-580.
13. Schuerch HU. Prediction of compression strength in uniaxial boron fibermetal matrix composite materials. AIAA J. 1966 ; 4: 102-106
14. Piggott MR, Harris B. Compression strength of carbon, glass and kevlar-49 fibre-reinforced polyester resins. J Mater Sci. 1980 ; 15: 2523-2538 (Pubitemid 11447783)
15. Wisnom M. Effect of shear stresses in indirect compression tests of unidirectional carbon fiber/epoxy. AIAA J. 1991 ; 29: 1692-1697 (Pubitemid 21710185)
16. Budiansky B. Micromechanics. Comput Struct. 1983 ; 16: 3-12
17. Argon AS. Fracture of composites. Treatise Mater Sci Technol. 1972 ; 1: 79-114
18. Budiansky B, Fleck NA. Compressive kinking of fiber composites: A topical review. Appl Mech Rev. 1994 ; 47: S246 - S250
19. Fleck NA, Deng L, Budiansky B. Prediction of kink width in compressed fibre composites. J Appl Mech. 1995 ; 62: 329-337
20. Kyriakides S, Arseculeratne R, Perry EJ, Liechti KM. On the compressive failure of fiber reinforced composites. Int J Solids Struct. 1995 ; 32: 689-738
21. Wisnom MR, Atkinson JW. Compressive failure due to shear instability: Experimental investigation of waviness and correlation with analysis. J Reinforced Plast Compos. 1996 ; 15: 420-439 (Pubitemid 126592675)
22. Narayanan S, Schadler LS. Mechanisms of kink-band formation in graphite/epoxy composites: a micromechanical study. Compos Sci Technol. 1999 ; 59: 2201-2213 (Pubitemid 30059559)
23. Vogler TJ, Hsu S-Y, Kyriakides S. Composite failure under combined compression and shear. Int J Solids Struct. 2000 ; 37: 1765-1791 (Pubitemid 32213089)
24. Yerramalli CS, Waas AM. A failure criterion for fiber reinforced polymer composites under combined compression-torsion loading. Int J Solids Struct. 2003 ; 40: 1139-1164 (Pubitemid 36242719)
25. Basu S, Waas A, Ambur D. Compressive failure of fiber composites under multi-axial loading. J Mech Phys Solids. 2006 ; 54: 611-634 (Pubitemid 43031543)
26. Pimenta S, Gutkin R, Pinho ST, Robinson P. A micromechanical model for kink-band formation: Part ii-analytical modelling. Compos Sci Technol. 2009 ; 69: 956-956
27. Pimenta S, Gutkin R, Pinho ST, Robinson P. A micromechanical model for kink-band formation: Part i-experimental study and numerical modelling. Compos Sci Technol. 2009 ; 69: 948-948
28. Gutkin R, Pinho ST, Robinson P, Curtis PT. On thetransition from shear-driven fibre compressive failureto fibre kinking in notched cfrp laminates under longitudinal compression. Compos Sci Technol. 2010 ; 70: 1223-1223
29. Gutkin R, Pinho ST, Robinson P, Curtis PT. Micro-mechanical modelling of shear-driven fibre compressive failure and of fibre kinking for failure envelope generation in cfrp laminates. Compos Sci Technol. 2010 ; 70: 1214-1214
30. Guimard J-M, Allix O, Pechnik N, Thévenet P. Statistical energy and failure analysis of CFRP compression behavior using a uniaxial microbuckling model. J Compos Mater. 2007 ; 41: 2807-2828 (Pubitemid 47631265)
31. Paluch B. Analysis of geometric imperfections in fibres for unidirectional fibrereinforced composites. La Recherche Aéronautique. 1994 ; 6: 431-448
32. Weaver CW, Williams JG. Deformation of a carbon-epoxy composite under hydrostatic pressure. J Mater Sci. 1975 ; 10: 1323-1333
33. Michaeli W, Mannigel M, Preller F. On the effect of shear stresses on the fibre failure behaviour in CFRP. Compos Sci Technol. 2009 ; 69: 1354-1354
34. Crisfield MA. A fast incremental / iterative solution procedure that handles "snap-through". Comput Struct. 1981 ; 13: 55-62 (Pubitemid 11504717)
35. Lafarie-Frenot M-C, Touchard F. Comparative in-plane shear behaviour of long-carbon-fibre composites with thermoset or thermoplastic matrix. Compos Sci Technol. 1994 ; 52: 417-425
36. Ladevèze P In: Mechanics and mechanisms of damage in composites and multi-materials. Saint-Itienne, France, 15-17 November. 1989: 119-141.
37. Ladevèze P. A damage computational method for composite structures. Comput Struct. 1992 ; 44: 79-87 (Pubitemid 23557063)
38. Ladevèze P, Allix O, Deü J-F, Léêque D. A mesomodel for localisation and damage computation in laminates. Comput Methods Appl Mech Eng. 2000 ; 183: 105-122 (Pubitemid 30567979)
39. Ladevèze P, Lubineau G. On a damage mesomodel for laminates micromeso relationships, possibilities and limits. Compos Sci Technol. 2001 ; 61: 2149-2158 (Pubitemid 33112383)
40. Ladevèze P, Lubineau G. An enhanced mesomodel for laminates based on micromechanics. Compos Sci Technol. 2002 ; 62: 533-541 (Pubitemid 34213088)
41. Lemaître J. Coupled elasto-plasticity and damage constitutive equations. Comput Methods Appl Mech Eng. 1985 ; 51: 31-49
42. Lemaître J, Chaboche J-L Mécanique des Matériaux Solides. 19932 nd edn. Dunod. Dunod: ; 1993 :
43. Le DantecE. Contribution à la modélisation du comportement mécanique des composites stratifiés. Ph.D. ThesisUniversité Paris, 6, 1989-6, 1989.
44. Eaton J. GNU Octave manual.. 2002 ;:
45. Vinçon, I , Allix O, Sigety P, Auvray MH. Compressive performance of carbon fibres: experiment and analysis. Compos Sci Technol. 1998 ; 58: 1649-1658 (Pubitemid 29007709)
46. Drapier S, Grandidier J-C, Potier-Ferry M. Towards a numerical model of the compressive strength for long fibre composites. Eur J Mech A. Solids. 1999 ; 18: 69-92
47. Budiansky B, Fleck NA, Amazigo JC. On kink-band propagation in fiber composites. J Mech Phys Solids. 1998 ; 46: 1637-1653 (Pubitemid 128420414)
48. Allix O, Ladevèze P, Vittecoq E. Modelling and identification of the mechanical behaviour of composite laminates in compression. Compos Sci Technol. 1994 ; 51: 35-42 (Pubitemid 1194309)
49. Yurgartis S. Measurement of small angle fiber misalignments in continuous fiber composites. Compos Sci Technol. 1987 ; 30: 279-293
50. Waas AM, Babcock CDJ, Knauss WG. A mechanical model for elastic fiber microbuckling. J Appl Mech. 1990 ; 57: 138-149 (Pubitemid 20670601)
51. Liu D, Fleck NA, Sutcliffe MPF. Compressive strength of fibre composites with random fibre waviness. J Mech Phys Solids. 2004 ; 52: 1481-1505
52. Ladevèze P, Lubineau G, Violeau D. A computational damage micromodel of laminated composites. Int J Fract. 2006 ; 137: 139-150 (Pubitemid 43362078)
53. Guidault PA, Allix O, Champaney L, Cornuault C. A multiscale extended finite element method for crack propagation. Computer Methods in Applied Mechanics and Engineering. 2008 ; 197 (5): 381-399 (Pubitemid 47629598)
54. Allix O, Blanchard L. Mesomodeling of delamination: toward industrial applications. Composites Science and Technology. 2006 ; 66 (6): 731-744 (Pubitemid 43329419)