Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties

Journal of Intelligent Manufacturing

Volumn 22, Issue 4, 2011, Pages 491-504

  Pal, Sukhomay ^a   Heyns, P Stephan ^a   Freyer, Burkhard H ^a   Theron, Nico J ^a   Pal, Surjya K ^b  

^a UNIVERSITY OF PRETORIA   (South Africa)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Genetic algorithm; Monitoring; Neural network; Optimization; Tool wear; Turning operations; Wavelet packet analysis

Indexed keywords

CUTTING CONDITIONS; CUTTING OPERATIONS; EFFECTIVE TOOL; INPUT DATAS; INPUT FEATURES; INPUT UNCERTAINTY; MONITORING INFORMATION; MOTOR CURRENTS; NOVEL STRATEGIES; ONLINE IMPLEMENTATION; OPTIMIZATION SYSTEM; PRODUCT QUALITY; PRODUCTION COST; SENSOR FUSION; TOOL HOLDERS; TOOL WEAR; TOOL WEAR MONITORING; TOOL-WEAR EFFECT; TURNING OPERATIONS; WAVELET PACKET; WAVELET PACKET ANALYSIS;

CUTTING TOOLS; GENETIC ALGORITHMS; MONITORING; NEURAL NETWORKS; OPTIMIZATION; PRINCIPAL COMPONENT ANALYSIS; TURNING;

WEAR OF MATERIALS;

EID: 80053406480     PISSN: 09565515     EISSN: 15728145     Source Type: Journal    
DOI: 10.1007/s10845-009-0310-x     Document Type: Article

References (29)

1. Audy, J. (2006). An appraisal of techniques and equipment for cutting force measurement. Journal of Zhejiang University Science A, 7, 1781-1789. (Pubitemid 44881939)
2. Ben-Haim, Y. (2001). Information-gap decision theory: Decisions under severe uncertainty. Academic Press.
3. Berger, B. S., Minis, I., Harley, J., Rokin, M., & Papadopoulos, M. (1998). Wavelet based cutting state identification. Journal of Sound and Vibration, 213(5), 813-827. (Pubitemid 128379382)
4. Byrne, G., Dornfeld, D., Inasaki, I., Ketteler, G., König, W., & Teti, R. (1995). Tool conditionmonitoring (TCM)-The status of research and industrial application. Annals of the CIRP, 44(2), 541-567.
5. Chao, P., & Hwang, Y. D. (1997). An improved neural network model for the prediction of cutting tool life. Journal of Intelligent Manufacturing, 8, 107-115. (Pubitemid 127507754)
6. Da, Z. J., Sadler, J. P., & Jawahir, I. S. (1997). Prediction of optimum cutting conditions for turning operations at varying tool-wear states. Transaction of NAMRI/SME, XXV, 75-80.
7. Deb, K. (1996). Optimization for engineering design. NewDelhi: Prentice Hall of India (p) Ltd.
8. Dornfeld, D. A. (1990). Neural network sensor fusion for tool condition monitoring. Annals of the CIRP, 39(1), 101-105.
9. Franco-Gasca, L. A., Herrera-Ruiz, G., Peniche-Vera, R., Romero- Troncoso, R. D. J., & Leal-Tafolla, W. (2006). Sensorless tool failure monitoring system for drilling machines. International Journal of Machine Tools and Manufacture, 46, 381-386. (Pubitemid 41827910)
10. Haykin, S. (2003). Neural Networks: A comprehensive foundation. Delhi: Pearson Education.
11. Heyns, P. S. (2007). Tool condition monitoring using vibration measurements- a review. Insight, 49(8), 447-450. (Pubitemid 47316423)
12. Jemielniak, K., Kwiatkowski, L., & Wrzosek, P. (1998). Diagnosis of tool wear based on cutting forces and acoustic emission measures as inputs to a neural network. Journal of Intelligent Manufacturing, 9, 447-455. (Pubitemid 128517790)
13. JolliHe, I. J. (1986). Principal Component Analysis. New York: Springer.
14. Keinert, F. (2004). Wavelets and multiwavelets. USA: Chapman and Hall/CRC.
15. Lee, J. M., Choi, D. K., Kim, J., & Chu, C. N. (1995). Real-time tool breakage monitoring for NC milling process. Annals of the CIRP, 44(1), 59-62.
16. Mannan, M. A., & Broms, S. (1989). Monitoring and adaptive control of cutting process by means of motor power and current measurements. Annals of the CIRP, 38(1), 347-350.
17. Mathworks Inc. (2007). User manual of wavelet toolbox. MATLAB 7.0.
18. Mittermayr, C. R., Nikolov, S. G., Hutter, H., & Grasserbauer, M. (1996). Wavelet denoising of Gaussian peaks: a comparative study. Chemometrics and Intelligent Laboratory Systems, 34, 187-202. (Pubitemid 26316301)
19. Obikawa, T., Kaseda, C., Matsumura, T., Gong, W. G., & Shirakashi, T. (1996). Tool wear monitoring for optimization cutting conditions. Journal of Material Processing Technology, 62, 374-379. (Pubitemid 126366038)
20. Pal, S., Pal, S. K., & Samantaray, A. K. (2007). Radial basis function neural network model based prediction of weld-plate distortion due to pulsed metal inert gas welding. Science and Technology of Welding and Joining, 12(8), 725-731.
21. Papadopoulos, G., & Edwards, P. J. (2001). Confidence estimation methods for neural networks: a practical comparison. IEEE Transactions on Neural Networks, 12(6), 1278-1287. (Pubitemid 33106033)
22. Purushothaman, S. (2009). Tool wear monitoring using artificial neural network based on extended Kalman filter weight updation with transformed input patterns. Journal of Intelligent Manufacturing. doi:10.1007/s10845-009-0249-y.
23. Rehorn, A. G., Jiang, J.,&Orban, P. E. (2005). State-of-the- artmethods and results in tool condition monitoring: a review. International Journal of Advanced Manufacturing Technology, 26, 693-710. (Pubitemid 41444225)
24. Scheffer, C., & Heyns, P. S. (2004). An industrial tool wear monitoring system for interrupted turning. Mechanical Systems and Signal Processing, 18, 1219-1242.
25. Sick, B. (2002). On-line and indirect tool wear monitoring in turning with artificial neural networks: a review of more than a decade of research. Mechanical Systems and Signal Processing, 16, 487-546.
26. Velayudham, A., Krishnamurthy, R., & Soundarapandian, T. (2005). Acoustic emission based drill condition monitoring during drilling of glass/phenolic polymeric composite using wavelet packet transform. Material Science and Engineering A, 412, 141-145. (Pubitemid 41762241)
27. Wang, X., & Jawahir, I. S. (2001). Optimization of multi-pass turning operations using genetic algorithms for the selection of cutting conditions and cutting tools with tool-wear effect. In IFSA world congress and 20th NAFIPS international conference (IEEE) (vol. 5, pp. 3093-3100). Canada: Vancouver, BC.
28. Wang, X., Wang, W., Huang, Y., Nguyen, N., & Krishnakumar, K. (2008). Design of neural network-based estimator for tool wear modelling in hard turning. Journal of Intelligent Manufacturing, 19, 383-396.
29. Wu, Y., & Du, R. (1996). Feature extraction and assessment using wavelet packets for monitoring of machining processes. Mechanical System and Signal Processing, 10, 29-53. (Pubitemid 126349205)