Unit process impact assessment for discrete part manufacturing: A state of the art

CIRP Journal of Manufacturing Science and Technology

Volumn 4, Issue 2, 2011, Pages 129-135

  Duflou, J R ^a   Kellens, K ^a   Dewulf, W ^b  

^a UNIVERSITY OF LEUVEN   (Belgium)

^b Department of Obstetrics and Gynaecology   (Belgium)

Author keywords

Discrete manufacturing; Energy efficiency; Impact assessment; Unit process

Indexed keywords

COMMON PROCESS; DISCRETE MANUFACTURING; ECOLOGICAL FOOTPRINT; ENVIRONMENTAL FOOTPRINTS; IMPACT ASSESSMENTS; MACHINE TOOL DESIGN; MANUFACTURING PROCESS; MANUFACTURING UNITS; PART MANUFACTURING; PROCESS EMISSIONS; RESEARCH INSTITUTES; STATE OF THE ART; UNIT PROCESS;

CARBON DIOXIDE; ENERGY EFFICIENCY; ENVIRONMENTAL IMPACT; INDUSTRIAL ENGINEERING; MANUFACTURE; PRODUCTION ENGINEERING;

ENVIRONMENTAL IMPACT ASSESSMENTS;

EID: 80053241605     PISSN: 17555817     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cirpj.2011.01.008     Document Type: Article

References (49)

1. CO2PE! - Initiative (Cooperative Effort on Process Emissions in Manufacturing), http://www.mech.kuleuven.be/co2pe.
2. ISO 14001 Environmental Management Systems-Requirements with Guidance for Use 2004, International Organization for Standardization.
3. Gutowski T., Murphy C., Allen D., Bauer D., Bras B., Piwonka T., Sheng P., Sutherland J., Thurston D., Wolff E. Environmentally Benign Manufacturing: Observations From Japan, Europe and the United States. Journal of Cleaner Production 2005, 13:1-17.
4. ISO 14040 Environmental Management - Life Cycle Assessment - Principles and Framework 2006, International Organization for Standardization.
5. ISO 14044 Environmental Management - Life Cycle Assessment - Requirements and Guidelines 2006, International Organization for Standardization.
6. ILCD - Handbook, European Commission-Joint Research Centre Life Cycle Thinking and Assessment, Institute for Environment and Sustainability, http://lct.jrc.ec.europa.eu/publications.
7. Suh S. Miet 3.0 User Guide, An Inventory Estimation Tool for Missing Flows Using Input-Output Techniques 2003, Leiden University, CML.
8. Weidema B., Nielsen A.M., Christiansen K., Norris G., Notten P., Suh S., Madsen J. Priorisation within the Integrated Product Policy 2005, 2.-0 LCA Consultants.
9. Goedkoop M. SimaPro Database Manual Dutch Input Output Database 2004, vol. 95. PRé Consultants.
10. Environmental Technology Laboratory LCA Database Based on 2000 Input-Output Tables for Japan 2006, Corporate Research & Development Center, Toshiba Corporation.
11. Global steel life cycle inventory (LCI) The World Steel Association (Worldsteel) 2010, http://www.worldsteel.org.
12. European Aluminium Association Environmental Profile Report for the European Aluminium Industry, Life Cycle Inventory Data for Aluminium Production and Transformation Processes in Europe 2008, http://www.eaa.net/en/environment-health-safety/lca.
13. Eco profiles: Life-cycle Analysis, PlasticsEurope, Association of plastics Manufacturers, http://www.plasticseurope.org/.
14. BUWAL database, Bundesamt für Umwelt, Wald und Landschaft, http://www.bafu.admin.ch/.
15. Ecoinvent Centre, Swiss Centre for Life Cycle Inventories, http://www.ecoinvent.org/.
16. Steiner R., Frischknecht R. Metals Processing and Compressed Air Supply, Ecoinvent report nr. 23 2007.
17. ELCD database, European Commission-Joint Research Centre, LCA-Tools, Services and Data, http://lca.jrc.ec.europa.eu/lcainfohub/datasetCategories.vm.
18. The Life Cycle Initiative, United Nations Environmental Programme (UNEP) and the Society for Environmental Toxicology and Chemistry (SETAC), http://www.estis.net/sites/lcinit.
19. Wenzel H., Hauschild M., Alting L. Environmental Assessment of Products, vol. 1: Methodology, Tools and Case Studies in Product Development 1998, Kluwer, Hingham, MA, USA, p. 560.
20. LIME, Life Cycle Impact Assessment Method Based on Endpoint Modeling, AIST, http://www.aist-riss.jp/main/modules/groups_alca/content0005.html.
21. Jolliet O., Margni M., Charles R., Humbert S., Payet J., Rebitzer G., Rosenbaum R.K. IMPACT 2002+: A New Life Cycle Impact Assessment Methodology. International Journal of Life Cycle Assessment 2003, 8(6):324-330.
22. Huijbregts M.A.J., Thissen U., Guinée J.B., Jager T., Kalf D., van de Meent D., Ragas A.M.J., Wegener Sleeswijk A., Reijnders L. Priority Assessment of Toxic Substances in Life Cycle Assessment. Part I. Calculation of Toxicity Potentials for 181 Substances with the Nested Multi-media Fate, Exposure and Effects Model USES-LCA. Chemosphere 2000, 41(4):541-573.
23. Goedkoop M., Müller-Wenk R., Hofstetter P., Spriensma R. The Eco-Indicator 99 explained. International Journal of Life Cycle Assessment 1998, 3(6):352-360.
24. McKone T., Bennett D., Maddalena R. CalTOX 4.0 Technical Support Document 2001, vol. 1. LBNL-47254, Lawrence Berkeley National Laboratory, Berkeley, CA.
25. MacLeod M., Woodfine D.G., Mackay D., McKone T.E., Bennett D.H., Maddalena R. BETR North America: A Regionally Segmented Multimedia Contaminant Fate Model for North America. Environmental Science and Pollution Research 2001, 8(3):156-163.
26. Bachmann T.M. Hazardous Substances and Human Health: Exposure, Impact and External Cost Assessment at the European Scale. Trace Metals and Other Contaminants in the Environment 2006, vol. 8. Elsevier, Amsterdam, p. 570.
27. Goedkoop, M., Heijungs, R., Huijbregts, M., De Schryver, A., Struijs, J., van Zelm, R., ReCiPe 2008-A Life Cycle Impact Assessment Method which Comprises Harmonized Category Indicators at the Midpoint and the Endpoint Level, http://www.lcia-recipe.net/.
28. Rosenbaum R., Bachmann T.M., Gold L.S., Huijbregts M.A.J., Jolliet O., Juraske R., Koehler A., Larsen H.F., MacLeod M., Margni M., McKone T.E., Payet J., Schuhmacher M., van de Meent D., Hauschild M.Z. USEtox-The UNEP-SETAC Toxicity Model: Recommended Characterization Factors for Human Toxicity and Freshwater Ecotoxicity in Life Cycle Impact Assessment. International Journal of Life Cycle Assessment 2008, 13:532-546.
29. GaBi Software, Product Sustainability, PE International, http://www.gabi-software.com/.
30. SimaPro LCA Software, Pré Consultants, http://www.pre.nl/simapro.
31. Umberto-The Software for Process Optimization, http://www.umberto.de/.
32. Cluster of Excellence-Energy-efficient Product and Process Innovation in Production Technologies, Chemnitz University of Technology, http://www.eniprod.tu-chemnitz.de/index.php.en.
33. Lind S., Johansson B., Stahre S., Berlin C., Fasth Å., Heilala J., Helin K., Kiviranta S., Krassi B., Montonen J., Tonteri H., Vatanen S., Viitaniemi J. SIMTER. A Joint Simulation Tool for Production Development. VTT Working Paper 125 2009, 49 p., Espoo.
34. Centre for Sustainable Manufacturing and Reuse/Recycling Technologies, http://www.centreforsmart.co.uk/.
35. Solid Works Sustainability, http://www.solidworks.com/sustainability.
36. EPA The Lean and Environment Toolkit 2007, U.S. Environmental Protection Agency, http://www.epa.gov/lean/toolkit/index.htm.
37. EPA The Lean and Energy Toolkit 2007, U.S. Environmental Protection Agency, http://www.epa.gov/lean/toolkit/LeanEnergyToolkit.pdf.
38. Cash R., Wilkerson T. GreenSCOR, Developing a Green Supply Chain Analytical Tool 2003.
39. Rahimifard S. Minimisation of Energy Consumption during the Manufacturing Phase of a Product Life Cycle 2009, Manufacture 2009, Goteborg, Sweden.
40. Rahimifard S., Seow Y., Childs T. Minimising Embodied Product Energy to Support Energy Efficient Manufacturing. CIRP Annals - Manufacturing Technology 2010, 59(1):25-28.
41. European Commission Energy-Yearly Statistics 2007 2009, Office for Official Publications of the European Communities, Luxembourg, ISBN 978-92-79r-r12787-8.
42. Gutowski T., Dahmus J., Thiriez A. Electrical Energy Requirements for Manufacturing Processes. Proceedings of the 13th CIRP International Conference on Life Cycle Engineering 2006, 623-628.
43. Dahmus J., Gutowski T. An Environmental Analysis of Machining. Proceedings of IMECE 2004, ASME International Mechanical Engineering Congress and R&D Expo 2004.
44. CIRP Collaborative Working Group (Energy and Resource Efficiency & Effectiveness): http://www.cirp-eree.iwf.tu-bs.de/.
45. Intelligent Manufacturing System (IMS), Manufacturing Technology Platform (MTP) Theme: http://www.ims.org/content/co2pe-ims-mtp-initiative-2008.
46. DIN 8580 Manufacturing Processes - Terms and Definitions, Division September 2003, Deutsches Institüt für Normung e.V.
47. Duflou J.R., Kellens K., Devoldere T., Deprez W., Dewulf W. Energy Related Environmental Impact Reduction Opportunities in Machine Design: Case Study of a Laser Cutting Machine. International Journal of Sustainable Manufacturing 2010, 2(1):80-98.
48. Laser Safety database, Laser Zentrum Hannover e.V., http://www.laser-zentrum-hannover.de/.
49. Kellens K., Dewulf W., Deprez W., Yasa E., Duflou J.R. Environmental Analysis of SLM and SLS Manufacturing Processes. Proceedings of the 17th CIRP Int. Conference on Life Cycle Engineering 2010, 423-428.