-
1
-
-
52349094179
-
From single production step to entire process chain - The global approach of Distortion Engineering
-
14.-16.09.05, Bremen, H.-W. Zoch, Th. Lübben (Hrsg.)
-
Zoch, H.-W.: From single production step to entire process chain - the global approach of Distortion Engineering. Proc. IDE 2005, 14.-16.09.05, Bremen, H.-W. Zoch, Th. Lübben (Hrsg.), 2005, S. 3-10
-
(2005)
Proc. IDE 2005
, pp. 3-10
-
-
Zoch, H.-W.1
-
2
-
-
0029716477
-
Utilization of grinding heat as a new heat treatment process
-
Brinksmeier, E.; Brockhoff, T.: Utilization of Grinding Heat as a New Heat Treatment Process.Annals of the CIRP 45 (1996) 1, S. 283-286 (Pubitemid 126601450)
-
(1996)
CIRP Annals - Manufacturing Technology
, vol.45
, Issue.1
, pp. 283-286
-
-
Brinksmeier, E.1
Brockhoff, T.2
-
3
-
-
34547270663
-
Investigations on surface layer impact and grinding wheel performance for industrial grind-hardening applications
-
Brinksmeier, E.; Minke, E.; Wilke, T.: Investigations on Surface Layer Impact and GrindingWheel Performance for Industrial Grind-Hardening Applications.Annals of the WGP, Production Engineering 12 (2005) 1, S. 35-40
-
(2005)
Annals of the WGP, Production Engineering
, vol.12
, Issue.1
, pp. 35-40
-
-
Brinksmeier, E.1
Minke, E.2
Wilke, T.3
-
4
-
-
84901749770
-
Werkstückrandzonenausbildung in der schleifenden Bearbeitung.
-
W. Wicharz F. Klocke E. Brinksmeier (Hrsg.) Selbstverlag Bremen
-
Heinzel, C.; Minke, E.: Werkstückrandzonenausbildung in der schleifenden Bearbeitung. In: Schleiftechnik im Wettbewerb - Stand der Technik und Zukunftschancen des Fertigungsverfahrens. W. Wicharz, F. Klocke, E. Brinksmeier (Hrsg.), Selbstverlag, Bremen, 2000, S. 15-1 - 15-21
-
(2000)
Schleiftechnik im Wettbewerb - Stand der Technik und Zukunftschancen des Fertigungsverfahrens
, pp. 151-1521
-
-
Heinzel, C.1
Minke, E.2
-
6
-
-
0019581510
-
Metastable structures in metallurgy
-
Turnbull, D.: Metastable Structures in Metallurgy. Metall. Trans. 12 (1981) 5, S. 695-708
-
(1981)
Metall. Trans.
, vol.12
, Issue.5
, pp. 695-708
-
-
Turnbull, D.1
-
7
-
-
79955898463
-
Metastable phases and phase diagrams
-
Baricco, M.; Palumbo, M.; Baldissin, D.; Bosco, E.; Battezzati, L.: Metastable phases and phase diagrams. Metall. Fisica 11-12 (2004), S. 1-7
-
(2004)
Metall. Fisica
, vol.11-12
, pp. 1-7
-
-
Baricco, M.1
Palumbo, M.2
Baldissin, D.3
Bosco, E.4
Battezzati, L.5
-
8
-
-
0000495649
-
Formation of martensite in austenitic stainless steels
-
Angel, T.: Formation of martensite in austenitic stainless steels. JISI 177 (1954), S. 165-174
-
(1954)
JISI
, vol.177
, pp. 165-174
-
-
Angel, T.1
-
9
-
-
49649130773
-
A mechanism for the strain-induced nucleation of martensitic transformation
-
Olson, G.-B.; Cohen, M.: A mechanism for the strain-induced nucleation of martensitic transformation. J. Less-Common Metals 28 (1972), S. 107-118
-
(1972)
J. Less-Common Metals
, vol.28
, pp. 107-118
-
-
Olson, G.-B.1
Cohen, M.2
-
10
-
-
49349123182
-
The effects of strain rate grain size and temperature on the yield stress of a metastable austenite
-
Guimaraes, J. R. C.; Werneck, V. P.: The effects of strain rate grain size and temperature on the yield stress of a metastable austenite. Mater. Sci. Eng. 34 (1978) 1, S. 87-90
-
(1978)
Mater. Sci. Eng.
, vol.34
, Issue.1
, pp. 87-90
-
-
Guimaraes, J.R.C.1
Werneck, V.P.2
-
11
-
-
0017484101
-
Composition and grain size dependencies of straininduced martensitic transformation in metastable austenitic stainless steel
-
Nohara, K.; Ono, Y.;Ohashi, N.: Composition and grain size dependencies of straininduced martensitic transformation in metastable austenitic stainless steel. JISI Japan 63 (1977), S. 772-782
-
(1977)
JISI Japan
, vol.63
, pp. 772-782
-
-
Nohara, K.1
Ono, Y.2
Ohashi, N.3
-
12
-
-
0017611065
-
Struktur und mechanische Eigenschaften von Martensit.
-
Vöhringer, O.; Macherauch, E.: Struktur und mechanische Eigenschaften von Martensit. HTM Härterei-Techn. Mitt. 32 (1977), S. 153-166
-
(1977)
HTM Härterei-Techn. Mitt.
, vol.32
, pp. 153-166
-
-
Vöhringer, O.1
MacHerauch, E.2
-
13
-
-
0020126560
-
Deformation-induced martensitic transformation and transformation induced plasticity in steels
-
Tamura, I.: Deformation-induced martensitic transformation and transformation induced plasticity in steels. Metal. Sci. 16 (1982), S. 245-253 (Pubitemid 12521872)
-
(1982)
Metal science
, vol.16
, Issue.5
, pp. 245-253
-
-
Tamura, I.1
-
15
-
-
37549072171
-
The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel
-
Dan, W. J.; Li, S. H.; Zhang,W. G.; Lin, Z. Q.: The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel. Mater. Design 29 (2008), S. 604-612
-
(2008)
Mater. Design
, vol.29
, pp. 604-612
-
-
Dan, W.J.1
Li, S.H.2
Zhangw, G.3
Lin, Z.Q.4
-
16
-
-
0033740503
-
Computational simulation of the dependence of the austenitic grain size on the deformation behavior of TRIP steels
-
Iwamoto, T.; Toshio, T.: Computational simulation of the dependence of the austenitic grain size on the deformation behavior of TRIP steels. Int. J. Plasticity 16 (2000), S. 791-804
-
(2000)
Int. J. Plasticity
, vol.16
, pp. 791-804
-
-
Iwamoto, T.1
Toshio, T.2
-
17
-
-
68949184871
-
The influence of depth of cut on the machinability of an alloyed austempered ductile iron
-
Avishan, B.; Yazdani, S.; Jalali Vahid, D.: The influence of depth of cut on the machinability of an alloyed austempered ductile iron. Mater. Sci. Eng. A 523 (2009), S. 93-98
-
(2009)
Mater. Sci. Eng. A
, vol.523
, pp. 93-98
-
-
Avishan, B.1
Yazdani, S.2
Jalali Vahid, D.3
-
18
-
-
0037084056
-
Stress-induced martensitic transformation in Cu-Al-Zn-Mn polycrystal investigated by two in-situ neutron diffraction techniques
-
DOI 10.1016/S0921-5093(01)01316-8, PII S0921509301013168
-
Sittner, P.; Lukas, P.; Neov, D.; Daymond, M. R.; Novak, K.; Swallowe, G. M.: Stressinduced martensitic transformation in Cu-Al-Zn-Mn polycrystal investigated by two in-situ neutron diffraction techniques. Mater. Sci. Eng. A 324 (2002), S. 225-234 (Pubitemid 34170222)
-
(2002)
Materials Science and Engineering A
, vol.324
, Issue.1-2
, pp. 225-234
-
-
Sittner, P.1
Lukas, P.2
Neov, D.3
Daymond, M.R.4
Novak, V.5
Swallowe, G.M.6
-
19
-
-
33645988841
-
Stress-induced martensitic transformations and shape memory at nanometer scales
-
Frick, C. P.; Lang, T. W.; Spark, K.; Gall, K.: Stress-induced martensitic transformations and shape memory at nanometer scales. Acta Mater. 54 (2006) 8, S. 2223-2234
-
(2006)
Acta Mater.
, vol.54
, Issue.8
, pp. 2223-2234
-
-
Frick, C.P.1
Lang, T.W.2
Spark, K.3
Gall, K.4
-
20
-
-
58149512877
-
Deformationinduced martensitic transformation in Cu-Zr-(Al,Ti) bulk metallic glass composites
-
Pauly, S.; Das, J.; Bednarcik, J.; Mattern, N.; Kim, K. B.; Eckert, J.: Deformationinduced martensitic transformation in Cu-Zr-(Al,Ti) bulk metallic glass composites. Scripta Mater. 60 (2009) 6, S. 431-434
-
(2009)
Scripta Mater.
, vol.60
, Issue.6
, pp. 431-434
-
-
Pauly, S.1
Das, J.2
Bednarcik, J.3
Mattern, N.4
Kim, K.B.5
Eckert, J.6
-
21
-
-
51649118059
-
Effects of deformation and Mo, Nb, V, Ti on continuous cooling transformation in Cu-P-Cr-Ni-Mo weathering steels
-
Zhang, C.; Cai, D.; Wang, Y.; Liu, M.; Liao, B.; Fan, Y.: Effects of deformation and Mo, Nb, V, Ti on continuous cooling transformation in Cu-P-Cr-Ni-Mo weathering steels.Mater. Charact. 59 (2008), S. 1638-1642
-
(2008)
Mater. Charact.
, Issue.59
, pp. 1638-1642
-
-
Zhang, C.1
Cai, D.2
Wang, Y.3
Liu, M.4
Liao, B.5
Fan, Y.6
-
22
-
-
0000622264
-
Influence of strain-induced martensitic transformation on the low-cycle fatigue behavior of a stainless steel
-
Baudry, G.; Pineau, A.: Influence of strain-induced martensitic transformation on the low-cycle fatigue behavior of a stainless steel. Mater. Sci. Eng. 28 (1977) 2, S. 229-242
-
(1977)
Mater. Sci. Eng.
, vol.28
, Issue.2
, pp. 229-242
-
-
Baudry, G.1
Pineau, A.2
-
23
-
-
0024701452
-
Plasticity-induced martensitic transformation during cyclic deformation of AISI 304L stainless steel
-
Bayerlein, M.; Christ, H. J.; Mughrabi, H.: Plasticity-induced martensitic transformation during cyclic deformation of AISI 304L stainless steel. Mater. Sci. Eng. A 114 (1989), S. L11-L16
-
(1989)
Mater. Sci. Eng. A
, vol.114
-
-
Bayerlein, M.1
Christ, H.J.2
Mughrabi, H.3
-
24
-
-
0031374754
-
A study of friction-induced martensitic transformation for austenitic manganese steel
-
Zhang, F.; Lei, T.: A study of friction-induced martensitic transformation for austenitic manganese steel.Wear 212 (1997) 2, S. 195-198
-
(1997)
Wear
, vol.212
, Issue.2
, pp. 195-198
-
-
Zhang, F.1
Lei, T.2
-
25
-
-
84862550349
-
Delayed Cracking in 301 austenitic steel after bending process: Martensitic Transformation and Hydrogen Embrittlement analysis
-
eingereicht/akzeptiert, online abrufbar seit 29. Nov.
-
Zinbi, A.; Bouchou, A.: Delayed Cracking in 301 austenitic steel after bending process: Martensitic Transformation and Hydrogen Embrittlement analysis. Engin. Failure Anal. eingereicht/akzeptiert, online abrufbar seit 29. Nov. 2009
-
(2009)
Engin. Failure Anal.
-
-
Zinbi, A.1
Bouchou, A.2
-
26
-
-
33751183061
-
Stepwise transformation behavior of the strain-induced martensitic transformation in a metastable stainless steel
-
DOI 10.1016/j.scriptamat.2006.10.009, PII S135964620600741X
-
Hedström, P.; Lienert, U.; Almer, J.; Odén, M.: Stepwise transformation behavior of the strain-induced martensitic transformation in a metastable stainless steel. Scripta Mater. 56 (2007) 3, S. 213-216 (Pubitemid 44779394)
-
(2007)
Scripta Materialia
, vol.56
, Issue.3
, pp. 213-216
-
-
Hedstrom, P.1
Lienert, U.2
Almer, J.3
Oden, M.4
-
27
-
-
51649083734
-
Correlation between processing parameters and strain-induced martensitic transformation in cold worked AISI 301 stainless steel
-
Mirzadeh, H.; Najafizadeh, A.: Correlation between processing parameters and strain-induced martensitic transformation in cold worked AISI 301 stainless steel. Mater. Charact. 59 (2008) 11, S. 1650-1654
-
(2008)
Mater. Charact.
, vol.59
, Issue.11
, pp. 1650-1654
-
-
Mirzadeh, H.1
Najafizadeh, A.2
-
28
-
-
2342434570
-
Steigerung der Härte nichtrostender martensitischer Stähle.
-
Berns,H.; Karlsohn,M.; Schmalt, F.; Trojahn, W.: Steigerung der Härte nichtrostender martensitischer Stähle. HTM Z. Werkst. Waermebeh. Fertigung 59 (2004), S. 87-97
-
(2004)
HTM Z. Werkst. Waermebeh. Fertigung
, vol.59
, pp. 87-97
-
-
Berns, H.1
Karlsohn, M.2
Schmalt, F.3
Trojahn, W.4
-
29
-
-
0022038460
-
Einfluss der Wärmebehandlung auf Restaustenitgehalt, Verschleißwiderstand und mechanische Eigenschaften ledeburitischer Chromstähle
-
Berns, H.; Trojahn, W.: Einfluss der Wärmebehandlung auf Restaustenitgehalt, Verschleißwiderstand und mechanische Eigenschaften ledeburitischer Chromstähle. HTM Härterei-Techn. Mitt. 40 (1985), S. 65-70 (Pubitemid 15563858)
-
(1985)
Haerterei-Technische Mitteilungen
, vol.40
, Issue.2
, pp. 65-70
-
-
Berns Hans1
Trojahn Werner2
-
30
-
-
0016359543
-
Restaustenit in ledeburitischen Chromstählen und seine Umwandlung durch Kaltumformung Tiefkühlung und Anlassen.
-
Berns, H.: Restaustenit in ledeburitischen Chromstählen und seine Umwandlung durch Kaltumformung, Tiefkühlung und Anlassen. HTM Härterei-Techn. Mitt. 29 (1974), S. 236-247
-
(1974)
HTM Härterei-Techn. Mitt.
, vol.29
, pp. 236-247
-
-
Berns, H.1
-
31
-
-
55349097147
-
Nichtmagnetisierbarer warmbeständiger nichtrostender Stahl für Wälzlager.
-
Riedner, S.; Berns, H.; Tyshchenko,A. I.; Gavriljuk, V. G.; Schulte-Noelle, C.; Trojahn, W.: Nichtmagnetisierbarer warmbeständiger nichtrostender Stahl für Wälzlager. Mat.-wiss. u.Werkstofftech. 39 (2008) 7, S. 448-454
-
(2008)
Mat.-wiss. U.Werkstofftech.
, vol.39
, Issue.7
, pp. 448-454
-
-
Riedner, S.1
Berns, H.2
Tyshchenkoa, I.3
Gavriljuk, V.G.4
Schulte-Noelle, C.5
Trojahn, W.6
-
35
-
-
84862535075
-
Festwalzen von Fan-und Verdichterschaufeln.
-
Klocke, F.; Zeppenfeld, C.; Bäcker, V., Feldhaus, B.: Festwalzen von Fan-und Verdichterschaufeln. Werkstattstechnik online 98 (2008) 6, S. 476-480
-
(2008)
Werkstattstechnik Online
, vol.98
, Issue.6
, pp. 476-480
-
-
Klocke, F.1
Zeppenfeld, C.2
Bäcker, V.3
Feldhaus, B.4
-
36
-
-
0346188419
-
-
8. Aufl., Springer Verlag, Berlin
-
Klocke, F.; König, W.: Fertigungsverfahren 1: Drehen, Fräsen, Bohren. 8. Aufl., Springer Verlag, Berlin, 2008
-
(2008)
Fertigungsverfahren 1: Drehen, Fräsen, Bohren.
-
-
Klocke, F.1
König, W.2
|