Determination of the Boltzmann constant by dielectric-constant gas thermometry

Metrologia

Volumn 48, Issue 5, 2011, Pages 382-390

  Fellmuth, Bernd ^a   Fischer, Joachim ^a   Gaiser, Christof ^a   Jusko, Otto ^a   Priruenrom, Tasanee ^b   Sabuga, Wladimir ^a   Zandt, Thorsten ^a  

^a PHYSIKALISCH TECHNISCHE BUNDESANSTALT   (Germany)

^b National Institute of Metrology   (Thailand)

Author keywords

[No Author keywords available]

Indexed keywords

BOLTZMANN CONSTANTS; CAPACITANCE BRIDGE; CYLINDRICAL CAPACITORS; EFFECTIVE AREA; EXPERIMENTAL SETUP; HELIUM GAS; HIGH-PURITY; INTERNATIONAL PROJECTS; LOW TEMPERATURES; MEASURING SYSTEMS; MONTE CARLO SIMULATION; PARTS PER MILLIONS; PISTON-CYLINDER ASSEMBLY; PRESSURE BALANCE; PRESSURE RANGES; STANDARD UNCERTAINTY; TRIPLE POINT OF WATERS; UNCERTAINTY BUDGET; VIRIAL EXPANSION;

CAPACITANCE; CAPACITORS; COMPUTER SIMULATION; HELIUM; ISOTHERMS; MONTE CARLO METHODS; STAINLESS STEEL; TEMPERATURE MEASUREMENT; THERMOMETERS; UNCERTAINTY ANALYSIS;

GASES;

EID: 80053186342     PISSN: 00261394     EISSN: 16817575     Source Type: Journal    
DOI: 10.1088/0026-1394/48/5/020     Document Type: Article

References (50)

1. BIPM 2005 Recommendation T 2 to the CIPM: new determinations of thermodynamic temperature and the Boltzmann constant Working Documents of the 23rd Meeting of the Consultative Committee for Thermometry (Sèvres) (BIPM, Document CCT/05-31, 2005)
2. Gugan D and Michel G W 1980 Metrologia 16 149
3. Luther H et al 1996 Metrologia 33 341-52
4. Moldover M R et al 1988 Phys. Rev. Lett. 60 249-52
5. Pitre L et al 2011 Int. J. Thermophys. online, doi:10.1007/s10765-011- 1023-x
6. Benz S P et al 2011 Metrologia 48 142-53
7. Lemarchand C et al 2010 Int. J. Thermophys. 31 1347-59
8. Castrillo A et al 2009 C. R. Physique 10 894-906
9. Fellmuth B et al 2006 Meas. Sci. Technol. 17 R145-59
10. Fellmuth B et al 2009 C. R. Physique 10 828-34
11. Gaiser C and Fellmuth B 2009 Metrologia 46 525-33
12. Gaiser C et al 2010 Int. J. Thermophys. 31 1428-37
13. Gaiser C and Fellmuth B 2010 Europhys. Lett. 90 63002
14. Łach G et al 2004 Phys. Rev. Lett. 92 233001
15. Puchalski M et al 2011 Phys. Rev. A 83 042508
16. Zandt T et al 2010 Int. J. Thermophys. 31 1371-85
17. Merlone A et al 2010 Int. J. Thermophys. 31 1386-95
18. Zandt T et al 2011 Int. J. Thermophys. 32 1355-65
19. Fellmuth B et al 2011 IEEE Trans. Instrum. Meas. 60 2522-6
20. Ishikawa Y and Nemani V 2003 Vacuum 69 501
21. BIPM, IEC, IFCC, ISO, IUPAC, IUPAP and OIML 1995 Guide to the Expression of Uncertainty in Measurement (Geneva, Switzerland: International Organization for Standardization) ISO/IEC Guide 98:1995, ISBN 92-67-10188-9
22. Sabuga W 2007 MAPAN - J. Metrol. Soc. India 22 3-11
23. Sabuga W 2011 Pressure measurements in gas media up to 7.5 MPa for the Boltzmann constant redetermination PTB-Mitteilungen submitted
24. -6 uncertainty for the Boltzmann constant project PTB-Mitteilungen submitted
25. OIML 2004 OIML R 111-1, Weights of Classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3: I. Metrological and Technical Requirements (Paris: OIML)
26. Jusko O et al 2008 Dimensional calibration techniques for pressure for pressure balances to be used in the new determination of the Boltzmann constant CIMMEC 1st Int. Congress on Mechanical Metrology (Rio de Janeiro)
27. Jusko O et al 2009 Proc. ASPE Spring Topical Meeting on Mechanical Metrology and Measurement Uncertainty (Albuquerque, NM) pp 11-14, ISBN 978-1-887706-49-0
28. Jusko O et al 2010 Key Eng. Mater. 437 150
29. Sabuga W and Priruenrom T 2007 IMEKO 20th TC3, 3rd TC16 and 1st TC22 Int. Conf. on Cultivating Metrological Knowledge (27-30 November 2007, Mérida, Mexico)
30. Sabuga W and Priruenrom T 2010 Two-dimensional flow model for calculation of the effective area of axially non-symmetric piston-cylinder units 5th APMP Pressure and Vacuum Symp. (Thailand)
31. Sabuga W et al 2011 Determination of the effective area of piston-cylinder assemblies using a rarefied gas flow model PTB-Mitteilungen submitted
32. Salama et al 2011 Measurement of the elastic constants of pressure balance materials using the resonant ultrasound spectroscopy PTB-Mitteilungen submitted
33. Sabuga W et al FEA calculation of pressure distortion coefficients of gas-operated pressure balances - EURAMET Project 1039 PTB-Mitteilungen submitted
34. Maynard J D 1992 J. Acoust. Soc. Am. 91 1754-62
35. Migliori A et al 1993 Physica B 183 1-24
36. Lasdon L S and Waren A D 1981 ACM SIGMAP Bull. 30 10-11
37. Nelder J A and Mead R 1965 Comput. J. 7 308-13
38. Grüneisen E 1908 Ann. Phys., Lpz. 26 394-402
39. Mehl J B 2009 C. R. Physique 10 859-65
40. Bich E et al 2007 Mol. Phys. 105 3035-49
41. Garberoglio G and Harvey A H 2009 J. Res. Natl Inst. Stand. Technol. 114 249-62
42. Gaiser C 2008 Properties of Helium and Gas Thermometry (Aachen: Shaker) ISBN 978-3-8322-7552-5
43. Gaiser C et al 2008 Int. J. Thermophys. 29 18-30
44. Gaiser C and Fellmuth B 2011 Being prepared for Metrologia
45. Preston-Thomas H 1990 Metrologia 27 3-10
46. Preston-Thomas H 1990 Metrologia 27 107
47. Fischer et al 2011 Int. J. Thermophys. 32 12-25
48. Fellmuth B et al 2011 Being prepared for Metrologia
49. Mohr P J et al 2008 Rev. Mod. Phys. 80 633-730
50. Schmidt J W 2007 Phys. Rev. Lett. 98 254504