Polyamide 11/poly(hydroxy amino ether) blends: Influence of the blend composition and morphology on the barrier and mechanical properties

European Polymer Journal

Volumn 47, Issue 10, 2011, Pages 1994-2002

  Lafitte, Géraldine ^a,b   Espuche, Eliane ^a   Gérard, Jean Franois ^b  

^a UNIVERSITÉ LYON 1   (France)

^b UNIVERSITÉ DE LYON   (France)

Author keywords

Gas barrier properties; Miscibility; Morphology; Polymer blends; Viscoelastic properties

Indexed keywords

HYDROGEN; MECHANICAL PROPERTIES; MORPHOLOGY; POLYMER BLENDS; SOLUBILITY; VISCOELASTICITY;

BLEND COMPOSITION; COMPOSITION RANGES; GAS BARRIER PROPERTIES; HYDROGEN PERMEABILITY; PROCESSING CONDITION; SPECIFIC PROPERTIES; TWO PHASE MORPHOLOGY; VISCOELASTIC PROPERTIES;

GAS PERMEABLE MEMBRANES;

EID: 80052931360     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2011.07.018     Document Type: Article

References (38)

1. Y.A. Elabd, and M.A. Hickner Block copolymers for fuel cells Macromolecules 44 1 2011 4054 4062
2. J.A. Mader, and B.C. Benicewicz Sulfonated polybenzimidazoles for high temperature PEM fuel cells Macromolecules 43 16 2010 6706 6715
3. T. Shimura, K. Miyatake, and M. Watanabe Poly(arylene ether) ionomers containing sulfofluorenyl groups: effect of electron with-drawing groups on the properties Eur Polym J 44 12 2008 4054 4062
4. S. Castagnet, J.C. Grandidier, M. Comyn, and G. Benoît Hydrogen influence on the tensile properties of mono and multi-layer polymers for gas distribution Int J Hydrogen Energy 35 2010 7633 7640
5. P. Martinez, L. Dawidowski, D. Gomez, and D. Pasquevich Life cycle greenhouse emissions of compressed natural gas-hydrogen mixtures for transportation in Argentina Int J Hydrogen Energy 35 11 2010 5793 5798
6. J.W. Chow, and D.R. Paul Nylon 6 nanocomposites by melt compounding Polymer 2001 1083 1094 (Pubitemid 33717615)
7. R.K. Bharadwaj Modeling the barrier properties of polymer-layered silicate nanocomposite Macromolecules 236 2004 29 37
8. E. Picard, A. Vermogen, J.F. Gérard, and E. Espuche Barrier properties of nylon 6-montmorillonite nanocomposite membranes prepared by melt blending: influence of the clay content and dispersion state. Consequences on modelling J Membr Sci 292 2007 133 144 (Pubitemid 46402899)
9. B. Alexandre, L. Colasse, D. Langevin, T. Médéric, T. Aubry, and C. Chappey Transport mechanisms of small molecules through polyamide 12/montmorillonite nanocomposites J Phys Chem B 114 2010 8827 8837
10. E. Naveau, Z. Dominkovics, C. Detrembleur, C. Jerome, J. Hari, and K. Renner Effect of clay modification on the structure and mechanical properties of polyamide-6 nanocomposites Eur Polym J 47 1 2011 5 15
11. M. Paci, S. Filippi, and P. Magagnini Nanostructure development in nylon 6-cloisite® 30B composites. Effects of the preparation conditions Eur Polym J 46 5 2010 838 853
12. C.A. Correa, C.L. Carvalho, A.L. Bezzan, C.A. Razzino, and E. Hage Structure property relationships in PA6 and PP copolymers blended by single and twin screw extrusion Int Polym Process 21 5 2006 440 448 (Pubitemid 44747402)
13. N. Dencheva, T. Nunes, A.J. Oliveira, and Z. Denchev Microfibrillar composites based on polyamide/polyethylene blends.1. Structure investigations in oriented, isotropic polyamide 6 Polymer 46 3 2005 887 901 (Pubitemid 40091778)
14. R.M. Holsti-Miettinen, K.P. Perttiä, J.V. Seppälä, and M.T. Heino Oxygen barrier properties of polypropylene/polyamide 6 blends J Appl Polym Sci 58 1995 1551 1560
15. A.C.O. Gomes, B.G. Soares, M.G. Oliveira, M.F.L. Oliveira, and C.M. Paranhos PA6/NBR blends: improvement of processability and mechanical properties E-Polymers 106 2009
16. B.B. Wang, L.X. Hao, W. Wang, and G.S. Hu One step compatibilization of polyamide 6/poly(ethylene-1-octene) blends with maleic anhydride and peroxide J Polym Res 17 6 2010 821 826
17. Y. Yoo, L. Cui, P.J. Yoon, and D.R. Paul Morphology and mechanical properties of rubber toughened amorphous polyamide/MMT nanocomposites Macromolecules 43 2 2010 615 624
18. R. Jeziorska Reactive compatibilization of polyester elastomer/polyamide 6 blends with oxazoline functionalized low-density polyethylene Polimery 50 4 2005 291 297
19. R. Scaffaro, L. Botta, F.P. La Mantia, A. Gleria, R. Bertani, and F. Samperi Effect of adding new phosphazene compounds to poly(butylene terephtalate)/polyamide blends.II: Effect of different polyamides on the properties of extruded samples Polym Degrad Stab 91 10 2006 2265 2274 (Pubitemid 43963179)
20. G. Guerrica-Echevarria, J.I. Eguiazabal, and J. Nazabal Synergistic mechanical behaviour in new polyamide 6/poly(amino-ether) blends J Mater Sci 37 2002 4529 4535 (Pubitemid 35355683)
21. G. Guerrica-Echevarria, J.I. Eguiazabal, and J. Nazabal Water sorption in polyamide 6/poly(amino-ether) blends.II. Mechanical behaviour J Macromol Sci A 40 7 2003 705 714
22. S. Eceolaza, M. Iriarte, C. Uriarte, and A. Etxeberria Barrier propertiey enhancement of polyamide 6 by blending with a polyhydroxyamino-ether resin J polym Sci B: Polym Phys 47 2009 1625 1634
23. K. Akkapeddi, C. Brown, and D. Worley Annual Technology Conference 2003 Society Plastics Engineers Nashville, Tennessee pp. 2313-2317
24. A. Granado, J.I. Eguiazabal, and J. Nazabal High compatibility and improved barrier performance in blends based on a copolyester modified with a poly(amino ether) resin Macromol Mater Eng 291 2006 1074 1082 (Pubitemid 44495329)
25. E. Espuche, M. Escoubes, J.P. Pascault, and M. Taha Transport properties of thermoplastic/thermoset blends J Polym Sci Polym Phys 37 1999 473 483
26. T.D. Fornes, and D.R. Paul Structure and properties of nanocomposites based on nylon-11 and -12 compared with those based on nylon-6 Macromolecules 37 2004 7698 7709
27. F. Constantin, F. Fenouillot, J.P. Pascault, and R.J.J. Williams Post-crosslinkable blends: reactions between a linear poly(hydroxyl-amino ether) and a diepoxy Macromol Mater Eng 289 2004 1027 1032
28. J.O. Fernandez, G.M. Swallowe, and S.F. Lee Crystallization of nylon 11 under compressive high strain rates J Appl Polym Sci 80 2001 2031 2038 (Pubitemid 32371523)
29. H.F. Mark, N.G. Gaylord, and N.M. Bikales Encyclopedia of Polymer Science and Technology 1996 Wiley New York
30. A. Monticciolo, P. Cassagnau, and A. Michel Fibrillar morphology development of PE/PBT blends: rheology and solvent permeability Polym Eng Sci 38 1 1998 1882 1888
31. Y. Derail, R. Fulchiron, and P. Cassagnau Morphology development in immiscible polymer blends during crystallization of the dispersed phase under shear flow Polymer 43 2002 3311 3321 (Pubitemid 34292927)
32. M.F. Boyaud, P. Cassagnau, A. Michel, M. Bousmina, and A. Aït-Kadi Transient elongational properties of an in situ generated polymer/polymer composite Polym Eng Sci 41 4 2001 684694
33. X. Si, L. Guo, Y. Wang, and K. Lau Preparation and study of polypropylene/polyethylene terephtalate composite fibres Compos Sci Technol 68 2008 2943 2947
34. M. Sarkissova, C. Harrats, G. Groeninckx, and S. Thomas Design and characterisation of microfibrillar reinforced composite materials based on PET/PA12 blends Compos A 35 2004 489 499
35. M. Evstatiev, J.M. Schultz, S. Fakirov, and K. Friedrich I situ fibrillar reinforced PET/PA-6/Pa-66 blend Polym Eng Sci 41 2 2001 192 204 (Pubitemid 32534230)
36. G.I. Taylor The viscosity of a fluid containing small drops of another fluid Proc R Soc Lond A146 1934 501
37. H.P. Grace Dispersion phenomena in high viscosity immiscible fluid system and application of static mixer as dispersion devices in such system Chem Eng Com 14 1982 225
38. J. Crank, and G.S. Park Diffusion in Polymers 1968 Academic Press London, New York