Application of taguchi method to study abrasive wear behavior of ceramic-coated specimens with plasma technique

Mechanics of Advanced Materials and Structures

Volumn 18, Issue 6, 2011, Pages 389-395

  Gok M S ^a   Kucuk Y ^a   Gencel, O ^a   Koc V ^b   Brostow, W ^c  

^a BARTIN UNIVERSITY   (Turkey)

^b University of Adiyaman   (Turkey)

^c UNIVERSITY OF NORTH TEXAS   (United States)

Author keywords

Abrasive wear; analysis of variance; ceramic coatings; plasma spray; Taguchi technique

Indexed keywords

ABRASIVE WEAR BEHAVIOR; CERAMIC POWDER; COATED SURFACE; EXPERIMENTAL DESIGN METHOD; GRIT SIZE; LOAD FACTORS; NORMAL LOADS; PLASMA METHODS; PLASMA SPRAY; SIGNAL TO NOISE; TAGUCHI TECHNIQUE; TEST DATA; TEST PARAMETERS; TEST RESULTS;

ABRASION; ABRASIVE COATINGS; ABRASIVES; BEHAVIORAL RESEARCH; CARBON STEEL; CERAMIC COATINGS; CERAMIC MATERIALS; PLASMA SPRAYING; POWDERS; PROTECTIVE COATINGS; TAGUCHI METHODS; WEAR RESISTANCE;

ANALYSIS OF VARIANCE (ANOVA);

EID: 80052637285     PISSN: 15376494     EISSN: 15376532     Source Type: Journal    
DOI: 10.1080/15376494.2011.563413     Document Type: Article

References (35)

1. J.R. Davis, Handbook of Thermal Spray Technology. ASM International, Materials Park, OH, 2004.
2. P.L. Ko, and M.F. Robertson, Wear Characteristics of Electrolytic Hard Chrome and Thermal Sprayed WC-10Co-4Cr Coatings Sliding Against Al-Ni-Bronze in Air at 21°C and at-40°C, Wear, vol. 252, pp. 880-893, 2002. (Pubitemid 34811170)
3. T. Saharoui, N.E. Fenineche, G. Montavon, and C. Coddet,Wear Behaviour of Thermally Sprayed Ceramic Oxide Coatings, J. Mater. Process. Technol., vol. 152, pp. 43-55, 2004.
4. F. Rastegar, and D.E. Richardson, Alternative to Chrome: HVOF Cermet Coatings for High Horse Power Diesel Engines, Surf. Coat. Technol., vol. 90, pp. 156-193, 1997.
5. M.R. Dorfman, Thermal Spray Materials, Adv. Mater. Process., vol. 160, pp. 49-51, 2002.
6. H. Herman, S. Sampath, and R. McCune, Thermal Spray Processing of Materials, MRS Bulletin, pp. 17-25, 2000.
7. R.B. Heimann, Application of Plasma-Sprayed Ceramic Coatings, Eng. Mater., vol. 122-124, pp. 399-442, 1996.
8. M. Hocking, and V. Vasantasree, Metallic and Ceramic Coatings, UK: Longman Scientific and Technical Publishers, pp. 24-26, 1989.
9. C. Ö ner, H. Hazar, and M. Nursoy, Surface Properties of CrN Coated Engine Cylinders, Mater. & Design, vol. 30, pp. 914-920, 2009.
10. C. Friedrich, G. Berg, E.Z. Bras, and F. Rick, PVD CrxN Coatings for Tribology Application on Piston Rings, Surf. Coat. Technol., vol. 97, pp. 661-668, 1997.
11. R.K. Roy, Primary on Taguchi Method, Vol. 40. New York: Van Nostrand Reinhold, pp. 155-211, 1990.
12. G. Taguchi, Introduction to Quality Engineering. Asian Productivity Organization, Tokyo, 1990.
13. G.S. Peace, Taguchi Methods: A Hands-on Approach, Addison Wesley, Reading, MA, 1993.
14. PJ. Ross, Taguchi Techniques for Quality Engineering. Mc-Graw-Hill, New York, 1988.
15. M. Nalbant, H. G̈okkaya, and G. Sur, Application of Taguchi Method in the Optimization of Cutting Parameters for Surface Roughness in Turning. Mater. & Design, vol. 28, pp. 1379-1385. 2007. (Pubitemid 44817462)
16. A.M. Abuelnaga, and M.A. El-Dardiry, Optimization Methods for Metal Cutting, J. Machine Tool Design & Res., vol. 24, pp. 11-18, 1984.
17. W.H. Yang, and Y.S. Tarng, Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method, J. Mater. Process. Technol., vol. 84, pp. 122-129. 1998. (Pubitemid 128638952)
18. H. Singh, and P. Kumar, Optimizing Cutting Force for Turned Parts by Taguchi's Parameter Design Approach, Indian J. Eng. & Mater. Sci., vol. 12, pp. 97-103, 2005. (Pubitemid 41712119)
19. W. Grzesik,Wear Development onWiper Al2O3-TiCMixed Ceramic Tools in Hard Machining of High Strength Steel,Wear, vol. 266, pp. 1021-1028, 2009.
20. K.Venkateswarlu,V. Rajinikanth, T.Naveen, and D.P. Sinha,AbrasiveWear Behavior of Thermally Sprayed Diamond Reinforced Composite Coating Deposited with Both Oxy-Acetylene and HVOF Techniques, Wear, vol. 266, pp. 995-1002, 2009.
21. X. Pang, K. Gao, F. Luo, Y. Emirov, and A.A. Levin, Investigation of Microstructure andMechanical Properties of Multi-Layer Cr/Cr2O3 Coatings, Thin Solid Films, vol. 517, pp.1922-1927. 2009.
22. M. Fallqvist,M. Olsson, and S. Rupi, AbrasiveWear of Texture-Controlled CVD alpha-Al2O3 Coatings, Surf. & Coatings Technol., vol. 202, pp. 837-843, 2007.
23. P.H. Shipway, and J.J. Hogg, Wear of Bulk Ceramics in Micro-Scale Abrasion-The Role of Abrasive Shape and Hardness and Its Relevance to Testing of Ceramic Coatings, Wear, vol. 263, pp. 887-895, 2007. (Pubitemid 47284301)
24. C. Meriç, S. Ş ahin, B. Backir, and N.S.K̈oksal, Investigation of the Boronizing Effect on Wear Behavior in Cast Irons, Mater. & Design, vol. 27, pp. 751-757, 2006. (Pubitemid 44225962)
25. O. P. Modi, D.P.Mondal, B.K. Prasad,M. Singh, and H.K. Khaira, Abrasive Wear Behavior of a High Carbon Steel: Effects of Microstructure and Experimental Parameters and Correlation with Mechanical Properties, Mater. Sci. & Eng., vol. 343, pp. 235-242, 2003. (Pubitemid 36036000)
26. K.H. Zum Gahr, Microstructure and Wear of Materials. Tribology Series, vol. 10, pp. 304, Elsevier, Amsterdam, 1987.
27. D.A. Rigney, ASM Materials Science Seminar, Fundamental of Friction and Wear of Materials. Pittsburgh, PA, 1981.
28. T. Zhaohe, D. Chuanxian, and Y. Dongsheng, A Fracture Model for Wear Mechanism in Plasma Sprayed Ceramic CoatingMaterials,Wear, vol. 155, pp. 309, 1992.
29. ASM Handbook, Friction, Lubrication, and Wear Technology, Vol. 18. ASM International, Materials Park, OH, pp. 101-117, 2004.
30. C. Martini, G. Palombarini, G. Poli, and D. Prandstraller, Slinding and AbrasiveWear Behaviour of Boride Coatings,Wear, vol. 256, pp. 608-613, 2004. (Pubitemid 38371008)
31. B. Venkataraman, and G. Sundararajan, High Speed SlidingWear Behavior of Boronized Medium Cabon Steel, Surf. & Coat Technol., vol. 73, pp. 177-184, 1995.
32. H. Sin, N. Saka, and P. Suh, Abrasive Wear Mechanisms and the Grit Size Effect, Wear, vol. 55, p. 163, 1979.
33. M.H. Korkut, and M.S. G̈ok, Abrasive Wear Characteristics Of Coating Area Of Low Carbon Steel Surface Alloyed through Tungsten İnert Gas Welding Process, Surf. Eng., vol. 25, pp. 517-525, 2009.
34. M.S. G̈ok, The Effect of Different Ceramics on the AbrasiveWear Behavior of Coating Surface Produced by the Plasma Process, Intl. J. Phys. Sci., vol. 5, no. 5, pp. 535-546, 2010.
35. J. Goddard, and H. Wilman, A Theory of Friction and Wear during the Abrasion of Metals, Wear, vol. 5, pp. 114-113, 1962.