Process simulation for pulp and paper industries: Current practice and future trend

Chemical Product and Process Modeling

Volumn 3, Issue 1, 2008, Pages

  Dahlquist, Erik ^a  

^a MÄLARDALEN UNIVERSITY   (Sweden)

Author keywords

optimization; OTS; process simulation; pulp and paper industries

Indexed keywords

DATA RECONCILIATION; DCS SYSTEM; DECISION SUPPORTS; FUTURE TRENDS; GREY-BOX MODELS; HISTORICAL PERSPECTIVE; MODEL BASED CONTROLS; ON-LINE APPLICATIONS; OPERATOR TRAINING; OPTIMIZATION AND CONTROL; OTS; PHYSICAL MODEL; PROCESS SIGNALS; PROCESS SIMULATIONS; PULP AND PAPER INDUSTRIES; PULP AND PAPER INDUSTRY; QUALITY PROPERTIES; RESEARCH AND DEVELOPMENT; ROOT CAUSE ANALYSIS; SCIENTIFIC PAPERS; SOFT SENSORS; SOFTWARE VENDORS;

DECISION SUPPORT SYSTEMS; ENGINEERING RESEARCH; EXPERT SYSTEMS; MODELS; OPTIMIZATION; PERSONNEL TRAINING; PROBLEM SOLVING; PULP; SENSORS;

PAPER AND PULP INDUSTRY;

EID: 80052509227     PISSN: 19342659     EISSN: None     Source Type: Journal    
DOI: 10.2202/1934-2659.1087     Document Type: Review

References (74)

1. HYSYS simulator from Aspentech: http://www.aspentech.com/products/ product.cfm?ProductID=274
2. Emerson Process Management: DeltaV Simulate http://www.emersonprocess. com/home/Plant web university, tool to increase operational performance http://www.easydeltav.com/productdata/pds/index.asp with the product Delta V Simulate (mostly DCS training)
3. Siemens Energy and Automation: http://www2.sea.siemens.com/Training/ Simulator+Systems/Honeywell Process Solutions : http://www.honeywell.com/sites/ acs/
4. http://hpsweb.honeywell.com/Cultures/en-US/Products/ControlApplications/ simulation/default.htm
5. ABB Process optimization: http://library.abb.com/GLOBAL/SCOT/scot267.nsf/ VerityDisplay/C0D6D26FB4 2C837885256D0B00594B6C/$File/APC-final-med.pdf
6. ABB Optimize IT Predict and control (2003) Andritz/IDEAS Simulation and Control: http://www.ideassimulation. com/content/ArchivesItem.phtml?art= 90&c=0&id=11&style= Modelica/Dymola: http://www.dynasim.se/gPROMS/ PSE: http://www.psenterprise.com/gproms/index.html FLOWMAC/PAPERMAC: http://www.papermac.se/flowmac.html APROS: http://apros.vtt.fi/Metsos WinGEMS (earlier Pacific Simulation): http://www.metsoautomation.com/automation/index. nsf/FR?ReadForm&ATL=/A utomation/pp-prod.nsf/WebWID/WTB-061205-2256F-8ECE6 GENSYM: G2 expertsystem: http://www.gensym.com/ABACUS: http://www.simulia.com/
7. Crowe C.M., et-al, "Reconciliation of process flow rates by matrix projection. Part I: Linear case", American Institute of Chemical Engineers Journal, volume 29, No 6, 1983.
8. Jensen, F.V., "Bayesian Networks and Decision Graphs", Springer Verlag, 2001, New York, ISBN 0-387-95259-4.
9. Karlsson C., Dahlquist E. ,Dotzauer. E.: Data Reconciliation and Gross Error Detection for Sensors in the Flue Gas Channel in a Heat and Power Plant, PMAPS 2004
10. Laperriere L.: Data Reconciliation 101-Challenges and Benefits, 2007 Engineering, Pulping & Environmental Conference
11. Laperrière, L., Paris, J. A Data Reconciliation Approach for Pulp and Paper Simulations: An Illustrative Example, 2003 Fall Technical Conference
12. Romagnoli J.A., Sanchez C.S., "Process systems engineering volume 2, Data Processing and Reconciliation for Chemical Process Operations", Academic Press, San Diego, USA, 2000
13. Wasik L., Tannar D and Alexander D.: Mill Information System Uses Dynamic Data Reconciliation for Accurate Energy Accounting , 2007 TAPPI Engineering, Pulping & Environmental Conference
14. Weidl G.,Madsen A L, Dahlquist E.(2002) Bayesian Networks for Root cause analysis in Process operation, European Journal of Operational Research, Special issue on "Advances in Complex Systems Modeling".
15. Weidl G, Dahlquist E. (2002) Root Cause Analysis for Pulp and Paper Applications, In proceedings of 10th SPCI Control conference ,pp 343-347,Stockholm,Sweden, June 3-5,2002.
16. Barber V. and Scott M.:Dynamic Modeling of a Paper Machine, Part I: Programming and Software Development, TAPPI Journal, January 2007, Vol6(1).
17. Barber V. and Scott G.: Dynamic Modeling of a Paper Machine, Part II: Evaluation of Wet-End Model Dynamics, TAPPI Journal, February 2007 Vol 6 (2), p19-22.
18. Bhartiya, Dufour and Doyle ( 2001) : Thermal-Hydraulic modeling of a continuous pulp digester, in proceedings from Conference on Digester modeling in Annapolis, June, 2001
19. Christensen T., Albright L.F., and Williams T.J. A Mathematical Model of the Kraft Pulping Process. Technical Report 129, Purdue University, PLAIC, Purdue University, West Lafayette, IN 47907, May 1982.
20. Harms T., Smith B., Edwards L. and Gustafsson R. : Evaluating operating alternatives on a continuous digester with extended delignification, TAPPI Journal, February 1990, Vol. 73(2). P129-134 Used WinGEMS for dynamic optimization evaluation.
21. Harkonen, E. J., : A Mathematical Model for Two-Phase Flow in a Continuous Digester," Tappi J., 70, 122{126 (1987).
22. Malmberg B. and Edwards L.:Dynamic Modeling of Pressurized Peroxide Stages With Application to Full Bleach Plant Simulation, TAPPI Journal, February 2007, Vol6(2)
23. Motta Lima O., Pereira N. , and Deganutti F.: Study of the multicylinder drying section of the Klabin-PR MP-7 paper machine, TAPPI Journal, December 2005, Vol. 4(12)
24. Olsson M. and Berntsson T.:A Tool for Simulating Energy Efficient Evaporation Using Excess Heat in Kraft Pulp Mills, 2007 Engineering, Pulping & Environmental Conference
25. Qian X. and P. Tessier :Dynamic behavior of a pulp processing and reject refining plant, TAPPI Journal, April 2000, Vol. 83(4)
26. Reardon S., Davis M. ,Doe P.:Computational modelling of paper drying machines, TAPPI Journal, September 2000, Vol. 83(9)
27. Rouzinou, S., Retsina, T., Cooper, A. Pinch Analysis: A Powerful Tool for the Integration of New Process Equipment Into Existing Pulp and Paper Mills, 2003 Fall Technical Conference
28. Sand A., Toivaka M. and Hjelt T.:Investigations of filtercake stability using a numerical simulation technique, TAPPI Journal February 2008, Vol7(2), p 4-10.
29. Scharcanski J., Dodso C.n, and Clarke R.: Nonwoven structure statistics: simulation of effects of fiber crimp, flocculation, density and orientation, International Nonwovens Journal, April 2002, Vol. 11(1)
30. Walkush K. and Gustafson R. : Application of pulping models to investigate the performance of commercial continuous digesters, Solutions! & TAPPI Journal, July 2002
31. Wilhelmsson B., Stenström S., Nilsson L., Krook R., Persson H., and Wimmerstedt R. :Modeling multicylinder paper drying-validation of a new simulation program, TAPPI Journal, April 1996, Vol. 79(4)
32. Villforth K., Schabel S. , Darmstadt University of Technology, Germany: Fiber classification-model development and validation. EU COST E36 Workshop in Espoo on Model validation, Finland, 5-7 October 2005
33. Wisnewski P.A., Doyle III F.J., and Kayihan F. Fundamental continuous pulp digester model for simulation and control. AIChE J., 43:3175-3192, 1997
34. de Kretser, D., Matthews, B., Williams, M. : Use of computational fluid dynamics to investigate natural and mechanically induced flows in an aerated lagoon, Solutions! & TAPPI Journal, April 2003, Vol. 2(4)
35. Ramaswamy, S., Gupta, M., Goel, A., Ramarao, B.V. : Characterization of 3D Structure of Porous Materials and their Application in Product Design and Development, 2004 Paper Summit, Spring Technical & International Environmental Conference, (including Papermakers; Process Control, Electrical & Information;
36. Rémi Vincent, Martine Rueff, and Christian Voillot : 3-D Simulation of Paper Structure in View of Optimizing Paper Production, 2006 Papermaker's Conference
37. Alonso A., Blanco A., Negro C., Complutense Univeristy of Madrid, Sao Piao, Holmen Paper Madrid, Spain: Validation as a crucial step for improving robustness of models: Application to paper quality predictions. EU COST E36 Workshop in Espoo on Model validation, Finland, 5-7 October 2005
38. Dahlquist E., Ekwall H.: ABB Industrial Systems AB, Jan Lindberg,Stefan Sundström: AssiDomän Dynäs, Thomas Liljenberg, Stefan Backa: ABB Corporate Research: On-line characterization of pulp-Stock preparation department. Proceedings SPCI conference 1999 in Stockholm.
39. Kamml G., Kappen J., PTS, Germany: Development of a tool to improve forecast accuracy of dynamic simulation models for paper process. EU COST E36 Workshop in Espoo on Model validation, Finland, 5-7 October 2005
40. Kappen Johannes, PTS, Germany: Modeling of quality problems. Application at Drewsen mill. EU DOTS project conference, Annecy, France, April 2005
41. Laperriere L. and Wasik L.: Modeling and simulation of pulp and paper quality characteristics using neural networks, Solutions!, October 2001, Vol. 84(10) p. 1-15
42. Li, Y.;, Laperriere, L., Lanouette, R. : Multivariate Analysis for the Development of a TMP Simulation Model 2005 Engineering, Pulping & Environmental Conference
43. Nilsen N., Zabihian M. and Niskanen K.: KCL-Pakka: A Tool for Simulating Paper Properties, TAPPI JOURNAL, May 1998, Vol. 81(5)
44. Pettersson J., Dahlquist E., Warnqvist J., Carlsson M.: On-line strength prediction and optimization for multi-ply kraft liner , Control Systems, Stockholm, 2002.
45. Rubini B. and Yamamoto C.: Development of Predictive Oxygen Delignification Models Using Kinetic Expressions and Neural Networks, TAPPI Journal, May 2006, Vol. 5(5) P3-6.
46. Taylor Matthew, Toft Graham, Iggesund, Wang Hong, Brown Martin, University of Manchester, UNITED KINGDOM, MVDA methodology for online process monitoring, Control Systems 2006 ,Tampere, Finland, June 6-8, 2006
47. Mansfield, M.;, Bohmer, V. : Computer Simulation of Minimum Impact Mills, 2003 Environmental Conference Proceedings Ruiz Jean: Management of complex water systems: Condat and papeteries de Lancey examples. EU DOTS project conference, Annecy, France, April 2005
48. Sedgwick G.,Moore D., Lyka W. and Denton R.:Control of the Activated Sludge Treatment Process, 1998 Environmental Conference Proceedings
49. Towers M.: Energy reduction at a kraft mill: examining the effects of process integration, benchmarking, and water reduction, TAPPI Journal & Solutions! March 2005, Vol. 4(3). P15-21
50. Avelin A., Jansson J. and Dahlquis E.: Use of mathematical models and simulators for on-line applications in Pulp and Paper industry. Mathmod conference, Vienna, Febr 2006
51. Brooks, T.R., Edwards, L.L. : Real-Time, Model-Based Evaporator Expert System. 1992 Process & Product Quality Conference Proceedings
52. Belle Juergen, Goedsche Frank, PTS, Munich Germany.: Developing a generic method for paper mill optimization, Control Systems, Quebec city, Canada, June 14-17, 2004
53. Fan Junqiang, Stewart Gregory E., Nazem Bijan, Gheorge Cristian, Honeywell, CANADA , Automated tuning of multiple array cross-directional model predictive controllers, Control Systems 2006 ,Tampere, Finland, June 6-8, 2006
54. Jansson J., Dahlquist E., Subramani S.R.: Applications of physical models for optimization and control in pulp and paper industry, Asia Paper, April 22-26, 2002.
55. Kvarnström J. And Dotzauer E.: Lastprognoser för fjärrvärme (Load forecasts for distric heating systems). In Swedish. Värmeforsk, Scandinavian Heat and Power Producers Research Organization. February 2008.
56. Lappalainen, J., Myller, T., Vehviläinen, O., Tuuri, S., Juslin, K. : Enhancing grade changes using dynamic simulation, TAPPI Journal, Online Exclusive, December 2003, Vol. 2(12)
57. Laperrière L., Wasik, L. Implementing optimization with process simulation, Solutions! & TAPPI Journal, June 2002 , Vol. 1(4)
58. Mercangöz Mehmet, Doyle Francis J., University of California, Santa Barbara, USA Plantwide optimization of a pulp mill process, Control Systems 2006 ,Tampere, Finland, June 6-8, 2006
59. Morari Manfred, software for MPC: http://control.ee.ethz.ch/research/ software.en.html,(2007)
60. Pettersson Jens, Ledung Lars, Xiaojing Zhang, ABB, SWEDEN Decision support for pulp mill operations based on large-scale on-line optimization, Control Systems 2006 ,Tampere, Finland, June 6-8, 2006
61. Ritala Risto Tampere university, Finland: Decision support tools in the pulp and paper industry-typical applications. EU DOTS project conference, Annecy, France, April 2005
62. Sidarak Y.: Model-based optimization of kamyr digester operation, TAPPI Journal, March 1995, Vol. 78(3) p 93-98.
63. Suojärvi Mika, Tienari Matti, KCL, Finland, Optimization of TMP production scheduling, Control Systems 2006, Tampere, Finland, June 6-8, 2006
64. Strand, B.C., Mokvist, A. : On-Line Control and Optimization of the Refining Process Using a Model Based Control System, 1991 International Mechanical Pulping Conference Proceedings
65. Vanchinathan, S. and G. Krishnagopalan, : Dynamic Modeling of Kraft Pulping of Southern Pine Based on On-line Liquor Analysis," Tappi J., 80, 123{133 (1997).
66. Berglin, N., Lindblom, M., Ekbom, T. : Efficient Production of Methanol from Biomass Via Black Liquor Gasification, 2002 Fall Technical Conference
67. Sung-Hoon Yoon and Peter Labosky, Jr. :Ethanol-Kraft Pulping and Papermaking Properties of Aspen and Spruce (Part II: Delignification kinetics, activation thermodynamics, and pulping prod, TAPPI Journal, April 1998, Vol. 81(4)
68. Ahrens, F., Loughran, J., Patterson, T., Rudman, I. :Investigation of a New Approach for Paper Heating and Drying Via Microwave Energy, Part 2: Economics, 2003 Spring Technical Conference Proceedings
69. Blanco Angeles, Dahlquist Erik, Kappen Johannes, Manninen Jussi, Negro Carlos and Ritala Risto: Modelling and simulation in the pulp and paper industry-current state and future perspectives. Articulo CCT Journal, 2005.
70. Cantrell J. :Simulation of Kraft Black Liquor Gasification-A Comparative Look at Performance and Economics, 2001 Engineering/Finishing & Converting Conference Proceedings. CADSIM Plus process simulation platform. Suojärvi Mika, KCL, Finland: Detailed case presentation: UPM Jämsänkoski mill-how was the context defined? How was the application built? What were the benefits for the paper maker? EU DOTS project conference, Annecy, France, April 2005
71. Thomas, B.;: Using dynamic process simulation for business and risk management, Solutions!, May 2003, Vol. 86(5)
72. Segal, M.G., Spangler, R., Hinton, C. : Multifaceted Training Program Yields Excellent Recovery Boiler Start-up, 1999 Engineering Conference Proceedings
73. Ryan Kevin and Dahlquist Erik.: MNI Experience with Process Simulation. Paper presented at Asia Paper 2002 in Singapore, 2002
74. Gu Y., Malmberg B., and Edwards L.: Internet based, interactive simulation: the concept and an evaporator example, Solutions! & TAPPI Journal, February 2003, Vol. 2(2) p 30-32.Using WinGEMS.