Determination of Asphalt Binder Creep Compliance Using Depth-Sensing Indentation

Experimental Mechanics

Volumn 51, Issue 8, 2011, Pages 1365-1377

  Zofka, A ^a   Nener Plante, D ^a  

^a UNIVERSITY OF CONNECTICUT   (United States)

Author keywords

3 point bending; Asphalt binder; Creep compliance; Depth sensing indentation; Indentation

Indexed keywords

3-POINT BENDING; ASPHALT BINDER; ASPHALT BINDERS; COMPLEX BEHAVIOR; CONTACT SURFACE; CREEP COMPLIANCE; CREEP LOAD; DEPTH SENSING INDENTATION; ENGINEERING MATERIALS; FEASIBILITY STUDIES; HIGHER TEMPERATURES; INDENTATION METHOD; INDENTATION TESTING; INDENTERS; LINEAR VISCOELASTIC; LOAD LEVELS; LOW TEMPERATURES; MICRO-DAMAGE; NON-LINEAR RESPONSE; NONLINEAR BEHAVIOR; STANDARD TESTS; TESTING METHOD;

ASPHALT; CREEP; CREEP TESTING; FINITE ELEMENT METHOD; LOAD TESTING; MECHANICAL PROPERTIES; STRESS CONCENTRATION; ADHESION; INDENTATION; MATERIALS TESTING;

BINDERS;

EID: 80052468502     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-011-9464-5     Document Type: Article

References (65)

1. Anderson DA, Christensen DW, Bahia HU, Dongre R et al (1994) Binder characterization and evaluation (SHRP A-369), physical characterization. Strategic Highway Research Program, National Research Council, Washington D. C.
2. American Association of State Highway and Transportation Officials (AASHTO) Standard T 315 (2009) Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer. Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
3. Bahia H, Anderson DA, Christensen D (1992) The bending beam rheometer; a simple device for measuring low-temperature rheology of asphalt binders. J Assoc Asphalt Paving Technol 61: 117-153.
4. Larsson P-L, Carlsson S (1998) On microindentation of viscoelastic polymers. Polym Test 17: 49-75.
5. Stilwell NA, Tabor D (1961) Elastic recovery of conical indentations. Proc Phys Soc 78: 169-179.
6. Tabor D (1951) The hardness of metals. Oxford University Press Inc.
7. Tabor D (1948) A simple theory of static and dynamic hardness. Proc R Soc Lond 192: 247-274.
8. Feng C, Tannenbaum J, Kang B, Alvin M (2008) A load-based multiple-partial unloading micro-indentation technique for mechanical property evaluation. Exp Mech (in press). doi: 10. 1007/s11340-009-9271-4.
9. VanLandingham R (2003) Review of instrumented indentation. J Res Natl Inst Stand Technol 108: 249-265.
10. Vandamme M, Ulm F (2006) Viscoelastic solutions for conical indentation. Int J Solids Struct 43: 3142-3165.
11. Lu H, Wang B, Ma J, Huang G et al (2003) Measurement of creep compliance of solid polymers by nanoindentation. Mech Time-Depend Mater 7: 189-207.
12. Sakai M, Shimizu S, Miyajima N, Tanabe Y et al (2001) Viscoelastic indentation on iodine-treated coal tar pitch. Carbon 39: 605-614.
13. Ramesh-Kumar M, Narasimhan R (2004) Analysis of spherical indentation of linear viscoelastic materials. Curr Sci 87: 1088-1095.
14. Zhou Z, Lu H (2010) On the measurements of viscoelastic functions of a sphere by nanoindentation. Mech Time-Depend Mater 14: 1-24.
15. Deng M, Uhrich KE (2010) Viscoelastic behaviors of ultrahigh molecular weight polyethylene under three-point bending and indentation loading. J Biomater Appl 24: 713-732.
16. Lu YC, Shinozaki DM (2010) Temperature dependent viscoelastic properties of polymers investigated by small-scale dynamic mechanical analysis. Exp Mech 50: 71-77.
17. Rubenstein DA, Venkitachalam SM, Zamfir D, Wang F, Lu H, Frame MD, Yin W (2010) In vitro biocompatibility of sheath-core cellulose-acetate-based electrospun scaffolds towards endothelial cells and platelets. J Biomat Sci 21: 1713-1736.
18. Lee EH, Radok JR (1960) The contact problem for viscoelastic bodies. Trans Am Soc Mech Eng 30: 438-444.
19. Hertz H (1881) On the contact of elastic solids. J Reine Und Angewandte Mathematik 92: 156-171.
20. Shimizu S, Yanaimoto T, Sakai M (1999) Pyramidal indentation load-depth curve of viscoelastic materials. J Mater Res 14: 4075-4086.
21. Cheng L, Xia X, Yu W, Scriven L et al (2000) Flat-punch indentation of viscoelastic material. J Poly Sci B 38: 10-22.
22. Sneddon IN (1965) The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. Int J Eng Sci 3: 47-57.
23. Boussinesq J (1885) Application des potentiels: à l'étude de l'équilibre et du mouvement des solides élastiques. Gauthier-Villars, Paris.
24. Jager A, Lackner R, Eberhardsteiner J (2007) Identification of viscoelastic properties by means of nanoindentation taking the real tip geometry into account. Mecc 42: 293-306.
25. Huang G, Lu H (2007) Measurements of two independent viscoelastic functions by nanoindentation. Exp Mech 47: 87-98.
26. Giannakopoulos A (2006) Elastic and viscoelastic indentation of flat surfaces by pyramid indentors. J Mech Phys Solids 54: 1305-1332.
27. Oliver W, Pharr G (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7: 1564-1583.
28. Cheng Y, Cheng C (1998) Relationships between hardness, elastic modulus, and the work of indentation. Appl Phys Lett 73: 614-616.
29. Bolshakov A, Pharr G (1998) Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques. J Mater Res 13: 1049-1058.
30. Pharr G, Bolshakov A (2002) Understanding nanoindentation unloading curves. J Mater Res 17: 2660-2671.
31. Ma D, Ong C, Zhang T (2009) An instrumented indentation method for young's modulus measurement with accuracy estimation. Exp Mech 49: 719-729.
32. Oliver W, Pharr G (2004) Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 19: 3-20.
33. Soons J, de Baere I, Dirckx J (2010) New double indentation technique for measurement of the elasticity modulus of thin objects. Exp Mech (Accepted). doi: 10. 1007/s11340-010-9340-8.
34. Lee EH (1955) Stress analysis in visco-elastic bodies. Q Appl Math 13: 183-190.
35. Hunter S (1960) The hertz problem for a rigid spherical indenter and a viscoelastic half-space. J Mech Phys Solids 8: 219-234.
36. Ting TCT (1966) Contact stresses between a rigid indenter and a viscoleastic half-space. J Appl Mech 33: 845-854.
37. Lu YC, Shinozaki DM (2009) Temperature dependent viscoelastic properties of polymers investigated by small-scale dynamic mechanical analysis. Exp Mech 50: 71-77.
38. Cheng L, Xia X, Scriven L, Gerberich W (2005) Spherical-tip indentation of viscoelastic material. Mech Mater 37: 213-226.
39. Odergard GM, Gates TS, Herring HM (2005) Characterization of viscoelastic properties of polymeric materials through nanoindentation. Exp Mech 45: 130-136.
40. Sakai M (2002) Time-dependent viscoelastic relation between load and penetration for an axisymmetric indenter. Philos Mag A 82: 1841-1849.
41. Ossa E, Deshpande V, Cebon D (2005) Spherical indentation behaviour of bitumen. Acta Mater 53: 3103-3113.
42. Bower AF, Fleck NA, Needleman A, Ogbonna N (1993) Indentation of a power law creeping solid. Proc R Soc A 441: 97-124.
43. Ossa EA, Collop AC (2007) Spherical indentation behavior of asphalt mixtures. J Mater Civ Eng 19: 753-761.
44. Jager A, Lackner R, Eberhardsteiner J (2007) Identification of viscoelastic properties by means of nanoindentation taking the real tip geometry into account. Mecc 42: 293-306.
45. Zofka A, Marasteanu M, Clyne T, Li X et al (2004) Development of simple asphalt test for determination of rap blending charts. Mn/DOT, Office of Research Services.
46. Western Research Institute (2009) Quarterly technical progress report july 1 - september 2009. Asphalt Research Consortium. http://www. arc. unr. edu/Reports/QuarterlyReport_Jul-Sept_09. pdf. Accessed 15 April 2010.
47. Nener-Plante DJ (2010) Determination of Asphalt Binder Creep Compliance Using Depth-Sensing Indentation. MS Thesis, University of Connecticut.
48. American Association of State Highway and Transportation Officials (AASHTO) Standard T 240 (2009) Standard method of test for effect of heat and air on a moving film of asphalt binder (rolling thin-film oven test). Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
49. American Association of State Highway and Transportation Officials (AASHTO) Standard R 28 (2009) Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel. Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
50. Anderson DA, Marasteanu MO (1999) Physical hardening of asphalt binders relative to their glass transition temperatures. Transp Res Rec 1661: 27-34.
51. American Association of State Highway and Transportation Officials Standard (AASHTO) T 313 (2009) Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer. Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
52. Cheng Y, Cheng C (2005) Relationships between initial unloading slope, contact depth, and mechanical properties for spherical indentation in linear viscoelastic solids. Mater Sci Eng 409: 93-99.
53. Sybilski D, Vanelstraete A, Partl M (2004) Recommendation of RILEM TC 182-peb on bending beam and rheometer measurements of bituminous binders. Mater Struc 37: 539-546.
54. Di Benedetto H, Delaporte B, Sauzéat C (2007) Three-dimensional linear behavior of bituminous materials: experiments and modeling. Int J Geomech 7: 149-157.
55. Abbas AR, Papagiannakis AT, Masad EA (2004) Linear and nonlinear viscoelastic analysis of the microstructure of asphalt concretes. J Mater Civ Eng 16: 133-139.
56. Sakaue K, Okazaki S, Ogama T (2010) Indentation technique for evaluation of master curve of creep compliance. Exp Tech (Accepted). doi: 10. 1111/j. 1747-1567. 2010. 00616. x.
57. Oyen M, Bushby A (2007) Viscoelastic effects in small-scale indentation of biological materials. Int J Surf Sci Eng 1: 180-197.
58. Vanlandingham M, Chang N, Drzal P, White C et al (2005) Viscoelastic characterization of polymers using instrumented indentation. i. quasi-static testing. J Polym Sci B 43: 1794-1811.
59. Tweedie CA, van Vliet KJ (2006) Contact creep compliance of viscoelastic materials via nanoindentation. J Mater Res 21: 1576-1589.
60. Anderson DA, Lapalu L, Marasteanu MO, Le Hir YM et al (2001) Low-temperature thermal cracking of asphalt binders as ranked by strength and fracture properties. Transp Res Rec 1766: 1-6.
61. Mark R, Findley WN (1974) Nonlinear creep of polyurethane under combined stresses and elevated temperature. Trans Soc Rheol 18: 563-582.
62. Findley WN, Lai JS, Onaran K (1989) Creep and relaxation of nonlinear viscoelastic materials with an introduction to linear Viscoelasticity. Dover Pub INC New York (page 257).
63. Marasteanu M, Anderson D (2001) Techniques for determining errors in asphalt binder rheological data. Transp Res Rec 1766: 32-39.
64. Park S, Kim Y (2001) Fitting prony-series viscoelastic models with power-law presmoothing. J Mater Civ Eng 13: 26-32.
65. Kim Y, Lee Y, Lee H (1995) Correspondence principle for characterization of asphalt concrete. J Mater Civ Eng 7: 59-68.