Effect of poly (styrene-co-acrylonitrile) on β-nucleation of polypropylene filled with supported β-nucleating agent

Thermochimica Acta

Volumn 524, Issue 1-2, 2011, Pages 157-164

  Wang, Chunguang ^a,b,c   Zhang, Zishou ^a,b,c   Du, Yifei ^a,b,c   Zhang, Junping ^a,b,c   Mai, Kancheng ^a,b,c  

^a SUN YAT SEN UNIVERSITY   (China)

^b BEIJING UNIVERSITY OF POSTS AND TELECOMMUNICATIONS   (China)

^c Key Laboratory of Designed Synthesis and Application of Polymer Material of Guangdong Province   (China)

Author keywords

Nucleating agent; Nucleation; Poly (styrene co acrylonitrile); Polypropylene

Indexed keywords

AS CONTENT; DSC STUDIES; HIGH-CONTENT; MELTING CHARACTERISTICS; NUCLEATING AGENTS; POLY(STYRENE-CO-ACRYLONITRILE);

FILLED POLYMERS; NUCLEATION; PHASE INTERFACES; STYRENE; THERMOPLASTICS;

POLYPROPYLENES;

EID: 80052333616     PISSN: 00406031     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tca.2011.07.008     Document Type: Article

References (41)

1. X. Yi, L. Xu, Y. Wang, G. Zhong, X. Ji, and Z. Li Morphology and properties of isotactic polypropylene/poly(ethylene terephthalate) in situ microfibrillar reinforced blends: influence of viscosity ratio Eur. Polym. J. 46 2010 719 730
2. K. Jayanarayanan, T. Jose, S. Thomas, and K. Joseph Effect of draw ratio on the microstructure, thermal, tensile and dynamic rheological properties of insitu microfibrillar composites Eur. Polym. J. 45 2009 1738 1747
3. Y. Tao, Y. Pan, Z. Zhang, and K. Mai Non-isothermal crystallization, melting behavior and polymorphism of polypropylene in β-nucleated polypropylene/recycled poly(ethylene terephthalate) blends Eur. Polym. J. 44 2008 1165 1174
4. P. Motamedi, and R. Bagheri Investigation of the nanostructure and mechanical properties of polypropylene/polyamide 6/layered silicate ternary nanocomposites Mater. Des. 31 2010 1776 1784
5. Q. Wang, X. Wang, P. Fang, D. Wang, Y. Dai, S. Wang, K.M. Liew, and Z. Xu Crystallization behavior of polypropylene/polyamide 6/montmorillonite nanocomposites Polym. Int. 59 2010 1303 1309
6. Z. Yang, and K. Mai Crystallization and melting behavior of β-nucleated isotactic polypropylene/polyamide 6 blends with maleic anhydride grafted polyethylene-vinyl acetate as a compatibilizer Thermochim. Acta 511 2010 152 158
7. K. Yoshida, T. Kawamura, M. Terano, and K.H. Nitta Effects of bulk morphology on the mechanical properties of melt-blended PP/PS blends J. Appl. Polym. Sci. 109 2008 211 217
8. J. Li, H. Li, C. Wu, Y. Ke, D. Wang, Q. Li, L. Zhang, and Y. Hu Morphologies, crystallinity and dynamic mechanical characterizations of polypropylene/polystyrene blends compatibilized with PP-g-PS copolymer: effect of the side chain length Eur. Polym. J. 45 2009 2619 2628
9. Y. Zhang, Y. Huang, and K. Mai Crystallization and dynamic mechanical properties of polypropylene/polystyrene blends modified with maleic anhydride and styrene J. Appl. Polym. Sci. 96 2005 2038 2045 (Pubitemid 40751505)
10. S. Hom, A.R. Bhattacharyya, R.A. Khare, A.R. Kulkarni, M. Saroop, and A. Biswas PP/ABS blends with carbon black: morphology and electrical properties J. Appl. Polym. Sci. 112 2009 998 1004
11. M. Šlouf, J. Kolarík, and J. Kotek Rubber-toughened polypropylene/acrylonitrile-co-butadiene-co-styrene blends: morphology and mechanical properties Polym. Eng. Sci. 47 2007 582 592 (Pubitemid 46715368)
12. Y.T. Sung, Y.S. Kim, Y.K. Lee, W.N. Kim, H.S. Lee, J.Y. Sung, and H.G. Yoon Effects of clay on the morphology of poly(acrylonitrile-butadiene-styrene) and polypropylene nanocomposites Polym. Eng. Sci. 47 2007 1671 1677 (Pubitemid 47573752)
13. S.S. Morye A comparison of the thermoformability of a PPE/PP blend with thermoformable ABS. Part I: small deformation methods Polym. Eng. Sci. 45 2005 1369 1376 (Pubitemid 41658477)
14. S.S. Morye Comparison of the thermoformability of a PPE/PP blend with thermoformable ABS. Part II: large deformation methods Polym. Eng. Sci. 45 2005 1377 1384 (Pubitemid 41658478)
15. A.C. Patel, R.B. Brahmbhatt, and S. Devi Mechanical properties and morphology of PP/ABS blends compatibilized with PP-g-2-HEMA J. Appl. Polym. Sci. 88 2003 72 78 (Pubitemid 36234952)
16. A.C. Patel, R.B. Brahmbhatt, B.D. Sarawade, and S. Devi Morphological and mechanical properties of PP/ABS blends compatibilized with PP-g-acrylic acid J. Appl. Polym. Sci. 81 2001 1731 1741 (Pubitemid 32609120)
17. A.K. Gupta, A.K. Jain, and S.N. Maiti Studies on binary and ternary blends of polypropylene with ABS and LDPE. I. Melt rheological behavior J. Appl. Polym. Sci. 38 1989 1699 1717 (Pubitemid 20599630)
18. A.K. Gupta, A.K. Jain, B.K. Ratnam, and S.N. Maiti Studies on binary and ternary blends of polypropylene with ABS and LDPE. II. Impact and tensile properties J. Appl. Polym. Sci. 39 1990 515 530 (Pubitemid 20638025)
19. A. Kirchberger, and H. Münstedt Droplet deformation under extensional flow in immiscible and partially miscible polymer blends based on poly(styrene-co-acrylonitrile) J. Rheol. 54 2010 687 704
20. Q. Yu, Q. Yang, Y. Huang, L. Bai, and B. Wang Effects of addition of glass bead on the rheology of immiscible polymer blend polypropylene/ poly(acrylonitrile-co-styrene) Gaofenzi Cailiao Kexue Yu Gongcheng Polym. Mater. Sci. Eng. 24 2008 92 95 99
21. S.N. Maiti, V. Agarwal, and A.K. Gupta Melt rheological behavior of PP-SAN blend J. Appl. Polym. Sci. 43 1991 1891 1900 (Pubitemid 21735051)
22. C.O. Hammer, and F.H.J. Maurer Barium sulfate-filled blends of polypropylene and poly(styrene-co-acrylonitrile) - dynamic mechanical melt state properties and interlayer effects Polym. Eng. Sci. 38 1998 1295 1302 (Pubitemid 128597859)
23. K.A. Pegoretti, L. Fambri, and A. Penati Polypropylene/elastomer/ poly(styrene-co-acrylonitrile) blends: manifestation of the critical volume fraction of SAN in dynamic mechanical, tensile and impact properties J. Polym. Res. 7 2000 7 14
24. S.C. Tjong, J.S. Shen, and R.K.Y. Li Impact fracture toughness of beta-form polypropylene Scr. Metall. Mater. 33 1995 503 508
25. J. Karger-Kocsis, J. Varga, and G.W. Ehrenstein Comparison of the fracture and failure behaviour of injection moulded alpha- and beta-polypropylene in high-speed three-point bending tests J. Appl. Polym. Sci. 64 1997 2059 2066
26. J. Karger-Kocsis, and J. Varga Effects of beta-alpha transformation on the static and dynamic tensile behaviour of isotactic polypropylene J. Appl. Polym. Sci. 62 1996 291 300 (Pubitemid 126535321)
27. J. Varga, and G. Garzó The properties of polymer blends of β-modification of polypropylene and an elastomer Angew. Makromol. Chem. 180 1990 15 33
28. J. Varga β-Modification of polypropylene and its Two-Component Systems J. Therm. Anal. 35 1989 1891 1912
29. J. Varga, F. Schulek Tóth, and I. Mudra Blends of the β-modification of polypropylene Makromol. Chem. Macromol. Symp. 78 1994 229 241
30. A. Menyhárd, J. Varga, Á. Liber, and G. Belina Polymer blends based on the β-modification of polypropylene Eur. Polym. J. 41 2005 669 677 (Pubitemid 40183341)
31. A. Menyhárd, and J. Varga The effect of compatibilizers on the crystallization, melting and polymorphic composition of β-nucleated isotactic polypropylene and polyamide 6 blends Eur. Polym. J. 42 2006 3257 3268 (Pubitemid 44708926)
32. R.H. Zhang, D. Shi, S.C. Tjong, and R.K.Y. Li Study on the β to α transformation of polypropylene crystals in compatibilized blend of polypropylene/polyamide-6 J. Polym. Sci. B: Polym. Phys. 45 2007 2674 2681 (Pubitemid 47477628)
33. Z. Yang, Z. Zhang, Y. Tao, and K. Mai Effects of polyamide 6 on the crystallization and melting behavior of β-nucleated polypropylene Eur. Polym. J. 44 2008 3754 3763
34. Z. Yang, Z. Zhang, Y. Tao, and K. Mai Preparation, crystallization behavior and melting characteristic of β-nucleated isotactic polypropylene blends with polyamide 6 J. Appl. Polym. Sci. 112 2009 1 8
35. Z. Yang, C. Chen, D. Liang, Z. Zhang, and K. Mai Melting characteristic and β-crystal content of β-nucleated polypropylene/polyamide 6 alloys prepared by different compounding methods Polym. Int. 58 2009 1366 1372
36. Z. Zhang, C. Wang, Z. Yang, and K. Mai Crystallization behaviors and melting characteristics of PP nucleated by a novel supported β-nucleating agent Polymer 49 2008 5137 5145
37. 3 supported β-nucleating agent of polypropylene Eur. Polym. J. 44 2008 1955 1961
38. 3 as support Polym. Int. 59 2010 1199 1204
39. J. Varga β-Modification of isotactic polypropylene: preparation, structure, processing, properties, and application J. Macromol. Sci. Phys. B: Phys. 41 2002 1121 1171
40. A. Turner-Jones, J. Aizlewood, and D. Beckett Crystalline forms of isotactic polypropylene Makromol. Chem. 75 1964 134 158
41. G. Shi, X. Chang, Y. Cao, and J. Hong Melting behaviour and crystalline order of β-crystalline phase polypropylene Makromol. Chem. 194 1993 269 277