Shape stability of modified engineering wood product subjected to moisture variation

Wood Material Science and Engineering

Volumn 6, Issue 3, 2011, Pages 132-139

  Nilsson, Jonaz ^a   Johansson, Jimmy ^a   Kifetew, Girma ^a   Sandberg, Dick ^a  

^a LINNAEUS UNIVERSITY   (Sweden)

Author keywords

Densified wood; Engineered wood products; Shape stability

Indexed keywords

BUILDING MATERIALS; LAMINATING; MOISTURE; SOFTWOODS; WOOD PRODUCTS;

CLIMATIC VARIATION; DENSIFIED WOOD; ENGINEERED WOOD PRODUCTS; MODIFICATION METHODS; MOISTURE VARIATION; RADIAL DIRECTION; SHAPE STABILITY; WOOD PROPERTIES;

STABILITY;

CONSTRUCTION MATERIALS; LAMINATION; MOISTURE; SOFTWOODS; STABILITY; WOOD; WOOD PRODUCTS;

EID: 80052251767     PISSN: 17480272     EISSN: 17480280     Source Type: Journal    
DOI: 10.1080/17480272.2011.552122     Document Type: Article

References (34)

1. Blomberg, J. (2006). Mechanical and physical properties of semiisostatically densified wood. PhD thesis (No. 2006:28), Lulea° University of Technology.
2. Burmester, V. A. (1973). Effect of heat- pressure treatments of semi-dry wood on its dimensional stability. Holz als Roh- und Werkstoff, 31, 237-243.
3. Dwianto, W., Norimoto, M., Morooka, T., Tanaka, F., Inoue, M. & Liu, Y. (1998). Radial compression of Sugi (Cryptomeria japonica D. Don). Holz als Roh- und Werkstoff, 56, 403-411.
4. Easterling, K. E., Harrysson, R., Gibson, L. J. & Ashby, M. F. (1982). On the mechanics of balsa and other woods. Proceedings of the Royal Society London A, 383, 31-41.
5. CEN (2001). EN 204. Classification of thermoplastic wood adhesives for non structural applications. Brussels: European Committee for Standardization.
6. Haygreen, J. G. & Daniels, D. H. (1969). The simultaneous drying and densification of sapwood. Wood and Fiber Science, 1, 38-53.
7. Heger, F. (2004). Etude du phénomène de l'élimination de la mémoire de forme du bois densifié par post-traitement thermo-hydromécanique. PhD thesis (No. 3004), EPFL, Lausanne.
8. Inoue, M., Norimoto, M., Takahashi, M. & Rowell, R. M. (1993a). Steam or heat fixation of compressed wood. Wood and Fiber Science, 25, 224-235.
9. Inoue, M., Ogata, S., Kawai, S., Rowell, R. M. & Norimoto, M. (1993b). Fixation of compressed wood using melamine-formaldehyde resin. Wood and Fiber Science, 25, 404-410.
10. Ito, Y., Tanahashi, M., Shigematsu, M., Shinoda, Y. & Otha, C. (1998a). Compressive-molding of wood by high-pressure steam-treatment: Part 1. Development of compressively molded squares from thinnings. Holzforschung, 52, 211-216.
11. Ito, Y., Tanahashi, M., Shigematsu, M. & Shinoda, Y. (1998b). Compressive-molding of wood by high-pressure steam-treatment: Part 2. Mechanism of permanent fixation. Holzforschung, 52, 217-221.
12. Kemal, M. Y., Imamura, Y., Takahashi, M., Demirci, Z. & Yalinkilic, A. C. (1999). Biological, mechanical, and thermal properties of compressed-wood polymer composite (CWPC) pretreated with boric acid. Wood and Fiber Science, 31, 151-163.
13. Gabrielli, C. & Kamke, F. A. (2008). Treatment of chemically modified wood with VTC process to improve dimensional stability. Forest Products Journal, 58, 82-86.
14. Kamke, F. A. (2006). Densified radiata pine for structural composites. Maderas. Ciencia y Tecnologia, 8, 83-92.
15. Kifetew, G. & Wiklund, M. (1999). Ha°rdpress. Swedish Patent Application No. 9901796-4.
16. Kollmann, F. (1936). Technologies des Holzes. Berlin: Verlag von Julius Springer.
17. Lindhe, C. (1993). Process for producing hard elements of wood. Swedish Patent Application No. 931118.
18. Navi, P. & Girardet, F. (2000). Effects of thermo-hydro-mechanical treatment on the structure and properties of wood. Holzforschung, 54, 287-293.
19. Navi, P. & Heger, F. (2005). Comportement thermo-hydromécanique du bois. Lausanne: Presses polytechniques et universitaires romandes.
20. Navi, P., Girardet, F., Vulliemin, P., Spycher, M. & Heger, F. (2007). Effects of post-treatment parameters on densified wood set-recovery. In P. Navi & A. Guidoum (Eds.), Proceedings of Third International Symposium on Wood Machining, PPUR, Lausanne, Switzerland (pp. 69-72).
21. Norimoto, M., Ota, C., Akitsu, H. & Yamada, T. (1993). Permanent fixation of bending deformation in wood by heat treatment. Wood Research, 79, 23-33.
22. Rautkari, L., Properzi, M., Pichelin, F. & Hughes, M. (2010). Properties and set-recovery of surface densified Norway spruce and European beech. Wood Science and Technology, 44, 679-691.
23. Sandberg, D. (1998a). Inverkan av isostatisk komprimering pa° cellstrukturen (Influence of iso-static compression on the wood cell structure) (Rep. No. TRITA-TRÄ R-98-35). Stockholm: KTH, Royal Institute of Technology, Wood Technology and Processing.
24. Sandberg, D. (1998b). Value activation with vertical annual rings: material, production, products. PhD thesis (No. TRITA-TRÄR-98-36). KTH, Royal Institute of Technology, Stockholm.
25. Sandberg, D. (2005). Radially sawn timber -The PrimWood Method for improved properties. Holz als Roh- und Werkstoff, 63, 1-9.
26. Schrepfer, V. & Schweingruber, F. H. (1998). Anatomical structures in reshaped press-dried wood. Holzforschung, 52, 615-622.
27. Seborg, R. M., Millet, M. A. & Stamm, A. J. (1945). Heat stabilised compressed wood. Mechanical Engineering, 67, 25-31.
28. Seltman, J. (1995). Freilegen der Holzstruktur durch UVBestrahlung (Opening the wood structure by UV-irradiation). Holz als Roh- und Werkstoff, 53, 225-228.
29. Stamm, A. J. (1964). Wood and cellulose science. New York: Ronald Press.
30. Stamm, A. J. & Seborg, R. M. (1941). Resin treated laminated, compressed wood (Compreg). (Gen. Tech. Rep. FPL 1381). USDA, Forest Service, Forest Products Laboratory.
31. Stamm, A. J, Burr, H. K. & Kline, A. A. (1946). Staybwood. Heat stabilised wood. Industrial and Engineering Chemistry, 38, 630-634.
32. Tanahashi, M. (1990). Characterization and degradation mechanisms of wood components by steam explosion and utilisation of exploded wood. Wood Research, 77, 49-117.
33. Vorreiter, L. (1949). Holztechnologisches Handbuch, Band I. Vienna: Verlag George Fromme.
34. Wiklund, M. (1993). Value activation- -New sawing patterns give improved properties on wooden products. In Proceedings from the 11th International Wood Machining Seminar, Honne, Norway.