Microstructural evolution in friction stir welding of high-strength linepipe steel

Materials and Design

Volumn 34, Issue , 2012, Pages 258-267

  Cho, Hoon Hwe ^a   Kang, Suk Hoon ^b   Kim, Sung Hwan ^a   Oh, Kyu Hwan ^a   Kim, Heung Ju ^c   Chang, Woong Seong ^c   Han, Heung Nam ^a  

^a Seoul National University   (South Korea)

^b Korea Atomic Energy Research Institute   (South Korea)

^c Research Institute of Industrial Science and Technology (RIST)   (South Korea)

Author keywords

Ferrous metals and alloys; Microstructure; Welding

Indexed keywords

BAINITIC FERRITE; COMPLEX PROCESSES; CONTINUOUS DYNAMIC RECRYSTALLIZATION; FERROUS METALS AND ALLOYS; FINE-GRAINED MICROSTRUCTURE; GRAIN STRUCTURES; HIGH-STRENGTH; LINEPIPE STEEL; LOW ANGLE BOUNDARIES; PHASE TRANSFORMATION; SHEAR TEXTURE; STIR ZONES; THERMOMECHANICALLY AFFECTED ZONES;

BAINITE; BAINITIC TRANSFORMATIONS; DYNAMIC RECRYSTALLIZATION; FERRITE; FERRITES; FRICTION; GAS WELDING; HIGH STRENGTH ALLOYS; HIGH STRENGTH STEEL; METALLURGY; MICROSTRUCTURAL EVOLUTION; MICROSTRUCTURE; STAINLESS STEEL; STEEL PIPE; WELDING;

FRICTION STIR WELDING;

EID: 80052201720     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2011.08.010     Document Type: Article

References (41)

1. Folkhard E. Welding metallurgy of stainless steels 1988, Spring-Verlag, Wien New York. 1st ed.
2. Thomas WM, Nicholas ED, Needham JC, Murch MG, Templesmith P, Dawes CJ. International patent application no. PCT/GB92/02203; GB patent application no. 9125978.8; 1991.
3. Sato Y.S., Kokawa H. Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum. Metall Mater Trans A 2001, 32A:3023-3031.
4. Scialpi A., De Filippis L.A.C., Cavaliere P. Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminum alloy. Mater Des 2007, 28:1124-1129.
5. Steuwer A., Dumont M., Peel M., Preuss M., Withers P.J. The variation of the unstrained lattice parameter in an AA7010 friction stir weld. Acta Mater 2007, 55:4111-4120.
6. Kang S.H., Chung H.-S., Han H.N., Oh K.H., Lee C.G., Kim S.J. Relationship between formability and microstructure of Al alloy sheet locally modified by friction stir processing. Scripta Mater 2007, 57:17-20.
7. Kang S.H., Han H.N., Oh K.H., Cho J.-H., Lee C.G., Kim S-J. Investigation of the material flow and texture evolution in friction-stir welded aluminum alloy. Met Mater Int 2009, 15:1027-1031.
8. Kim D., Badarinarayan H., Ryu I., Kim J.H., Kim C., Okamoto K., et al. Numerical simulation of friction stir spot welding process for aluminum alloys. Met Mater Int 2010, 16:323-332.
9. Li B., Shen Y. The investigation of abnormal particle-coarsening phenomena in friction stir repair weld of 2219-T6 aluminum alloy. Mater Des 2011, 32:3796-3802.
10. Zhang H.J., Liu H.J., Yu L. Microstructure and mechanical properties as a function of rotation speed in underwater friction stir welded aluminum alloy joints. Mater Des 2011, 32:4402-4407.
11. Sato Y.S., Yamanoi H., Kokawa H., Furuhara T. Microstructural evolution of ultrahigh carbon steel during friction stir welding. Scripta Mater 2007, 57:557-560.
12. Bhadeshia H.K.D.H., Debroy T. Critical assessment: friction stir welding of steels. Sci Technol Weld Join 2009, 14:193-196.
13. Cho H-H., Han H.N., Hong S-T., Park J-H., Kwon Y-J., Kim S-H., et al. Microstructural analysis of friction stir welded ferritic stainless steel. Mater Sci Eng A 2011, 528:2889-2894.
14. Sato Y.S., Nelson T.W., Sterling C.J. Recrystallization in type 304L stainless steel during friction stirring. Acta Mater 2005, 53:637-645.
15. Mironov S., Sato Y.S., Kokawa H. Microstructural evolution during friction stir-processing of pure iron. Acta Mater 2008, 56:2602-2614.
16. Han H.N., Lee J.K. A constitutive model for transformation superplasticity under external stress during phase transformation of steels. ISIJ Int 2002, 42:200-205.
17. Han H.N., Lee C.G., Oh C.-S., Lee T.-H., Kim S.-J. A model for deformation behavior and mechanically-induced martensitic transformation of metastable austenitic steel. Acta Mater 2004, 52:5203-5214.
18. Han H.N., Lee J.K., Suh D-W., Kim S-J. Diffusion controlled transformation plasticity of steel under externally applied stress. Philos Mag 2007, 87:159-176.
19. Han H.N., Lee C.G., Suh D.-W., Kim S.-J. A microstructure-based analysis for transformation induced plasticity and mechanically induced martensitic transformation. Mater Sci Eng A 2008, 485:224-233.
20. Han H.N., Oh C.-S., Kim G., Kwon O. Design method for TRIP-aided multiphase steel based on a microstructure-based modelling for transformation-induced plasticity and mechanically induced martensitic transformation. Mater Sci Eng A 2009, 499:462-468.
21. Lee M.-G., Kim S.-J., Han H.N. Crystal plasticity finite element modeling of mechanically induced martensitic transformation (MIMT) in metastable austenite. Int J Plasticity 2010, 26:688-710.
22. Mahoney M., Nelson T.W., Sorenson C., Packer S. Friction stir welding of ferrous alloys: current status. Mater Sci Forum 2010, 638:41-46.
23. Mishra R.S., Mahoney M.W. Friction stir welding and processing 2007, ASM International, USA. 1st ed.
24. Mironov S., Sato Y.S., Kokawa H. Development of grain structure during friction stir welding of pure titanium. Acta Mater 2009, 57:4519-4528.
25. Suhuddin U.F.H.R., Mironov S., Sato Y.S., Kokawa H., Lee C.W. Grain structure evolution during friction-stir welding of AZ31 magnesium alloy. Acta Mater 2009, 57:5406-5418.
26. Reynolds A.P., Tang W., Gnaupel-Herold T., Prask H. Structure, properties, and residual stress of 304L stainless steel friction stir welds. Scripta Mater 2003, 48:1289-1294.
27. Sato Y.S., Nelson T.W., Sterling C.J., Steel R.J., Pettersson C.-O. Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel. Mater Sci Eng A 2005, 397:376-384.
28. Gourdet S., Montheillet F. A model of continuous dynamic recrystallization. Acta Mater 2003, 51:2685-2699.
29. Schramm R.E., Reed R.P. Stacking fault energies of seven commercial austenitic stainless steels. Metall Mater Trans A 1975, 6A:1345-1351.
30. Vecchio K.S., Hertzberg R.W. The influence of stacking fault energy on ductile fracture micromorphology. J Mater Sci 1988, 23:2220-2224.
31. Thermo-Calc, Version S, Foundation of computational thermodynamics. Stockholm, Sweden: Royal Institute of Technology; 2008.
32. Strangwood M., Bhadeshia H.K.D.H. The mechanism of acicular ferrite formation in steel weld deposits. Adv Weld Technol Sci 1987, 1:209-214.
33. Yang J.R., Bhadeshia H.K.D.H. Thermodynamic of the acicular ferrite transformation in alloy-steel weld deposits. Adv Weld Technol Sci 1987, 1:187-191.
34. Farrar R.A., Harrison P.L. Acicular ferrite in carbon-manganese weld metals: an overview. J Mater Sci 1987, 22:3812-3820.
35. Borrato F., Barbosa R., Yue S., Jonas J.J. Effect of chemical composition on the critical temperatures of microalloyed steels. Thermec-88 1988, 1:383-390.
36. Cho J.-H., Kang S.-H., Han H.N., Oh K.H. Modeling friction stir welding process of aluminum alloys. Met Mater Int 2008, 14:247-258.
37. Prangnell P.B., Heason C.P. Grain structure formation during friction stir welding observed by the 'stop action technique'. Acta Mater 2005, 53:3179-3192.
38. Fonda R.W., Bingert J.F., Colligan K.J. Development of grain structure during friction stir welding. Scripta Mater 2004, 51:243-248.
39. Reynolds A.P., Hood E., Tang W. Texture in friction stir welds of Timetal 21S. Scripta Mater 2005, 52:491-494.
40. Park S.H.C., Sato Y.S., Kokawa H. Basal plane texture and flow pattern in friction stir weld of a magnesium alloy. Metall Mater Trans A 2003, 34A:987-994.
41. Sung H.K., Shin S.Y., Hwang B.C., Lee C.G., Kim N.J., Lee S.H. Effects of alloying elements and the cooling condition on the microstructure, tensile properties, and charpy impact properties of high-strength bainitic steels. Kor J Met Mater 2010, 48:798-806.