Preparation of amorphous Fe-based magnetic powder by water atomization

Powder Technology

Volumn 213, Issue 1, 2011, Pages 36-40

  Liu, Yong ^a   Niu, Sen ^a   Li, Fei ^a   Zhu, Yitian ^a   He, Yuehui ^a  

^a CENTRAL SOUTH UNIVERSITY   (China)

Author keywords

Metallic glass; Powder; Soft magnetic; Water atomization

Indexed keywords

AMORPHOUS POWDERS; CHEMICAL COMPOSITIONS; CONTENT OF FE; CRYSTALLIZATION TEMPERATURE; DENDRITIC PARTICLES; FE-BASED METALLIC GLASS; GAS-ATOMIZED POWDERS; GLASS FORMING ABILITY; HEAT TREATMENT TEMPERATURE; HIGH-CONTENT; MAGNETIC POWDERS; OXYGEN IMPURITY; SOFT MAGNETIC PROPERTIES; SOFT MAGNETICS; SPHERICAL PARTICLE; WATER ATOMIZATION; WATER ATOMIZED POWDERS;

AMORPHOUS SILICON; ATOMIZATION; GLASS; GLASS TRANSITION; INDUSTRIAL APPLICATIONS; MAGNETIC PROPERTIES; METALLIC GLASS; MORPHOLOGY; OXYGEN; POWDERS; SATURATION MAGNETIZATION;

WATER CONTENT;

IRON; OXYGEN;

ARTICLE; CHEMICAL COMPOSITION; CRYSTALLIZATION; DIFFERENTIAL SCANNING CALORIMETRY; GLASS TRANSITION TEMPERATURE; HEAT TREATMENT; MAGNETISM; METALLIC GLASS POWDER; NEBULIZATION; POWDER; SURFACE PROPERTY; THERMOSTABILITY; WATER ATOMIZATION; X RAY DIFFRACTION;

EID: 80052099169     PISSN: 00325910     EISSN: 1873328X     Source Type: Journal    
DOI: 10.1016/j.powtec.2011.06.026     Document Type: Article

References (23)

1. Shen B.L., Koshiba H., Mizushima T., Inoue A. High strength and good soft magnetic properties of bulk glassy Fe-Mo-Ga-P-C-B alloys with high glass-forming ability. Mater. Trans. JIM 2000, 41:873-876.
2. Inoue A., Shen B.L. New Fe-based bulk glassy alloys with high saturated magnetic flux density of 1.4 to 1.5 Tesla. Mater. Sci. Eng. 2004, A375-377:302-306.
3. Hagiwara M., Inoue A., Masumoto T. Mechanical properties of Fe-Si-b amorphous wires produced by in-rotating-water spinning method. Met. Trans. 1982, 13A:373-382.
4. Inoue A., Shinohara Y., Gook J.S. Thermal and magnetic properties of bulk Fe-based glassy alloys prepared by copper mold casting. Mater. Trans. JIM 1995, 36:1427-1433.
5. Liqun Ma, Limin Wang, Tao Zhang, Inoue A. Fe-based metallic glass with significant supercooled liquid region of over 90k. J. Mater. Sci. Lett. 1998, 17:1893-1895.
6. Koshiba H., Inoue A., Makino A. Fe-based soft magnetic amorphous alloys with a wide supercooled liquid region. J. Appl. Phys. 1999, 85:5136-5138.
7. Zhang T., Inoue A. Bulk glassy alloys in (Fe, Co, Ni)-Si-B system. Mater. Tran. 2001, 42:1015-1018.
8. Ponnambalam V., Joseph Poon S., Shiflet Gary J., Keppens Veerle M., Taylor R., Petculescu G. Synthesis of iron-based bulk metallic glasses as nonferromagnetic amorphous steel alloys. Appl. Phys. Lett. 2003, 83:1131-1133.
9. Lu Z.P., Liu C.T., Thompson J.R., Porter W.D. Structural amorphous steels. Phys. Rev. Lett. 2004, 92:245503.
10. Shen J., Chen Q.J., Sun J.F. Exceptionally high glass-forming ability of an FeCoCrMoCBY alloy. Appl. Phys. Lett. 2005, 86:1-3.
11. Mitera M., Masumoto T., Kazama N.S. Effect of silicon addition on the magnetic properties of Fe-B-C amorphous alloys. J. Appl. Phys. 1979, 50:7609-7611.
12. Makino A., Chang C., Kubota T., Inoue A. Soft magnetic Fe-Si-B-P-C bulk metallic glasses without any glass-forming metal elements. J. Alloys Comp. 2009, 483:616-619.
13. Li H.X., Wang S.L., Yi S., Jiao Z.B., Wu Y., Lu Z.P. Glass formation and magnetic properties of Fe-C-Si-B-P-(Cr-Al-Co) bulk metallic glasses fabricated using industrial raw materials. J. Magn. Magn. Mater. 2009, 321:2833-2837.
14. Yagi M., Endo I., Otsuka I., Yamamoto H., Okuno R., Koshimoto H., Shintani A. Magnetic properties of Fe-based amorphous powder cores produced by a hot-pressing method. J. Magn. Magn. Mater. 2000, 215-216:284-287.
15. Endo I., Otsuka I., Okuno R., Shintani A., Yoshino M., Yagi M. Fe-based amorphous soft-magnetic powder produced by spinning water atomization process (SWAP). IEEE Trans. Mag. 1999, 35:3385-3387.
16. He S., Liu Y., Guo S. Cooling rate calculation of non-equilibrium aluminum alloy powders prepared by gas atomization. Rare Metal Mater. Eng. 2009, 38:353-356.
17. Inoue A., Shen B.L. New Fe-based bulk glassy alloys with high saturated magnetic flux density of 1.4-1.5T. Mater. Sci. Eng. 2004, A375-377:302-306.
18. Inoue A., Park R.E. Soft magnetic properties and wide supercooled liquid region of Fe-P-B-Si base amorphous alloys. R.E. Mater. Trans. JIM 1996, 37:1712-1715.
19. Makino A., Inoue A., Mizushima T. Soft magnetic properties of Fe-based bulk amorphous alloys. Mater. Trans. JIM 2000, 41:1471-1477.
20. Powders for soft magnetic sintered parts, Technical Report, Hoganas AB, Brochure PM 92-01, Sweden, 1992.
21. Nishi Y., Watanabe H., Suzuki K., Masumoto T. Viscosities of Fe-C, Fe-P and Fe-P-C Eutectic liquid alloys by a capillary method under reduced pressure. J. Phys. (Paris) 1980, C8:359-362.
22. Li H.X., Gao J.E., Jiao Z.B., Wu Y., Liu Z.P. Glass-forming ability enhanced by proper additions of oxygen in a Fe-based bulk metallic glass. Appl. Phys. Lett. 2009, 95:161905.
23. Che X.Z. Stress relief and magnetism optimization in amorphous Fe79B16Si5 alloy. Acta Metal. Sin. 1995, 31:B418-B422.