Influence of liquid lead and lead-bismuth eutectic on tensile, fatigue and creep properties of ferritic/martensitic and austenitic steels for transmutation systems

Journal of Nuclear Materials

Volumn 415, Issue 3, 2011, Pages 284-292

  Gorse, D ^a   Auger, T ^b   Vogt, J B ^c   Serre, I ^c   Weisenburger, A ^d   Gessi, A ^e   Agostini, P ^e   Fazio, C ^d   Hojna, A ^f   Di Gabriele, F ^f   Van Den Bosch, J ^g   Coen, G ^g   Almazouzi, A ^g   Serrano, M ^h  

^a LABORATOIRE DES SOLIDES IRRADIÉS   (France)

^b ECOLE CENTRALE PARIS   (France)

^c CNRS   (France)

^d KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

^e ENEA   (Italy)

^f Ustav Jaderneho Vyzkumu Rež As ^*  (Czech Republic)

^g BELGIAN NUCLEAR RESEARCH CENTRE   (Belgium)

^h CIEMAT   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITIC; CREEP CONDITIONS; CREEP PROPERTIES; DUCTILITY TROUGH; FERRITIC/MARTENSITIC; LEAD-BISMUTH EUTECTICS; LIQUID LEAD; LIQUID METAL EMBRITTLEMENT; LONG TERM EXPOSURE; LOW OXYGEN; SURFACE STATE; TRANSMUTATION SYSTEMS;

AUSTENITE; BISMUTH; CREEP; DUCTILITY; EUTECTICS; LIQUID METALS; MARTENSITIC STEEL; STAINLESS STEEL;

FERRITIC STEEL;

EID: 80052033811     PISSN: 00223115     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jnucmat.2011.04.047     Document Type: Article

References (62)

1. Handbook on Lead-Bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-Hydraulics and Technologies, OECD, 2007. ISBN:978-92-64-99002-9. < http://www.nea.fr/html/science/reports/2007/ nea6195- handbook.html >.
2. M. Schikorr, E. Ebulis, G. Van den Eynde, L. Mansani, Core Thermal Hydraulics of XT-ADS, Deliverable D1.53, DM1-DESIGN of EC FP6 EUROTRANS Project FI6W-CT-2004-516520.
3. W. Maschek Accelerator driven systems for transmutation: fuel development, design and safety Prog. Nucl. Energy 50 2008 333 340
4. C. Fazio Nucl. Eng. Des. 238 2008 1471 1495
5. R.G. Ballinger, and J. Lim Nucl. Technol. 147 2004 418 434
6. W. Rostoker, J.M. McCaughey, and H. Marcus Embrittlement by Liquid Metals 1960 Reinhold Publishing Corporation New-York
7. M.H. Kamdar Prog. Mater. Sci. 15 1973 289 372
8. V.V. Popovich, and I.G. Dmukhovskaya The embrittlement of metals and alloys being deformed in contact with low-melting alloys Fiz. Khim. Mekh. Mater. 23 6 1987 3
9. F.A. Shunk, and W.R. Warke Scripta Metall. 8 1974 519 526
10. M.G. Nicholas, and C.F. Old J. Mater. Sci. 14 1979 1 18
11. P. Gordon, and H.H. An Metal. Trans. 13A 1982 457 472
12. V.V. Popovich, Mechanisms of liquid metal embrittlement, Sov. Mater. Sci. 15 (1979) 438-445.
13. P.J.L. Fernandez, R.E. Clegg, and D.R.H. Jones Eng. Fail. Anal. 1 1994 51 63
14. E.E. Glickman, Mechanism of liquid metal embrittlement by simple experiments: from atomistic to life time, in: J. Lepinoux et al. (Eds.), Multiscale Phenomena in Plasticity, Kluwer Academic Publishers, Dordrecht, The Netherlands, 2000, pp. 383-401.
15. B. Joseph, M. Picat, and F. Barbier Eur. Phys. J. Appl. Phys. 5 1999 19 31
16. A. Legris, G. Nicaise, J.-B. Vogt, J. Foct, D. Gorse, and D. Vanon Scripta Mater. 43 2000 997 1001
17. G. Nicaise, A. Legris, J.-B. Vogt, and J. Foct J. Nucl. Mater. 296 2001 256 264
18. A. Legris, G. Nicaise, and J.-B. Vogt J. Nucl. Mater. 301 2002 70 76
19. S. Guérin, J-L. Pastol, C. Leroux, D. Gorse, Synergy effect of lbe and hydrogenated helium on resistance to LME of T91 steel grade, J. Nucl. Mater. 318 (2003) 339-347.
20. J.-L. Pastol, S. Guerin, S. Goryachev, D. Gorse, F. Gamaoun, M. Dupeux, V. Ghetta, Resistance to corrosion and embrittlement of T91 steel in stagnant Pb-Bi of eutectic composition, J. Phys. IV 12(Pr8) (2002) 203-216.
21. J. Van den Bosch, D. Sapundjiev, and A. Almazouzi J. Nucl. Mater. 356 2006 237 246
22. D. Sapundjiev J. Nucl. Mater. 356 2006 229 236
23. C. Fazio, and I. Ricapito J. Nucl. Mater. 318 2003 325 332
24. A. Aiello, P. Agostini, G. Benamati, B. Long, and G. Scaddozzo J. Nucl. Mater. 335 2004 217 221
25. T. Auger J. Nucl. Mater. 335 2004 227 231
26. T. Auger, and G. Lorang Scripta Mater. 52 2005 1323 1328
27. F. Di Gabriele, A. Doubková, and A. Hojná J. Nucl. Mater. 376 2008 307 311
28. K. Dalikova, A. Hojná, F. Di Gabriele, Influence of pre-exposition in liquid lead on the mechanical properties of ferritic/martensitic steel T91, Paper Presented at the 5th International Workshop on Materials for HLM-cooled Reactors and Related Technologies, April 20-22, 2009.
29. Y. Dai, B. Long, and F. Gröschel J. Nucl. Mater. 356 2006 222 228
30. Z. Hadjem-Hamouche, T. Auger, and I. Guillot Corros. Sci. 51 2009 2580 2587
31. T. Auger et al., Fracture Mechanics Behaviour of Ferritic/Martensitic and Austenitic Steels in Contact with Liquid Lead or Lead-Bismuth Eutectic for Transmutation Systems, this workshop.
32. E.E. Glickman, and Yu.V. Goryunov Fiz. Khim. Mek. Mater. 14 1978 20 30
33. J.-B. Vogt, A. Verleene, I. Serre, and A. Legris J. Nucl. Mater. 335 2004 222 226
34. J.-B. Vogt, A. Verleene, and I. Serre Eng. Fail. Anal. 14 2007 1185 1193
35. Arnaud Verleene, Comportement en fatigue de l'acier martensitique T91 300 °C dans l'eutectique plomb-bismuth liquide, PhD Thesis, Université des Sciences et Technologies de Lille, 2005.
36. A. Verleene, J.-B. Vogt, I. Serre, and A. Legris Int. J. Fatigue 28 2006 843 851
37. A. Weisenburger, A. Heinzel, C. Fazio, G. Müller, V.G. Markow, and A.D. Kastanov J. Nucl. Mater. 377 2008 261 267
38. D. Kalkhof, and M. Grosse J. Nucl. Mater. 318 2003 143 150
39. Fehmi Gamaoun, Effet de maintiens de longue durée en bain de plomb ou d'eutectique plomb bismuth liquide sur un acier martensitique à 9%Cr, PhD Thesis, Institut National Polytechnique de Grenoble, 2003.
40. F. Gamaoun, M. Dupeux, V. Ghetta, and D. Gorse Sipta Mater. 50 2004 619 623
41. A. Jianu, G. Müller, A. Weisenburger, A. Heinzel, C. Fazio, V.G. Markov, and A.D. Kashtanov J. Nucl. Mater. 394 2009 102 108
42. J. Van den Bosch, A. Almazouzi, Procurement and Characterization of T91 and SS 316L Plates, R-4197, 2005.
43. W.B. Jones, C.R. Hills, and D.H. Polonis Metal. Trans. A 22A 1991 1049 1058
44. B. Long, Z. Tong, F. Gröschel, and Y. Dai J. Nucl. Mater. 377 2008 219 224
45. B. Long, and Y. Dai J. Nucl. Mater. 376 2008 341 345
46. Bin Long, Liquid Lead-Bismuth Embrittlement Effects on Un-irradiated and Irradiated Ferritic/Martensitic Steels for Nuclear Applications, Thse EPFL, N°4355, 2009.
47. I. Serre, and J.-B. Vogt J. Nucl. Mater. 376 2008 330 335
48. J. Fouletier, V. Ghetta, Potentiometric sensors for high temperature liquids in: V. Ghetta et al. (Ed.), Materials Issues for Generation IV Systems: Status, Open Questions and Challenges, Springer, Dordrecht, The Netherlands, 2008, pp. 445-459.
49. J.-L. Courouau J. Nucl. Mater. 335 2004 254 259
50. R. Ganesan, T. Gnanasekaran, and R.S. Srinivasa J. Nucl. Mater. 349 2006 133 149
51. F. Beauchamp et al., Oxygen Control Systems and Impurity Purification in LBE: Learning from DEMETRA Project, this workshop.
52. T. Auger, I. Serre, G. Lorang, Z. Hamouche, D. Gorse, and J.-B. Vogt J. Nucl. Mater. 376 2008 336 340
53. Z. Hadjem-Hamouche, Etude de la fragilisation des aciers T91 et 316L par l'eutectique Plomb-Bismuth liquide, PhD Thesis, Université Paris XII, 2008.
54. J.P. Strizak, J.R. Distefano, P.K. Liaw, and H. Tian J. Nucl. Mater. 296 2001 225 230
55. J-B. Vogt, I. Proriol-Serre, L. Martinelli, K. Ginestar, Reliability in liquid lead-bismuth of the 316L and T91 steels: coupling effects between corrosion and fatigue, in: Proceedings of the International Workshop on Technology and Components of Accelerator Driven Systems - OECD Nuclear Energy Agency, Karlsruhe, Germany, March 15-17 (2010).
56. B. Fournier, M. Sauzay, A. Renault, F. Barcelo, and A. Pineau J. Nucl. Mater. 386-388 2009 71 74
57. G. Müller, A. Heinzel, J. Konys, G. Schumacher, A. Weisenburger, F. Zimmermann, and V. Engelko J. Nucl. Mater. 301 2002 40 46
58. G. Müller, V. Engelko, A. Weisenburger, and A. Heinzel Vacuum 77 2005 469 474
59. G. Müller, Handbook on LBE Technology: Pb and LBE Corrosion Protection at Elevated Temperatures (Chapter 9). <(http://www.nea.fr/html/ science/reports/2007/nea6195-handbook.html)>.
60. G. Diego et al., EC FP5 SPIRE Project FIS5-1999-00223, Deliverable 4, CIEMAT, 2001.
61. Vincent Gaffard, Experimental study and modelling of high temperature creep flow and damage behaviour of 9Cr1Mo-NbV steel weldments, PhD thesis, Ecole Nationale Supérieure des Mines de Paris, 2004.
62. E.M. Haney, F. Dalle, M. Sauzay, L. Vincent, I. Tournié, L. Allais, and B. Fournier Mater. Sci. Eng. A 510-511 2009 99 103