Wireless control system design and co-simulation

Control Engineering Practice

Volumn 19, Issue 9, 2011, Pages 1075-1086

  Björkbom, Mikael ^a   Nethi, Shekar ^a   Eriksson, Lasse M ^a   Jäntti, Riku ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Communication network; Control system design; Performance evaluation; Simulation

Indexed keywords

CO-DESIGNS; COMMUNICATION AND CONTROL; CONTROL SYSTEM DESIGNS; COSIMULATION; NETWORK AND CONTROL; NETWORK QUALITY OF SERVICES; PERFORMANCE EVALUATION; RADIO ENVIRONMENT; SIMULATION; WIRELESS CONTROL; WIRELESS NETWORKED CONTROL SYSTEMS;

ALGORITHMS; COMPUTER NETWORK PERFORMANCE EVALUATION; COMPUTER SIMULATION; CONTROL THEORY; DESIGN; NETWORK PROTOCOLS; QUALITY OF SERVICE; SYSTEMS ANALYSIS; WIRELESS NETWORKS;

QUALITY CONTROL;

EID: 79960891012     PISSN: 09670661     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conengprac.2011.05.012     Document Type: Article

References (37)

1. Al-Hammouri, A., Agrawal, D., Liberatore, V., Al-Omari, H., Al-Qudah, Z., & Branicky, M. S. (2007). Demo abstract: a co-simulation platform for actuator networks. In Proceedings of the 5th international conference on embedded networked sensor systems.
2. Andersson, M., Henriksson, D., Cervin, A. & Årzén, K. -E. (2005). Simulation of wireless networked control systems. In Proceedings of the 44th IEEE conference on decision and control and European control conference (pp. 476-481).
3. Baronti P., Pillai P., Chook V.W.C., Chessa S., Gotta A., Hu Y.F. Wireless sensor networks: A survey on the state of the art and the 802.15.4 and ZigBee standards. Computer Communications 2007, 30(7):1655-1695.
4. Baum L.E., Petrie T., Soules G., Weiss N. A maximization technique occurring in the statistical analysis of probabilistic functions in Markov chains. The Annals of Mathematical Statistics 1970, 41(1):164-171.
5. Biasi, M. De Snickars, C., Landernas, K. & Isaksson, A. J. (2008). Simulation of process control with WirelessHART networks subjected to packet losses. In Proceedings of the 4th IEEE conference on automation science and engineering (pp. 548-553).
6. Björkbom, M. (2010). Wireless control system simulation and network adaptive control. Ph.D. Thesis, Control Engineering series, Report 167, Aalto University, Department of Automation and Systems Technology.
7. Branicky, M. S., Liberatore, V. & Phillips, S. M. (2003). Networked control system co-simulation for co-design. In Proceedings of the American control conference (Vol. 4, pp. 3341-3346).
8. Dust Networks. (2006). Technical overview of time synchronized mesh protocol (TSMP). Dust Networks. Available at: 〈〉. http://www.dustnetworks.com/docs/TSMP_Whitepaper.pdf.
9. Elliott E.O. Estimates of error rates for codes on burst-noise channels. Bell System Technical Journal 1963, 42:1977-1997.
10. Eriksson, L. (2008). PID controller design and tuning in networked control systems. Ph.D. Thesis, Helsinki University of Technology.
11. Eriksson, L., Hölttä, V. & Misol, M. (2006). Modeling, simulation and control of a laboratory-scale trolley crane. In Proceedings of the 47th conference on simulation and modelling.
12. Gilbert E.N. Capacity of a burst-noise channel. Bell System Technical Journal 1960, 39:1253-1265.
13. Gungor V.C., Hancke G.P. Industrial wireless sensor networks: challenges, design principles, and technical approaches. IEEE Transactions on Industrial Electronics 2009, 56(10).
14. Hasan, M. S., Yu, H., Griffiths, A. & Yang, T. C. (2008). Co-simulation framework for networked control systems over multi-hop mobile ad-hoc networks. In Proceedings of the 17th international federation of automatic control world congress (pp. 12552-12557).
15. Henriksson, D., Cervin, A. & Årzén, K. -E. (2002). TrueTime: simulation of control loops under shared computer resources. In Proceedings of the 15th IFAC world congress on automatic control.
16. Hespanha J., Naghshtabrizi P., Xu Y. A survey of recent results in networked control systems. Proceedings of the IEEE 2007, 95(1):138-162.
17. Kao C.-Y., Lincoln B. Simple stability criteria for systems with time-varying delays. Automatica 2004, 40:1429-1434.
18. Kohtamäki, T., Pohjola, M., Brand, J. & Eriksson, L. M. (2009). PiccSIM toolchain-Design, simulation and automatic implementation of wireless networked control systems. In Proceedings of the IEEE international conference on networking, sensing and control.
19. Kotz, D., Newport, C., Gray, R. S., Liu, J., Yuan, Y. & Elliott C. (2004). Experimental evaluation of wireless simulation assumptions. In Proceedings of the 7th ACM international symposium on modeling, analysis and simulation of wireless and mobile systems.
20. Lian F.-L., Moyne J., Tilbury D. Network design consideration for distributed control systems. IEEE Transactions on Control Systems Technology 2002, 10(2):297-307.
21. Liu X., Goldsmith A. Cross-layer design of distributed control over wireless networks. Systems and control: Foundations and applications 2005, Birkhauser.
22. Lucio G.F., Paredes-Farrera M., Jammeh E., Fleury M., Reed M.J. OPNET modeler and ns-2: Comparing the accuracy of network simulators for packet-level analysis using a network testbed. WSEAS Transactions on Computers 2003, 2(3):700-707.
23. Montestruque L.A., Antsaklis P.J. On the model-based control of networked systems. Automatica 2003, 39(10):1837-1843.
24. Nethi, S., Pohjola, M., Eriksson, L., & Jäntti, R. (2007a). Platform for emulating networked control systems in laboratory environments. In Proceedings of the 8th international symposium on a world of wireless, mobile and multimedia networks.
25. Nethi, S., Pohjola, M., Eriksson, L., & Jäntti, R. (2007b). Simulation case studies of wireless networked control systems. In Proceedings of the 10th ACM/IEEE international symposium on modelling, analysis and simulation of wireless and mobile systems.
26. Neumann P. Communication in industrial automation-What is going on?. Control Engineering Practice, Special Issue on Manufacturing Plant Control: Challenges and Issues-INCOM 2004 2007, 15(11):1332-1347.
27. Nixon, M., Chen, D., Blevins, T. & Mok, A. K. (2008). Meeting control performance over a wireless mesh network. In Proceedings of the 4th IEEE conference on automation science and engineering (pp. 540-547).
28. Pickholtz R.L., Milstein L.B., Schilling D.L. Spread spectrum for mobile communications. IEEE Transactions on Vehicular Technology 1991, 40(2):313-322.
29. Pohjola, M., Nethi, S. & Jäntti, R. (2009). Wireless control of multihop mobile robot squad. IEEE wireless communications, special issue on wireless communications in networked robotics, February.
30. Reddy, D., Riley, G. F., Larish, B. & Chen Y. (2006). Measuring and explaining differences in wireless simulation models. In Proceedings of the 14th IEEE international symposium on modeling, analysis, and simulation, computer and telecommunication systems.
31. Song, J., Han, S., Mok, A. K., Chen, D., Lucas, M., Nixon, M. & et al. (2008). WirelessHART: applying wireless technology in real-time industrial process control. In Proceedings of the 14th IEEE real-time and embedded technology and applications symposium (pp. 377-386).
32. Song, Y.-Q. (2009). Networked control systems: from independent designs of the network QoS and the control to the co-design. In Proceedings of the 8th IFAC international conference on fieldbuses and networks in industrial and embedded systems.
33. Tipsuwan Y., Chow M.-Y. Control methodologies in networked control systems. Control Engineering Practice 2003, 11:1099-1111.
34. Werb, J., Newman, M., Berry, M., Lamb, S., Sexton, D., & Lapinski, M. (2005). Improved quality of service in IEEE 802.15.4 mesh networks. In Proceedings of the international workshop on wireless and industrial automation.
35. Willig A. Recent and emerging topics in wireless industrial communications: A selection. IEEE Transactions of Industrial Informatics 2008, 4(2).
36. Willig, A., & Mitschke, R. (2006). Result of bit error measurements with sensor nodes and casuistic consequences for the design of energy-efficient error control schemes. In Proceedings of the 3rd European workshop on sensor networks. Lecture notes in computer science (Vol. 3868, pp. 310-325). Berlin/Heidelberg: Springer.
37. Zhang L., Shi Y., Chen T., Huang B. A new method for stabilization of networked control systems with random delays. IEEE Transactions on Automatic Control 2005, 50(8):1177-1181.