Polypropylene/high impact polystyrene blend nanocomposites obtained from E-waste: Evaluation of mechanical, thermal and morphological properties

International Journal of Plastics Technology

Volumn 15, Issue 1, 2011, Pages 46-60

  Mural, Prasanna K S ^a   Mohanty, Smita ^a   Nayak, Sanjay K ^a   Anbudayanidhi, S ^a  

^a CENTRAL INSTITUTE OF PLASTICS ENGINEERING AND TECHNOLOGY   (India)

Author keywords

E waste; Nanocomposites; Recycled blends; Styrene ethylene butadiene styrene

Indexed keywords

AVERAGE PARTICLE SIZE; BASAL SPACING; BATCH MIXERS; BIPHASE; BLEND COMPOSITION; BLEND RATIOS; DSC AND TGA; E-WASTE; HIGH IMPACT POLYSTYRENE; INTERCALATED STRUCTURES; MECHANICAL PERFORMANCE; MECHANICAL RECYCLING; MECHANICAL TESTS; MORPHOLOGICAL PROPERTIES; POLYSTYRENE BLENDS; POST-CONSUMER; RECYCLED BLENDS; STYRENE-ETHYLENE-BUTADIENE-STYRENE;

BLOCK COPOLYMERS; BOND (MASONRY); BUTADIENE; DIFFRACTION; ETHYLENE; IMPACT STRENGTH; NANOCOMPOSITES; OPTIMIZATION; POLYSTYRENES; RECYCLING; SCANNING ELECTRON MICROSCOPY; STYRENE; THERMODYNAMIC PROPERTIES; WASTES; X RAY DIFFRACTION;

MECHANICAL PROPERTIES;

EID: 79960800892     PISSN: 0972656X     EISSN: 0975072X     Source Type: Journal    
DOI: 10.1007/s12588-011-9005-1     Document Type: Article

References (31)

1. Hilty LM, Behrendt S, Binswanger M, Bruinink A, Erdmann L, Froehlich J (2005) The Precautionary Principle in the Information Society-Effects of Pervasive Computing on Health and Environment. II revised edition. Swiss Center for Technology Assessment (TA-SWISS), Bern, Switzerland (TA46e/2005), and the Scientific Technology Options Assessment at the European Parliament (STOA 125 EN).
2. Oertel B, Wölk M, Hilty LM, Köhler A (2005) Risks and opportunities of the use of RFID systems, Bundesamt für Sicherheit in der In., Bonn.
3. Wilkinson S, Duffy N, Crowe M, Nolan K (2001) Waste from electrical & electronic equipment. Environmental Protection Agency, Ireland.
4. The Economist, Berlin Economist Office, 56 (2005).
5. Herat S (2007) Clean 35: 305.
6. Widmer R, Oswald-Krapf H, Sinha-Khetriwal D, Schnellmann M, Boüni H (2005) Environ Impact Assess Rev 25: 436.
7. National Safety Council, Electronic product recovery and recycling baseline report (1999).
8. Puckett J, Smith T (2002) Exporting harm: the high-tech trashing of Asia: The Basel Action Network. Seattle7 Silicon Valley Toxics Coalition.
9. Realff MJ, Raymond M, Ammons J (2004) Mater Tod 7(1).
10. Fortelny I, Michalkova D, Mikesova J (1996) J Appl Polym Sci 59: 155.
11. Hork Z, Fort V, Hlavata D, Lednicky F, Vecerka F (1996) Polymer 37: 65.
12. Ha CS, Park HD, Cho WJ (2000) J Appl Polym Sci 76: 1048.
13. Me'lo T, Carvalho L, Calumby R, Brito K, D'Almeida J, Spieth E (2000) Poli{dotless}'meros Ciencia e Tecnologia 10: 82.
14. Ajji A (2002) In: Utracki LA (ed) Polymer blends handbook. Kluwer Academic Press, Dordrecht, Chapter 4.
15. Park HD, Park KP, Cho WJ, Ha' CS, Kwon SK (1996) Polym Recycl 2: 277.
16. Fortelny I, Lkova DM, Dkova JH, Lednicky F (2001) J Appl Polym Sci 81: 570.
17. Brown SB (2002) In: Utracki LA (ed) Polymer blends handbook. Kluwer Academic Press, Dordrecht, Chapter 5.
18. Machado JM, Lee CS (1994) Polym Eng Sci 34: 59.
19. Kwei TK, Frisch HC, Radigan W, Vogel S (1977) Macromolecules 10: 1570.
20. Locke CE, Paul DR (1973) J Appl Polym Sci 17: 2597.
21. Radonjic M, Smit V (1998) J Appl Polym Sci 69: 2625.
22. Hora'k Z, Fort V, Hlavata' D, Lednicky F, Vecerka F (1996) Polymer 37: 65.
23. Zhu SM, Liu Y, Rafailovich M, Sokolov J, Gersappe D, Winesett DA, Ade H (1999) Abstr Pap ACS 218: 109.
24. Ruth M, Santana C, Manrich S (2003) J Appl Polym Sci 88: 2861.
25. Ruth M, Santana C, Manrich S (2003) J Appl Polym Sci 87: 747.
26. Ray SS, Bousmina M (2007) Role of organically modified layered silicate both as an active interfacial modifier and nanofiller for immiscible polymer blends Salvador, Brazil PP-23, P12-033, May 27-31.
27. Liu X, Wu Q (2001) Polymer 42: 10013.
28. Jansseune J, Mewis P, Moldenaers M, Minale P, Maffettone L (2000) J NonNewt Flu Mech 93: 153.
29. Plochocki AP, Dagli SS, Andrews RD (1990) Polym Eng Sci 30: 741.
30. Bucknall CB (1977) Toughened plastics. Applied Science Publishers, London.
31. Sanchez-Olivares G, Sanchez-Solis A, Camino G, Manero O (2008) Expr Polym Lett 2: 569.