Use of inkjet printing to deposit magnesium chloride salt patterns for investigation of atmospheric corrosion of 304 stainless steel

Corrosion Science

Volumn 53, Issue 10, 2011, Pages 3114-3121

  Mi, Na ^a   Ghahari, Majid ^a   Rayment, Trevor ^a,b   Davenport, Alison J ^a  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^b DIAMOND LIGHT SOURCE LTD   (United Kingdom)

Author keywords

A. Stainless steel; C. Atmospheric corrosion

Indexed keywords

304 STAINLESS STEEL; A. STAINLESS STEEL; C. ATMOSPHERIC CORROSION; MAGNESIUM CHLORIDES; OHMIC DROP; SALT DEPOSITION;

ATMOSPHERIC CORROSION; CHLORINE COMPOUNDS; CORROSION RESISTANT ALLOYS; DEPOSITS; HYDRATION; INK; INK JET PRINTERS; INK JET PRINTING; MAGNESIUM; MAGNESIUM PRINTING PLATES;

STAINLESS STEEL;

EID: 79960717206     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2011.05.055     Document Type: Article

References (32)

1. Leckie H.P., Uhlig H.H. Environmental factors affecting critical potential for pitting in 18-8 stainless steel. J. Electrochem. Soc. 1966, 113:1262.
2. Chen Z.Y., Kelly R.G. An analytical modeling method for calculating the maximum cathode current deliverable by a circular cathode under atmospheric exposure. Simulation of Electrochemical Processes II 2007, 33-41. Wit Press/Computational Mechanics Publications, Southampton. V.G. DeGiorgi, C.A. Brebbia, R.A. Adey (Eds.).
3. Nishikata A., Ichihara Y., Hayashi Y., Tsuru T. Influence of electrolyte layer thickness and pH on the initial stage of the atmospheric corrosion of iron. J. Electrochem. Soc. 1997, 144:1244-1252.
4. Cui F.S., Presuel-Moreno F.J., Kelly R.G. Computational modeling of cathodic limitations on localized corrosion of wetted SS 316L at room temperature. Corros. Sci. 2005, 47:2987-3005.
5. Stratmann M. The atmospheric corrosion of iron - A discussion of the physicochemical fundamentals of this omnipresent corrosion process - Invited review. Ber. Bunsen-Ges. Phys. Chem. Chem. Phys. 1990, 94:626-639.
6. Stratmann M., Streckel H. On the atmospheric corrosion of metals which are covered with thin electrolyte layers. 1. Verification of the experimental-technique. Corros. Sci. 1990, 30:681-696.
7. Tomashov N.D., Chernova G.P., Marcova O.N. Effect of supplementary alloying elements on pitting corrosion susceptibility of 18Cr-14Ni stainless steel. Corrosion 1964, 20:T166.
8. Laycock N.J., Newman R.C. Localised dissolution kinetics, salt films and pitting potentials. Corros. Sci. 1997, 39:1771-1790.
9. Pistorius P.C., Burstein G.T. Metastable pitting corrosion of stainless-steel and the transition to stability. Philos. Trans. R. Soc. London Ser. A-Math. Phys. Eng. Sci. 1992, 341:531-559.
10. Cole I.S., Lau D., Paterson D.A. Holistic model for atmospheric corrosion - Part 6 - From wet aerosol to salt deposit. Corros. Eng., Sci. Technol. 2004, 39:209-218.
11. Chen Z.Y., Zakipour S., Persson D., Leygraf C. Effect of sodium chloride particles on the atmospheric corrosion of pure copper. Corrosion 2004, 60:479-491.
12. Chen Z.Y., Persson D., Nazarov A., Zakipour S., Thierry D., Leygraf C. In situ studies of the effect of CO2 on the initial NaCl-induced atmospheric corrosion of copper. J. Electrochem. Soc. 2005, 152:B342-B351.
13. Zhang J., Wang J., Wang Y. Micro-droplets formation during the deliquescence of salt particles in atmosphere. Corrosion 2005, 61:1167-1172.
14. Li S.X., Hihara L.H. Atmospheric corrosion initiation on steel from predeposited NaCl salt particles in high humidity atmospheres. Corros. Eng., Sci. Technol. 2010, 45:49-56.
15. Lobnig R., Sinclair J.D., Unger M., Stratmann M. Mechanism of atmospheric corrosion of copper in the presence of ammonium sulfate particles - Effect of surface particle concentration. J. Electrochem. Soc. 2003, 150:A835-A849.
16. Tsuru T., Tamiya K.I., Nishikata A. Formation and growth of micro-droplets during the initial stage of atmospheric corrosion. Electrochim. Acta 2004, 49:2709-2715.
17. Tsutsumi Y., Nishikata A., Tsuru T. Pitting corrosion mechanism of Type 304 stainless steel under a droplet of chloride solutions. Corros. Sci. 2007, 49:1394-1407.
18. Dubuisson E., Lavie P., Dalard F., Caire J.P., Szunerits S. Study of the atmospheric corrosion of galvanised steel in a micrometric electrolytic droplet. Electrochem. Commun. 2006, 8:911-915.
19. Dubuisson E., Lavie P., Dalard F., Caire J.P., Szunerits S. Corrosion of galvanised steel under an electrolytic drop. Corros. Sci. 2007, 49:910-919.
20. Hastuty S., Nishikata A., Tsuru T. Pitting corrosion of Type 430 stainless steel under chloride solution droplet. Corros. Sci. 2010, 52:2035-2043.
21. Calvert P. Inkjet printing for materials and devices. Chem. Mater. 2001, 13:3299-3305.
22. Sirringhaus H., Shimoda T. Inkjet printing of functional materials. MRS Bull. 2003, 28:802-803.
23. de Gans B.J., Duineveld P.C., Schubert U.S. Inkjet printing of polymers: state of the art and future developments. Adv. Mater. 2004, 16:203-213.
24. Croucher M.D., Hair M.L. Design criteria and future-directions in inkjet ink technology. Ind. Eng. Chem. Res. 1989, 28:1712-1718.
25. Chung J.W., Ko S.W., Bieri N.R., Grigoropoulos C.P., Poulikakos D. Conductor microstructures by laser curing of printed gold nanoparticle ink. Appl. Phys. Lett. 2004, 84:801-803.
26. Lee H.H., Chou K.S., Huang K.C. Inkjet printing of nanosized silver colloids. Nanotechnology 2005, 16:2436-2441.
27. Schindelholz E., Kelly R.G. Application of inkjet printing for depositing salt prior to atmospheric corrosion testing. Electrochem. Solid State Lett. 2010, 13:C29-C31.
28. CRC Handbook of Chemistry and Physics 1994, CRC Press Inc. 75th edition.
29. Prosek T., Iversen A., Taxen C., Thierry D. Low-temperature stress corrosion cracking of stainless steels in the atmosphere in the presence of chloride deposits. Corrosion 2009, 65:105-117.
30. Neufeld A.K., Cole I.S., Bond A.M., Furman S.A. The initiation mechanism of corrosion of zinc by sodium chloride particle deposition. Corros. Sci. 2002, 44:555-572.
31. Maier B., Frankel G.S. Pitting corrosion of bare stainless steel 304 under chloride solution droplets. J. Electrochem. Soc. 2010, 157:C302-C312.
32. Chen Z.Y., Kelly R.G. Computational modeling of bounding conditions for pit size on stainless steel in atmospheric environments. J. Electrochem. Soc. 2010, 157:C69-C78.