An optimized switching strategy for quick dynamic torque control in DTC-hysteresis-based induction machines

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 8, 2011, Pages 3391-3400

  Jidin, Auzani ^a,b   Idris, Nik Rumzi Nik ^b   Yatim, Abdul Halim Mohamed ^b   Sutikno, Tole ^b,c   Elbuluk, Malik E ^d  

^a UNIVERSITI TEKNIKAL MALAYSIA MELAKA   (Malaysia)

^b UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

^c UNIVERSITAS AHMAD DAHLAN   (Indonesia)

^d University of Akron   (United States)

Author keywords

Direct torque control (DTC); dynamic overmodulation; hysteresis controller; induction machine; torque control

Indexed keywords

DIRECT TORQUE CONTROL; DYNAMIC TORQUE CONTROLS; FAST DYNAMICS; HYSTERESIS CONTROLLER; INDUCTION MACHINES; OVERMODULATION; SPACE VECTOR MODULATORS; SWITCHING STRATEGIES; TANGENTIAL COMPONENTS; TORQUE RESPONSE; VOLTAGE VECTORS;

HYSTERESIS; OPTIMIZATION; TORQUE CONTROL; VECTOR SPACES;

TORQUE;

EID: 79960378220     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2087299     Document Type: Article

References (40)

1. I. Takahashi and T. Naguchi, "A new quick-response and highefficiency control strategy of an induction motor," IEEE Trans. Ind. Appl., vol. IA-22, no. 5, pp. 820-827, Sep. 1986. (Pubitemid 17468606)
2. Y. S. Lai and J. H. Chen, "A new approach to direct torque control of induction motor drives for constant inverter switching frequency and torque ripple reduction," IEEE Trans. Energy Convers., vol. 16, no. 3, pp. 220-227, Sep. 2001.
3. L. Romeral, A. Arias, E. Aldabas, and M. G. Jayne, "Novel direct torque control (DTC) scheme with fuzzy adaptive torque-ripple reduction," IEEE Trans. Ind. Electron., vol. 50, no. 3, pp. 487-492, Jun. 2003.
4. N. R. N. Idris and A. H. M. Yatim, "Direct torque control of induction machines with constant switching frequency and reduced torque ripple," IEEE Trans. Ind. Electron., vol. 51, no. 4, pp. 758-767, Aug. 2004.
5. V. Ambrozic, G. S. Buja, and R. Menis, "Band-constrained technique for direct torque control of induction motor," IEEE Trans. Ind. Electron., vol. 51, no. 4, pp. 776-784, Aug. 2004.
6. C. Lascu, I. Boldea, and F. Blaabjerg, "Variable-structure direct torque control-A class of fast and robust controllers for induction machine drives," IEEE Trans. Ind. Electron., vol. 51, no. 4, pp. 785-792, Aug. 2004.
7. C. Lascu and A. M. Trzynadlowski, "A sensorless hybrid DTC drive for high-volume low-cost applications," IEEE Trans. Ind. Electron., vol. 51, no. 5, pp. 1048-1055, Oct. 2004.
8. T. Geyer, G. Papafotiou, and M. Morari, "Model predictive direct torque control-Part I: Concept, algorithm, and analysis," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1894-1905, Jun. 2009.
9. G. Papafotiou, J. Kley, K. G. Papadopoulos, P. Bohren, and M. Morari, "Model predictive direct torque control-Part II: Implementation and experimental evaluation," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1906-1915, Jun. 2009.
10. J. Beerten, J. Verveckken, and J. Driesen, "Predictive direct torque control for flux and torque ripple reduction," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 404-412, Jan. 2010.
11. K. Shyu, J. Lin, V. Pham, T.Wang, andM. Yang, "Global minimum torque ripple design for direct torque control of induction motor drives," IEEE Trans. Ind. Electron., vol. 57, no. 9, pp. 3148-4156, Sep. 2010.
12. M. Cirrincione and M. Pucci, "An MRAS-based sensorless highperformance induction motor drive with a predictive adaptive model," IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 532-551, Apr. 2005. (Pubitemid 40573538)
13. P. Correa, M. Pacas, and J. Rodriguez, "Predictive torque control for inverter-fed induction machines," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1073-1079, Apr. 2007. (Pubitemid 46591027)
14. R. Morales-Caporal and M. Pacas, "A predictive torque control for the synchronous reluctance machine taking into account the magnetic cross saturation," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1161-1167, Apr. 2007. (Pubitemid 46591036)
15. M. Nemec, D. Nedeljkovic, and V. Ambrozic, "Predictive torque control of induction machines using immediate flux control," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2009-2017, Aug. 2007. (Pubitemid 47271274)
16. H. Miranda, P. Cortes, J. I. Yuz, and J. Rodriguez, "Predictive torque control of induction machines based on state-space models," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1916-1924, Jun. 2009.
17. S. Bolognani, L. Peretti, and M. Zigliotto, "Design and implementation of model predictive control for electrical motor drives," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1925-1936, Jun. 2009.
18. F. Barrero,M. R. Arahal, R. Gregor, S. Toral, andM. J. Duran, "A proof of concept study of predictive current control for VSI-driven asymmetrical dual three-phase ac machines," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1937-1954, Jun. 2009.
19. F. Barrero, M. R. Arahal, R. Gregor, S. Toral, and M. J. Duran, "Onestep modulation predictive current control method for the asymmetrical dual three-phase induction machine," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1974-1983, Jun. 2009.
20. F. Morel, X. Lin-Shi, J.-M. Retif, B. Allard, and C. Buttay, "A comparative study of predictive current control schemes for a permanent-magnet synchronous machine drive," IEEE Trans. Ind. Electron., vol. 56, no. 7, pp. 2715-2728, Jul. 2009.
21. M. Pacas and J. Weber, "Predictive direct torque control for the PM synchronous machine," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1350-1356, Oct. 2005. (Pubitemid 41489378)
22. G. Foo and M. F. Rahman, "Sensorless direct torque and flux-controlled IPM synchronous motor drive at very low speed without signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 395-403, Jan. 2010.
23. A. M. Khambadkone and J. Holtz, "Compensated synchronous PI current controller in overmodulation range and six-step operation of space-vectormodulation- based vector-controlled drives," IEEE Trans. Ind. Electron. vol. 49, no. 3, pp. 574-580, Jun. 2002. (Pubitemid 34741898)
24. M. Fu and L. Xu, "A sensorless direct torque control technique for permanent magnet synchronous motors," in Conf. Rec. IEEE IAS Annu. Meeting, 1999, vol. 1, pp. 159-164. (Pubitemid 30544177)
25. D. Casadei, G. Serra, A. Tani, L. Zarri, and F. Profumo, "Performance analysis of a speed-sensorless induction motor drive based on a constantswitching- frequency DTC scheme," IEEE Trans. Ind. Appl., vol. 39, no. 2, pp. 476-484, Mar./Apr. 2003.
26. Y. Xue, X. Xu, T. G. Habetler, and D. M. Divan, "A low cost stator flux oriented source variable speed drive," in Conf. Rec. IEEE IAS Annu. Meeting, 1990, vol. 1, pp. 410-415.
27. C. Lascu, I. Boldea, and F. Blaabjerg, "A modified direct torque control for induction motor sensorless drive," IEEE Trans. Ind. Appl., vol. 36, no. 1, pp. 122-130, Feb. 2000. (Pubitemid 30568867)
28. F. Hoffmann and M. Janecke, "Fast torque control of an IGBT-inverter fed three-phase A.C. drive in the whole speed range-Experimental results," in Proc. 6th Eur. Power Electron. Conf., Sevilla, Spain, 1995, pp. 3.399-3.404.
29. T. Habetler, F. Profumo, M. Pastorelli, and L. Tolbert, "Direct torque control of induction machines using space vector modulation," IEEE Trans. Ind. Appl., vol. 28, no. 5, pp. 1045-1053, Sep./Oct. 1992. (Pubitemid 23555888)
30. T. G. Habetler, F. Profumo, and G. Griva, "Performance evaluation of a direct torque controlled drive in the continuous PWM-square wave transition region," IEEE Trans. Power Electron., vol. 10, no. 4, pp. 464- 471, Jul. 1995.
31. A. Tripathi, A. M. Khambadkone, and S. K. Panda, "Dynamic control of torque in overmodulation and in the field weakening region," IEEE Trans. Power Electron., vol. 21, no. 4, pp. 1091-1098, Jul. 2006. (Pubitemid 44194194)
32. H. Mochikawa, T. Hirose, and T. Umemoto, "Overmodulation of voltage source PWM inverter," in Proc. JIEE Int. Soc. Conf., 1991, pp. 466-471.
33. S. Jul-Ki and S. K. Sul, "A new overmodulation strategy for induction motor drive using space vector PWM," in Proc. IEEE Appl. Power Electron. Conf., Mar. 1995, pp. 211-216.
34. M. Depenbrock, "Direct self control of inverter-fed of induction machine," IEEE Trans. Power Electron., vol. 3, no. 4, pp. 420-429, Oct. 1988.
35. D. W. Chung and S. K. Sul, "A new dynamic overmodulation strategy for high performance torque control of induction motor drives," in Proc. 14th APEC, 1999, vol. 1, pp. 264-270.
36. J. Holtz, W. Lotzkat, and A. Khambadkone, "On continuous control of PWM inverters in the overmodulation range including the six-step mode," IEEE Trans. Power Electron., vol. 8, no. 5, pp. 546-553, Oct. 1993
37. A. M. Hava, S.-K. Sul, R. J. Kerkman, and T. A. Lipo, "Dynamic overmodulation characteristics of triangle intersection PWM methods," IEEE Trans. Ind. Appl., vol. 35, no. 4, pp. 896-907, Jul./Aug. 1999.
38. R. J. Kerkman, T. M. Rowan, D. Leggate, and B. J. Seibel, "Control of PWM voltage inverters in pulse dropping range," IEEE Ind. Appl. Mag., vol. 2, no. 5, pp. 24-31, Sep./Oct. 1996. (Pubitemid 126556092)
39. D. Casadei, G. Serra, and A. Tani, "Analytical investigation of torque and flux ripple in DTC schemes for induction motors," in Proc. IEEE IECON, New Orleans, LA, 1997, pp. 552-556.
40. J. W. Kang and S. K. Sul, "Analysis and prediction of inverter switching frequency in direct torque control of induction machine based on hysteresis bands and machine parameters," IEEE Trans. Ind. Electron., vol. 48, no. 3, pp. 545-553, Jun. 2001.