The three-phase common-mode inductor: Modeling and design issues

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 8, 2011, Pages 3264-3274

  Heldwein, Marcelo Lobo ^a   Dalessandro, Luca ^b   Kolar, Johann W ^c  

^a FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

^b ALSTOMPower Thermal Products Turbogenerators   (Switzerland)

^c ETH ZURICH   (Switzerland)

Author keywords

Choke; common mode (CM); conducted emissions; EMC; inductor; three phase systems

Indexed keywords

CHOKE; COMMONMODE; CONDUCTED EMISSIONS; INDUCTOR; THREE PHASE SYSTEM;

COREMAKING; DESIGN; EQUIVALENT CIRCUITS; MAGNETIC CIRCUITS; MAGNETIC LEAKAGE;

MODELS;

EID: 79960345396     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2089949     Document Type: Article

References (38)

1. E. Zhong and T. A. Lipo, "Improvements in EMCperformance of inverterfed motor drives," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1247-1256, Nov./Dec. 1995.
2. M. L. Heldwein and J. W. Kolar, "Impact of EMC filters on the power density of modern three-phase PWM converters," IEEE Trans. Power Electron., vol. 24, no. 6, pp. 1577-1588, Jun. 2009.
3. M. C. Di Piazza, G. Tine, and G. Vitale, "An improved active commonmode voltage compensation device for induction motor drives," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1823-1834, Apr. 2008. (Pubitemid 351585995)
4. A. F. Moreira, P. M. Santos, T. A. Lipo, and G. Venkataramanan, "Filter networks for long cable drives and their influence on motor voltage distribution and common-mode currents," IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 515-522, Apr. 2005. (Pubitemid 40573536)
5. L. Palma, M. H. Todorovic, and P. N. Enjeti, "Analysis of common-mode voltage in utility-interactive fuel cell power conditioners," IEEE Trans. Ind. Electron., vol. 56, no. 1, pp. 20-27, Jan. 2009.
6. T. Nussbaumer, M. L. Heldwein, and J. W. Kolar, "Differential mode input filter design for a three-phase buck-type PWM rectifier based on modeling of the EMC test receiver," IEEE Trans. Ind. Electron., vol. 53, no. 5, pp. 1649-1661, Oct. 2006. (Pubitemid 44593516)
7. D. R. Bush, "The common-core filter as an electromagnetic interferencesuppression device," IBM J. Res. Develop., vol. 15, no. 3, pp. 242-244, May 1971.
8. J. Deng and K. Y. See, "In-circuit characterization of common-mode chokes," IEEE Trans. Electromagn. Compat., vol. 49, no. 2, pp. 451-454, May 2007. (Pubitemid 47018712)
9. H. Ohashi, "Possibility of power electronics paradigm shift with wide band gap semiconductors," Mater. Sci. Forum, vol. 457-460, pt. 1, pp. 21-26, 2004.
10. M. L. Heldwein, H. Ertl, J. Biela, and J. W. Kolar, "Implementation of a transformerless common-mode active filter for offline converter systems," IEEE Trans. Ind. Electron., vol. 57, no. 5, pp. 1772-1786, May 2010.
11. F. E. King, "Baluns as EMC control devices," in Proc. IEEE Int. Symp. Electromagn. Compat., 1970, pp. 53-60.
12. T. H. Herring, "The common mode choke," in Proc. IEEE Int. Symp. Electromagn. Compat., 1970, pp. 45-52.
13. R. D. Rothenberger, C. Rapids, and J. Krauser, "Common mode choke for plural groups of memory array drive-return line pairs," U.S. Patent 3 482 227, Dec. 2, 1969.
14. M. J. Nave, "On modeling the common mode inductor," in Proc. IEEE Int. Symp. Electromagn. Compat., 1991, pp. 452-457.
15. Nanocrystalline Vitroperm EMC Components, Vacuumschmelze (VAC) GmbH Co., Hanau, Germany, 2004.
16. Ferrites and Accessories-Materials, EPCOS AG, Munich, Germany, 2006.
17. MAGNAPERM-High Permeability Toroidal Cores, Metglas, Inc., Conway, SC, 2003.
18. Q. Yu, T. W. Holmes, and K. Naishadham, "RF equivalent circuit modeling of ferrite-core inductors and characterization of core materials," IEEE Trans. Electromagn. Compat., vol. 44, no. 1, pp. 258-262, Feb. 2002. (Pubitemid 34531449)
19. S. Jing and Q. Jiang, "An alternative method to determine the initial permeability of ferrite core using network analyzer," IEEE Trans. Electromagn. Compat., vol. 47, no. 3, pp. 651-657, Aug. 2005.
20. M. Bartoli, A. Reatti, and M. K. Kazimierczuk, "Modelling iron-powder inductors at high frequencies," in Conf. Rec. IEEE IAS Annu. Meeting, 1994, vol. 2, pp. 1225-1232.
21. P. L. Dowell, "Effects of eddy currents in transformer windings," Proc. Inst. Elect. Eng., vol. 113, no. 8, pp. 1387-1394, Aug. 1966.
22. K. de Jager, L. Dalessandro, I. W. Hofsajer, and W. G. Odendaal, "Wave analysis of multilayer absorptive low-pass interconnects," in Proc. IEEE Power Electron. Spec. Conf., 2007, pp. 2121-2127.
23. M. K. Kazimierczuk, High-Frequency Magnetic Components. New York: Wiley, 2009.
24. D. Murthy-Bellur and M. K. Kazimierczuk, "Harmonic winding loss in buck dc-dc converter for discontinuous conduction mode," IET Power Electron., vol. 3, no. 5, pp. 740-754, Sep. 2010.
25. N. Kondrath and M. K. Kazimierczuk, "Inductor winding loss owing to skin and proximity effects including harmonics in non-isolated pulsewidth modulated dc-dc converters operating in continuous conduction mode," IET Power Electron., vol. 3, no. 6, pp. 989-1000, Nov. 2010.
26. H. Sekiya and M. K. Kazimierczuk, "Design of RF-choke inductors using core geometry coefficient," in Proc. Elect. Manuf. Coil Winding Conf., Nashville, TN, 2009, p. 10.
27. M. K. Kazimierczuk and H. Sekiya, "Design of ac resonant inductors using area product method," in Proc. IEEE ECCE, 2009, pp. 994-1001.
28. A. Massarini and M. K. Kazimierczuk, "Self-capacitance of inductors," IEEE Trans. Power Electron., vol. 12, no. 4, pp. 671-676, Jul. 1997. (Pubitemid 127763219)
29. G. Grandi, M. K. Kazimierczuk, A. Massarini, and U. Reggiani, "Stray capacitances of single-layer solenoid air-core inductors," IEEE Trans. Ind. Appl., vol. 35, no. 5, pp. 1162-1168, Sep./Oct. 1999. (Pubitemid 32262092)
30. L. Dalessandro, F. da Silveira Cavalcante, and J. W. Kolar, "Selfcapacitance of high-voltage transformers," IEEE Trans. Power Electron., vol. 22, no. 5, pp. 2081-2092, Sep. 2007.
31. H. Chen, Z. Qian, S. Yang, and C. Wolf, "Finite-element modeling of saturation effect excited by differential-mode current in a commonmode choke," IEEE Trans. Power Electron., vol. 24, no. 3, pp. 873-877, Mar. 2009.
32. A. Carpinteri, Structural Mechanics-A Unified Approach. Oxford, NY: Chapman & Hall, 1997.
33. C. A. Brebbia and A. Carpinteri, Damage and Fracture Mechanics. Boston, MA: Comput. Mech. Publ., 1998.
34. L. Dehong and J. Xanguo, "High frequency model of common mode inductor for EMI analysis based on measurements," in Proc. IEEE Int. Symp. Electromagn. Compat., 2002, pp. 462-465.
35. Powder Cores-Molypermalloy, High Flux, Kool mu-2005/2006 Catalog, Magnetics, Inc., Pittsburgh, PA, 2005.
36. Micrometals Catalog CD-ROM, Micrometals Inc., Anaheim, CA, 2005.
37. M. Bartoli, A. Reatti, and M. K. Kazimierczuk, "Minimum copper and core losses power inductor design," in Conf. Rec. IEEE IAS Annu. Meeting, 1996, vol. 3, pp. 1369-1376.
38. L. M. Escribano, P. Zumel, R. Prieto, J. A. Oliver, and J. A. Cobos, "A very simple analytical approach of thermal modeling for magnetic components," in Proc. IEEE Appl. Power Electron. Conf. Expo., 2005, vol. 3, pp. 1944-1950. (Pubitemid 43861053)