Corrosion inhibition of CuNi10Fe alloy with phenolic acids

Chemical Engineering Communications

Volumn 198, Issue 11, 2011, Pages 1380-1393

  Vrsalovic L ^a   Oguzie, E ^b   Klisskic M ^a   Gudic S ^a  

^a UNIVERSITY OF SPLIT   (Croatia)

^b FEDERAL UNIVERSITY OF TECHNOLOGY   (Nigeria)

Author keywords

Corrosion inhibition; Cu Ni alloys; P hydroxybenzoic acid; Protocatechuic acid

Indexed keywords

ADSORPTION STRUCTURES; CORROSION INHIBITION; CU-NI ALLOYS; ELECTRODE SURFACES; FREUNDLICH ADSORPTION ISOTHERMS; INHIBITING EFFECT; INHIBITION EFFICIENCY; INHIBITOR CONCENTRATION; LINEAR POLARIZATION METHOD; MOLECULAR DYNAMICS SIMULATIONS; NACL SOLUTION; NUMERICAL VALUES; OPEN CIRCUIT POTENTIAL MEASUREMENTS; P-HYDROXYBENZOIC ACID; PHENOLIC ACIDS; PHYSICAL ADSORPTION; POTENTIODYNAMIC POLARIZATION MEASUREMENTS; PROTOCATECHUIC ACID; QUANTUM CHEMICAL COMPUTATIONS;

ADSORPTION; ALLOYS; COPPER ALLOYS; CORROSION PREVENTION; CORROSION RESISTANCE; DISSOLUTION; MOLECULAR DYNAMICS; ORGANIC ACIDS; PHENOLS; POLARIZATION; PRINCIPAL COMPONENT ANALYSIS; QUANTUM CHEMISTRY; SODIUM CHLORIDE;

CORROSION INHIBITORS;

EID: 79960211088     PISSN: 00986445     EISSN: 15635201     Source Type: Journal    
DOI: 10.1080/00986445.2011.560518     Document Type: Article

References (38)

1. Aljinović, Lj., Gudić, S., and Š mith, M. (2000). Inhibition of CuNi10Fe corrosion in seawater by sodium-diethyl-dithiocarbamate: An electrochemical and analytical study, J. Appl. Electrochem., 30(8), 973-979.
2. Badawy, W. A., Ismail, K. M., and Fathi, A. M. (2005). Environmentally safe corrosion inhibition of the Cu-Ni alloys in acidic sulfate solutions, J. Appl. Electrochem., 35, 879-888.
3. Badawy, W. A., Ismail, K. M., and Fathi, A. M. (2006). Corrosion control of Cu-Ni alloys in neutral chloride solutions by amino acids, Electrochim. Acta, 51, 4182-4189.
4. Barber, M. S., McConnell, V. S., and DeCaux, B. S. (2000). Antimicrobial intermediates of the general phenylpropanoid and lignin specific pathways, Phytochemistry, 54, 53-56.
5. Bartley, J., Huynh, N., Bottle, S. E., Flitt, H., Notoya, T., and Schweinsberg, D. P. (2003). Computer simulation of the corrosion inhibition of copper in acidic solution by alkyl esters of 5-carboxybenzotriazole, Corros. Sci., 45, 81-96.
6. Bouyanzer, A., Hammouti, B., and Majidi, L. (2006). Pennyroyal oil from Mentha pulegium as corrosion inhibitor for steel in 1M HCl, Mater. Lett., 60, 2840-2843.
7. Casewit, C. J., Colwell, K. S., and Rappé, A. K. (1992a). Application of universal force field to organic molecules, J. Am. Chem. Soc., 114, 10035-10046.
8. Casewit, C. J., Colwell, K. S., and Rappé, A. K. (1992b). Application of universal force field to main group elements, J. Am. Chem. Soc., 114, 10046-10053.
9. Cruz, J., Pandiyan, T., and García-Ochoa, E. (2005). A new inhibitor for mild carbon steel: Electrochemical and DFT studies, J. Electroanal. Chem., 583, 8-16.
10. Delley, B. J. (1990). An all-electron numerical method for solving the local density functional for polyatomic molecules, Chem. Phys., 92, 508-518.
11. Delley, B. J. (2000). From molecules to solids with the DMol3 approach, Chem. Phys., 113, 7756-7765.
12. Durnie, W. H. (2004). Modeling the functional behavior of corrosion inhibitors, Paper no. 04401, presented at Corrosion 2004, NACE International, Houston.
13. Fernandez, M. A., Garcia, M. D., and Saenz, M. T. (1996). Antibacterial activity of the phenolic acids fractions of Scrophularia frutescens and Scrophularia sambucifolia, J. Ethnopharmacol., 53, 11-14.
14. Gilbert, P. T. (1995). Copper and copper alloys, in: Corrosion, 3rd ed., eds. L. L. Shreir, R. A. Jarman, and G. T. Burstein, vol. 1, Metal/Environment Reactions, 4:38-4:58, Butterworth-Heinemann, Oxford.
15. Grubač, Z., Babić, R., and Metikoš-Huković, M. (2002). Application of substituted N-arylpyrroles in the corrosion protection of aluminium in hydrochloric acid, J. Appl. Electrochem., 32, 431-438.
16. Hakkinen, S., Heinonen, M., Karenlampi, S., Mykkanen, H., Ruuskanen, J., and Torronen, R. (1999). Screening of selected flavonoids and phenolic acids in 19 berries, Food Res. Int., 32, 345-353.
17. Kamkin, A. N., Davyidov, A. D., Zhou, G.-D., and Marichev, V. A. (1999). Russ. J. Electrochem., 35, 531.
18. Keles, H., Keles, M., Dehri, I., and Serindag, O. (2008). The inhibitive effect of 6-amino-mcresol and its Schiff base on the corrosion of mild steel in 0.5M HCI medium, Mater. Chem. Phys., 112, 173-179.
19. Khaled, K. F., Babic-Samardzija, K., and Hackerman, N. (2005). Theoretical study of the structural effects of polymethylene amines on corrosion inhibition of iron in acid solutions, Electrochim. Acta, 50, 2515-2520.
20. Mabrour, J., Akssira, M., Azzi, M., Zertoubi, M., Saib, N., Messaoudi, A., Albizane, A., and Tahiri, S. (2004). Effect of vegetal tannin on anodic copper dissolution in chloride solutions, Corros. Sci., 46, 1833-1847.
21. Martinez, S., and Stagljar, I. S. (2003). Correlation between the molecular structure and the corrosion inhibition efficiency of chestnut tannin in acidic solutions, J. Mol. Struct. Theochem., 640, 167-174.
22. Mattila, P., and Hellstrom, J. (2007). Phenolic acids in potatoes, vegetables, and some of their products, J. Food Compos. Anal., 20, 152-160.
23. McCafferty, E. (2005). Validation of corrosion rates measured by the Tafel exploration method, Corros. Sci., 47, 3202-3215.
24. Milošev, I., and Metikoš-Huković, M. (1999). Effect of chloride concentration range on the corrosion resistance of Cu-xNi alloys, J. Appl. Electrochem., 29, 393-402.
25. Narvaez, L., Cano, E., and Bastidas, D. M. (2005). 3-Hydroxybenzoic acid as AISI 316L stainless steel corrosion inhibitor in a H2SO4-HF-H2O2 pickling solution, J. Appl. Electrochem., 35, 499-506.
26. Oguzie, E. E. (2005). Inhibition of acid corrosion of mild steel by Telfaria occidentalis extract, Pigm. Resin Technol., 34, 321-326.
27. Parvizi, M. S., Aladjem, A., and Castle J. E. (1988). Behavior of 90-10 cupronickel in seawater, Int. Mater. Rev., 33, 169-200.
28. Pokorny, J., Yanishlieva, N., and Gordon, M. (2001). Antioxidants in Food, Woodhead Publishing, Cambridge.
29. Popova, A., Sokolova, E., Raicheva, S., and Christov, M. (2003). AC and DC study of the temperature effect on mild steel corrosion in acid media in the presence of benzimidazole derivatives, Corros. Sci., 45, 33-58.
30. Radošević, J., Kliškić, M., and Višekruna, A. (2001). Inhibition of corrosion of the Al-2.5Mg alloy by means of the third acidic phenolic subfraction of aqueous extract of rosemary, Kem. Ind., 50, 537-541.
31. Roberge, P. R. (1999). Handbook of Corrosion Engineering, McGraw-Hill, New York.
32. Rodríguez-Valdez, L. M., Martíinez-Villafane, A., and Glossman-Mitnik, D. (2005). Computational simulations of the molecular structure and properties of heterocyclic organic compounds with possible corrosion inhibition properties, J. Mol. Struct. Theochem., 713, 65-70.
33. Rodríguez-Valdez, L. M., Villamisar, W., Casales, M., Gonzalez-Rodriguez, J. G., Martínez-Villafane, A., Martinez, L., and Glossman-Mitnik, D. (2006). Computational simulations of the molecular structure and corrosion properties of amidoethyl, aminoethyl and hydroxyethyl imidazolines inhibitors, Corros. Sci., 48, 4053-4064.
34. Stern, M., and Geary, A. L. (1957). Electrochemical polarization I. A theoretical analysis of the shape of polarization curves, J. Electrochem. Soc., 104, 56-63.
35. Vračar, Lj. M., and Dražić, D. M. (2002). Adsorption and corrosion inhibitive properties of some organic molecules on iron electrode in sulfuric acid, Corros. Sci., 44, 1669-1680.
36. Vrsalović, L., Kliškić, M., Radošević, J., and Gudić, S. (2007). Sinapinic acid as Al 2.5Mg alloy corrosion inhibitor in sodium chloride solution, J. Appl. Electrochem., 37, 325-330.
37. Vrsalović, L., Kliškić, M., and Gudić, S. (2009). Application of phenolic acids in the corrosion protection of Al-0.8Mg alloy in chloride solution, Int. J. Electrochem. Sci., 4, 1568-1582.
38. Zgorka, G., and Glowniak, K. (2001). Variation of free phenolic acids in medicinal plants belonging to the Lamiaceae family, J. Pharm. Biomed., 26, 79-87.