Mechanochemically conjugated PMHS/nano-SiO 2 hybrid and subsequent optimum grafting density study

Applied Surface Science

Volumn 257, Issue 21, 2011, Pages 9024-9032

  Lin, Jinbin ^a   Chen, Hongling ^a   Yuan, Yongbing ^a   Ji, Yan ^a  

^a NANJING TECH UNIVERSITY   (China)

Author keywords

Hybrid particles; Mechanochemical; Surface modification

Indexed keywords

BALL MILLING; COMPLEXATION; CONTACT ANGLE; DISPERSIONS; ELECTRIC CONTACTS; ENAMELS; FIELD EMISSION MICROSCOPES; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GRAFTING (CHEMICAL); HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; LIGHT TRANSMISSION; NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY; PARTICLE SIZE; SCANNING ELECTRON MICROSCOPY; SILICA; SIZE DISTRIBUTION; SURFACE TREATMENT; THERMOANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; VISCOSITY; VISCOSITY MEASUREMENT;

DISPERSION OF NANO PARTICLES; FIELD EMISSION SCANNING ELECTRON MICROSCOPY; FOURIER TRANSFORM INFRA RED (FTIR) SPECTROSCOPY; HIGH-ENERGY BALL MILLING; HYBRID PARTICLES; MECHANOCHEMICALS; POLIES (METHYLHYDROSILOXANE); POLYDIMETHYLSILOXANE PDMS;

PARTICLE SIZE ANALYSIS;

EID: 79960165106     PISSN: 01694332     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apsusc.2011.05.093     Document Type: Article

References (35)

1. R. Matsuno, K. Yamamoto, H. Otsuka, and A. Takahara Polystyrene-grafted magnetite nanoparticles prepared through surface-initiated nitroxyl-mediated radical polymerization Chem. Mater. 15 2003 3 5
2. F. Zhang, H. Zhang, and Z. Su Surface treatment of magnesium hydroxide to improve its dispersion in organic phase by the ultrasonic technique Appl. Surf. Sci. 253 2007 7393 7397 (Pubitemid 46873762)
3. 2 nanoparticles by polyaniline Appl. Surf. Sci. 217 2003 16 22
4. A. Nasu, and Y. Otsubo Rheology and UV protection properties of suspensions of fine titanium dioxides in a silicone oil J. Colloid Interface Sci. 296 2006 558 564
5. L. Dewimille, B. Bresson, and L. Bokobza Synthesis, structure and morphology of poly(dimethylsiloxane) networks filled with in situ generated silica particles Polymer 46 2005 4135 4143 (Pubitemid 40665345)
6. E Jacquelot, J. Galy, J.-F. Gérard, A. Roche, E. Chevet, E. Fouissac, and D. Verchre Morphology and thermo-mechanical properties of new hybrid coatings based on polyester/melamine resin and pyrogenic silica Prog. Org. Coat. 66 2009 86 92
7. 2 /poly(vinyl alcohol) composites by enhanced interaction between nanofiller and matrix Polym. Compos. 31 2010 1184 1193
8. 2 /epoxy resin nanocomposites Polym. Compos. 31 2010 1241 1246
9. D. An, Z. Wang, X. Zhao, Y. Liu, Y. Guo, and S. Ren A new route to synthesis of surface hydrophobic silica with long-chain alcohols in water phase Colloids Surf. A: Physicochem. Eng. Aspects 369 2010 218 222
10. M. Marini, B. Pourabbas, F. Pilati, and P. Fabbri Functionally modified core-shell silica nanoparticles by one-pot synthesis Colloids Surf. A: Physicochem. Eng. Aspects 317 2008 473 481
11. F. Branda, B. Silvestri, G. Luciani, A. Costantini, and F. Tescione Synthesis structure and stability of amino functionalized PEGylated silica nanoparticles Colloids Surf. A: Physicochem. Eng. Aspects 367 2010 12 16
12. Y. Shin, D. Lee, K. Lee, K.H. Ahn, and B. Kim Surface properties of silica nanoparticles modified with polymers for polymer nanocomposite applications J. Ind. Eng. Chem. 14 2008 515 519
13. M. Becuwe, F. Cazier, P. Woisel, D. Landy, and F. Delattre Rapid synthesis of a versatile organic/inorganic hybrid material based on pyrogenic silica J. Colloid Interface Sci. 350 2010 83 89
14. N. Leventis, C. Sotiriou-Leventis, G. Zhang, and A.-M.M. Rawashdeh Nanoengineering strong silica aerogels Nano Lett. 2 2002 957 960 (Pubitemid 135708221)
15. N. Nishizawa, J. Nishimura, H. Saitoh, K. Fujiki, and N. Tsubokawa Grafting of branched polymers onto nano-sized silica surface: postgrafting of polymers with pendant isocyanate groups of polymer chain grafted onto nano-sized silica surface Prog. Org. Coat. 53 2005 306 311 (Pubitemid 40773981)
16. P.P. Greco, F.C. Stedile, and J.H.Z. dos Santos Influence of PMHS loading on the silica surface, on catalyst activity and on properties of resulting polymers J. Mol. Catal. A: Chem. 197 2003 233 243
17. D. Yang, Y. Xu, W. Xu, D. Wu, Y. Sun, and H. Zhu Tuning pore size and hydrophobicity of macroporous hybrid silica films with high optical transmittance by a non-template route J. Mater. Chem. 18 2008 5557 5562
18. F. Bauer, U. Decker, A. Dierdorf, H. Ernst, R. Heller, H. Liebe, and R. Mehnert Preparation of moisture curable polysilazane coatings part I. Elucidation of low temperature curing kinetics by FT-IR spectroscopy Prog. Org. Coat. 53 2005 183 190 (Pubitemid 40710038)
19. R. Wang, and S.L. Wunder Effects of silanol density, distribution, and hydration state of fumed silica on the formation of self-assembled monolayers of n-octadecyltrichlorosilane Langmuir 16 2000 5008 5016
20. C.L Wu, M.Q. Zhang, M.Z. Rong, and K. Friedrich Silica nanoparticles filled polypropylene: effects of particle surface treatment, matrix ductility and particle species on mechanical performance of the composites Compos. Sci. Technol. 65 2005 635 645 (Pubitemid 40077572)
21. J.E. Mark Some novel polymeric nanocomposites Acc. Chem. Res. 39 2006 881 888
22. 2 nanoparticles in aqueous suspension J. Am. Ceram. Soc. 91 2008 2481 2487
23. D. Hua, J. Tang, J. Jiang, Z. Gu, L. Dai, and X. Zhu Controlled grafting modification of silica gel via RAFT polymerization under ultrasonic irradiation Mater. Chem. Phys. 114 2009 402 406
24. M. Bartsch, and G. Schmidt-Naake Application of nitroxide-terminated polymers prepared by sonochemical degradation in the synthesis of block copolymers Macromol. Chem. Phys. 207 2006 209 215 (Pubitemid 43219033)
25. P.D. Castrillo, D. Olmos, D.R. Amador, and J. González-Benito Real dispersion of isolated fumed silica nanoparticles in highly filled PMMA prepared by high energy ball milling J. Colloid Interface Sci. 308 2007 318 324
26. R. Pantaleón, and J. González-Benito Structure and thermostability of PMMA in PMMA/Silica nanocomposites: effect of high-energy ball milling and the amount of the nanofiller Polym. Compos. 31 2010 1585 1592
27. 2 nanoparticles by mechanochemical method based on simple milling Appl. Surf. Sci. 256 2010 5978 5984
28. Y. Hotta, H. Yilmaz, T. Shirai, K. Ohota, K. Sato, and K. Watari State of the dispersant and particle surface during wet-jet milling for preparation of a stable slurry J. Am. Ceram. Soc. 91 2008 1095 1101 (Pubitemid 351474226)
29. R. Hasegawa, Y. Aoki, and M. Doi Optimum graft density for dispersing particles in polymer melts Macromoleculars 29 1996 6656 6662 (Pubitemid 126536633)
30. D.L. Green, and J. Mewis Connecting the wetting and rheological behaviors of poly(dimethylsiloxane)-grafted silica spheres in poly(dimethylsiloxane) melts Langmuir 22 2006 9546 9553 (Pubitemid 44826362)
31. D. Yang, J. Li, Y. Xu, D. Wu, Y. Sun, H. Zhu, and F. Deng Direct formation of hydrophobic silica-based micro/mesoporous hybrids from polymethylhydrosiloxane and tetraethoxysilane Microporous Mesoporous Mater. 95 2006 180 186 (Pubitemid 44397664)
32. F. Bauer, H. Ernst, U. Decker, M. Finde, H.-J. Gläsel, H. Langguth, E. Hartmann, R. Mehnert, and C. Peuker Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles, 1 FTIR and multi-nuclear NMR spectroscopy to the characterization of methacryl grafting Macromol. Chem. Phys. 201 2000 2654 2659
33. 3 nanocomposites Colloids Surf. A: Physicochem. Eng. Aspects 371 2010 1 7
34. 2 Appl. Surf. Sci. 256 2010 1992 1995
35. 2 by thermogravimetric analysis Langmuir 19 2003 160 165