Efficiency modeling of solidification/stabilization of multi-metal contaminated industrial soil using cement and additives

Journal of Hazardous Materials

Volumn 192, Issue 2, 2011, Pages 753-762

  Voglar, Grega E ^a   Leštan, Domen ^b  

^a RDA Regional Development Agency Celje   (Slovenia)

^b UNIVERSITY OF LJUBLJANA   (Slovenia)

Author keywords

Cementitious formulations; Contaminated soil; Potentially toxic metals; Solidification stabilization; Solidification stabilization efficiency model

Indexed keywords

CEMENTITIOUS FORMULATIONS; CONTAMINATED SOILS; SOLIDIFICATION/STABILIZATION; SOLIDIFICATION/STABILIZATION EFFICIENCY MODEL; TOXIC METALS;

CADMIUM; CEMENT ADDITIVES; CONTAMINATION; COPPER; DEIONIZED WATER; EFFICIENCY; GEOLOGIC MODELS; LEACHING; LEAD; MASS TRANSFER; MONOLITHIC INTEGRATED CIRCUITS; PLASTICIZERS; POLYETHYLENE OXIDES; PORTLAND CEMENT; PRINCIPAL COMPONENT ANALYSIS; REMEDIATION; SOIL POLLUTION; SOILS; SOLVENTS; TOXIC MATERIALS; ZINC;

SOIL CEMENT;

AQUEOUS ACRYLIC POLYMER DISPERSION AKRIMAL E; ARSENIC; CADMIUM; CALCIUM ALUMINATE CEMENT; CEMENT; CEMENTOL ANTIKORODIN; COPPER; INDUSTRIAL CHEMICAL; LEAD; NICKEL; ORDINARY PORTLAND CEMENT; PLASTICIZER CEMENTOL DELTA EKSTRA; POLYMER; POLYPROPYLENE FIBER; POLYSORBATE 80; POZZOLANIC CEMENT; PUCULANIC CEMENT; UNCLASSIFIED DRUG;

BROWNFIELD SITE; CEMENT; EFFICIENCY MEASUREMENT; EMPIRICAL ANALYSIS; EQUILIBRIUM; LABORATORY METHOD; LEACHING; MASS TRANSFER; NUMERICAL MODEL; POLYMER; SOIL POLLUTION; SOLIDIFICATION; STABILIZATION; STRENGTH; TOXIC SUBSTANCE;

ARTICLE; CHEMICAL REACTION; DISPERSION; LEACHING; LIMIT OF QUANTITATION; SOIL ANALYSIS; SOIL POLLUTION; SOIL TREATMENT; SOLIDIFICATION AND STABILIZATION;

CONSTRUCTION MATERIALS; METALS; MODELS, THEORETICAL; SOIL POLLUTANTS;

EID: 79960151528     PISSN: 03043894     EISSN: 18733336     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2011.05.089     Document Type: Article

References (44)

1. Zhou Q., Milestone N.B., Hayes M. An alternative to Portland cement for waste encapsulation, the calcium sulfoaluminate cement system. J. Hazard. Mater. 2006, 136:120-129.
2. van der Sloot H.A., van Zomeren A., Meeussen J.C.L., Seignette P., Bleijerveld R. Test method selection, validation against field data, and predictive modelling for impact evaluation of stabilised waste disposal. J. Hazard. Mater. 2007, 141:354-369.
3. Malviya R., Chaudhary R. Factors affecting hazardous waste solidification/stabilization: a review. J. Hazard. Mater. 2006, 137:267-276.
4. Navarro A., Cardellach E., Corbella M. Immobilization of Cu, Pb and Zn in mine-contaminated soils using reactive materials. J. Hazard. Mater. 2011, 186:1576-1585.
5. Gollmann M.A.C., da Silva M.M., Masuero A.B., dos Santos J.H.Z. Stabilization and solidification of Pb in cement matrices. J. Hazard. Mater. 2010, 179:507-514.
6. Chen Q.Y., Tyrer M., Hills C.D., Yang X.M., Carey P. Immobilisation of heavy metal in cement-based solidification/stabilisation: a review. Waste Manage. 2009, 29:390-403.
7. Voglar G.E., Lestan D. Soldification/stabilisation of metals contaminated industrial soil from former Zn smelter in Celje, Slovenia, using cement as a hydraulic binder. J. Hazard. Mater. 2010, 178:926-933.
8. Shi C., Spence R.D. General guidelines for S/S of wastes. Stabilization/Solidification of Hazardous, Radioactive and Mixed Wastes 2005, 7-25. CRC Press, Boca Raton, FL. R.D. Spence, C. Shi (Eds.).
9. Scanferla P., Ferrari G., Pellay R., Ghirardini A.V., Zanetto G., Libralato G. An innovative stabilization/solidification treatment For contaminated soil remediation: demonstration project results. J. Soils Sediments 2009, 9:229-236.
10. Kosson D.S., van der Sloot H.A., Sanchez F., Garrabrants A.C. An integrated framework for evaluating leaching in waste management and utilization of secondary materials. Environ. Eng. Sci. 2002, 19:159-203.
11. EN 197-1, Cement - part 1: composition, specifications and conformity criteria for common cements, 2001.
12. Shi C., Spence R. Designing of cement-based formula for solidification/stabilization of hazardous, radioactive, and mixed wastes. Crit. Rev. Environ. Sci. Technol. 2004, 34:391-417.
13. EN 934-2, Admixtures for concrete, mortar and grout - part 2: concrete admixtures - definitions, requirements, conformity, marking and labelling, 2009.
14. EN 14889-2, Fibres for concrete - part 2: polymer fibres - definitions, specifications and conformity, 2006.
15. EN 1504-1, Products and systems for the protection and repair of concrete structures - definitions, requirements, quality control and evaluation of conformity - part 1: definitions, 2005.
16. EN 1015, Methods of test for mortar for masonry, 2007.
17. EN 196-1, Methods of testing cement - part 1: determination of strength. European Committee of Standardization, 2005.
18. EN 12457-2, Charactersation of waste - leaching - compliance test for leaching of granular waste materials and sludges - part 2: one stage batch test at a liquide to solid ratio of 10L/kg for materials with particle size below 4mm (without or with size reduction), European Committee of Standardization, 2004.
19. Ur.L. RS, No. 34, Decree on burdening of soil with waste spreading, Ljubljana, Slovenia, 2008.
20. US Environmental Protection Agency Test Methods for Evaluation of Solid Waste. Laboratory Manual Physical/Chemical Methods, SW 846, 40 CFR Parts 403 and 503 1995, vol. IA. Office of Solid Waste and Emergency Response (OSWER), Washington, DC. third ed.
21. de Groot G.J., van der Sloot H.A. Determination of leaching characteristics of waste materials leading to enviormental product certification. Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes, second vol., STP 1123 1992, 149-170. ASTM, PA. T.M. Gilliam, C.C. Wiles (Eds.).
22. Chandler A.J., Eighmy T.T., Hartlén J., Hjelmar O., Kosson D.S., Sawell S.E., van der Sloot H.A., Vehlow J. Municipal solid waste incinerator residues. Stud. Environ. Sci. (Amst.) 1997, 67:974-979.
23. Ur.L. RS, No. 68, Decree on the limit input concentration values of dangerous substances and fertilisers in soil, Ljubljana, Slovenia, 1996.
24. Stegemann J.A., Zhou Q. Screening tests for assessing treatability of inorganic industrial wastes by stabilisation/solidification with cement. J. Hazard. Mater. 2009, 161:300-306.
25. Kumpiene J., Lagerkvist A., Maurice C. Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments: a review. Waste Manage. 2008, 28:215-225.
26. Choi W.H., Lee S.R., Park Y.L. Cement based solidification/stabilization of arsenic-contaminated mine tailings. Waste Manage. 2009, 29:1766-1771.
27. Rieuwerts J.S., Thornton I., Farago M.E., Ashmore M.R. Factors influencing metal bioavailability in soils: preliminary investigation for the development of a critical loads approach for metals. Chem. Speciation Bioavailability 1998, 10:61-75.
28. Sparks D.L. Environmental Soil Chemistry 2003, Academic Press, San Diego, CA. second ed.
29. Adriano D.C. Trace elements in terrestrial environments. Biogeochemistry, Bioavailability and Risks of Metals 2001, Springer-Verlag, New York. second ed.
30. Kundu S., Gupta A.K. Immobilization and leaching characteristics of arsenic from cement and/or lime solidified/stabilized spent adsorbent containing arsenic. J. Hazard. Mater. 2008, 153:434-443.
31. Wulfsberg G. Inorganic Chemistry 2000, University Science Books, Sausalito, CA.
32. Sanchez F., Mattus C.H., Morris M.I., Kosson D.S. Use of a new leaching test framework for evaluating alternative treatment processes for Mercury-contaminated soils. Environ. Eng. Sci. 2002, 19:251-269.
33. Dermatas D., Shen G., Chrysochoou M., Grubb D.G., Menounou N., Dutko P. Pb speciation versus TCLP release in army firing range soils. J. Hazard. Mater. 2006, 136:34-46.
34. US Environmental Protection Agency, Waste Leachability: the Need for Review of Current Agency Procedures, EPA-SAB-EEC-COM-99-002, Washington, DC, 1999.
35. Li X.D., Poon C.S., Sun H., Lo I.M.C., Kirk D.W. Heavy metal speciation and leaching behaviors in cement based solidified/stabilized waste materials. J. Hazard. Mater. 2001, 82:215-230.
36. Singh T.S., Pant K.K. Solidification/stabilization of arsenic containing solid wastes using Portland cement, fly ash and polymeric materials. J. Hazard. Mater. 2006, 131:29-36.
37. Nathwani J.S., Phillips C.R. Leachability of Ra-226 from uranium mill tailings consolidated with naturally occurring materials and/or cement: II. Analysis based on mass transport equation. Water Air Soil Pollut. 1980, 14:389-402.
38. Hartley W., Edwards R., Lepp N.W. Arsenic and heavy metal mobility in iron oxide-amended contaminated soils as evaluated by short- and long-term leaching tests. Environ. Pollut. 2004, 131:495-504.
39. Seaman J.C., Hutchison J.M., Jackson B.P., Vulava V.M. In situ treatment of metals in contaminated soils with phytate. J. Environ. Qual. 2003, 32:153-161.
40. Tiruta-Barna L., Imyim A., Barna R. Long-term prediction of the leaching behavior of pollutants from solidified wastes. Adv. Environ. Res. 2004, 8:697-711.
41. Dijkstra J.J., Meeussen J.C.L., Comans R.J. Leaching of heavy metals from conataminated soils: and experimental and modeling study. Environ. Sci. Technol. 2004, 38:4390-4395.
42. Engelsen C.J., van der Sloot H.A., Wibetoe G., Justnes H., Lund W., Stoltenberg-Hansson E. Leaching characterisation and geochemical modelling of minor and trace elements released from recycled concrete aggregates. Cement Concr. Res. 2010, 40:1639-1649.
43. Martens E., Jacques D., Van Gerven T., Wang L., Mallants D. Geochemical modeling of leaching of Ca, Mg, Al, and Pb from cementitious waste forms. Cement Concr. Res. 2010, 40:1298-1305.
44. Hills C.D., Pollard S.J.T. Influence of interferences effect on the mechanical, microstructural and fixation characteristics of cement - solidified hazardous waste forms. J. Hazard. Mater. 1997, 52:171-191.