Modelling of particle deposition and rebound behaviour on ventilation ducting wall using an improved wall model

Indoor and Built Environment

Volumn 20, Issue 3, 2011, Pages 300-312

  Sun, Ke ^a   Lu, Lin ^a   Jiang, Hai ^a  

^a HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

Deposition; Dimensionless deposition velocity; Particle; Particle wall impact model; Rebound; Turbulent duct flow

Indexed keywords

AIR CONDITIONING; ARTICLE; ATMOSPHERIC DEPOSITION; LAGRANGIAN PARTICLE MODEL; MATHEMATICAL MODEL; MODEL; PARTICLE DEPOSITION; PHYSICAL PHENOMENA; PRIORITY JOURNAL; REBOUND BEHAVIOR; TURBULENT FLOW;

EID: 79960112475     PISSN: 1420326X     EISSN: 14230070     Source Type: Journal    
DOI: 10.1177/1420326X11411241     Document Type: Article

References (46)

1. WHO: Air Quality Guidelines for Particulate Matter, Ozone, Nitrogen Dioxide and Sulfur Dioxide: Global Update 2005: Summary of Risk Assessment. Geneva, Switzerland, World Health Organization, 2006.
2. Mohammadyan M., Ashmore MR: Personal exposure and indoor PM2.5 concentrations in an urban population: Indoor Built Environ 2005 ; 14 (3-4). 313-320. (Pubitemid 40834989)
3. Cooke RM, Wilson AM, Tuomisto JT, Morales O., Tainio M., Evans J.: A probabilistic characterization of the relationship between fine particulate matter and mortality: elicitation of European experts: Environ Sci Technol 2007 ; 41 (18). 6598-6605. (Pubitemid 47438006)
4. Aleksandropoulou V., Mitsakou C., Housiadas C., Lazaridis M.: Particulate matter exposure and dose relationships derived from realistic exposure scenarios: Indoor Built Environ 2008 ; 17 (3). 237-246. (Pubitemid 351749092)
5. Zhang Y., Zhao B., Li X.: Perceived particle intensity: an indicator to evaluate indoor particle pollution: Indoor Built Environ 2006 ; 15 (2). 155-164. (Pubitemid 43375599)
6. Khallare PS, Pandey R., Balachandran S.: Characterisation of indoor PM10 in residential areas of Delhi: Indoor Built Environ 2004 ;13(2): 139-147.
7. Anand NK, McFarland AR, Wong FS, Kocmoud CJ: Deposition: Software to calculate particle penetration through aerosol transport systems. Report NUREG/GR-0006, Washington, DC, Nuclear Regulatory Commission, 1993.
8. Niosh: Building Air Quality-A Guide for Building Owners and Facility Managers. Washington, DC, US Environmental Protection Agency, 1991.
9. Zhao B., Zhang Y., Li X., Yang X., Huang D.: Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method: Build Environ 2004 ; 39: 1-8. (Pubitemid 37343369)
10. Zhao B., Li X., Zhang Z.: Numerical study of particle deposition in two differently ventilated rooms: Indoor Built Environ 2004 ; 13: 443-451. (Pubitemid 39664667)
11. Sippola MR, Nazzaroff WW: Experiments measuring particle deposition from fully developed turbulent flow in ventilation ducts: Aerosol Sci Technol 2004 ; 38 (9). 914-925. (Pubitemid 39362730)
12. Zhang Z., Chen Q.: Experimental measurements and numerical simulations of particle transport and distribution in ventilated rooms: Atmos Environ 2006 ; 40: 3396-3408.
13. Gao NP, Niu JL: Modeling particle dispersion and deposition in indoor environments: Atmos Environ 2007 ; 41: 3862-3876. (Pubitemid 46602052)
14. Lu W., Howarth AT: Numerical analysis of indoor aerosol particle deposition and distribution in two-zone ventilation system: Build Environ 1996 ; 31: 41-50. (Pubitemid 126399247)
15. Zhao B., Wu P., Song F., Yan D., Yang X., Li X., Jiang Y.: Numerical simulation of indoor PM distribution over the whole year by zonal model: Indoor Built Environ 2004 ; 13: 453-462. (Pubitemid 39664668)
16. Lai ACK, Chen FZ: Modeling particle deposition and distribution in a chamber with a two-equation Reynolds-averaged Navier-Stokes model: Aerosol Sci 2006 ; 37: 1770-1780.
17. Lai ACK, Chen FZ: Comparison of a new Eulerian model with a modified Lagrangian approach for particle distribution and deposition indoors: Atmos Environ 2007 ; 41: 5249-5256.
18. Zhao B., Wu J.: Particle deposition in indoor environments: Analysis of influencing factors: J Hazardous Mater 2007 ; 147: 439-448. (Pubitemid 47088831)
19. Li A., Ahmadi G.: Deposition of aerosols on surfaces in a turbulent channel flow: Int J Eng Sci 1993 ; 31: 435-451.
20. Zhang Z., Chen Q.: Prediction of particle deposition onto indoor surfaces by CFD with a modified Lagrangian method: Atmos Environ 2009 ; 43: 319-328.
21. Tian ZF, Tu JY, Yeoh GH: Numerical modeling and validation of gas-particle flow in an in-line tube bank: Comput Chem Eng 2007 ; 31: 1064-1072. (Pubitemid 46776831)
22. Tian ZF, Tu JY, Yeoh GH, Yuen RKK: Numerical studies of indoor airflow and particle dispersion by large Eddy simulation: Build Environ 2007 ; 42: 3483-3492. (Pubitemid 46876989)
23. Brach RM, Dunn PF: Macrodynamics of microparticles: Aerosol Sci Technol 1995 ; 23: 51-71.
24. Brach RM, Dunn PF: Models of rebound and capture for oblique microparticle impacts: Aerosol Sci Technol 1998 ; 29: 379-388. (Pubitemid 28487801)
25. Chen Q.: Comparison of different k-ε models for indoor airflow computations: Numer Heat Transfer, Part B, Fundam 1995 ; 28: 353-369.
26. Wolfstein M.: The velocity and temperature distribution of one-dimensional flow with turbulence augmentation and pressure gradient: Int J Heat Mass Transfer 1969 ; 12: 301-318.
27. Chen HC, Patel VC: Near-wall turbulence models for complex flows including separation: AIAA J 1988 ; 26: 641-648. (Pubitemid 18663726)
28. Jongen T.: Simulation and modeling of turbulent incompressible flows. PhD thesis, EPF Lausanne, Lausanne, Switzerland, 1992.
29. Fluent: Fluent 6.3 User's Guide. Lebanon, NH, Fluent Inc., 2006.
30. Morsi SA, Alexander AJ: Investigation of particle trajectories in 2-phase flow systems: J Fluid Mech 1972 ; 55: 193-208.
31. Graham DI, James PW: Turbulent dispersion of particles using eddy interaction models: Int J Multiphase Flow 1996 ; 22: 157-175. (Pubitemid 126402701)
32. Zhang J., Li A.: Study on particle deposition in vertical square ventilation duct flows by different models: Energy Convers Manage 2008 ; 49: 1008-1018. (Pubitemid 351389591)
33. White FM: Fluid Mechanics. 2 nd edn. New York, McGraw-Hill, 1986.
34. Wang J.: Particle behavior in the turbulent boundary layer of a gas-particle flow past a flat plate. PhD dissertation, Lehigh University, 2002.
35. Wang J., Levy EK: Particle motions and distributions in turbulent boundary layer of air-particle flow past a vertical flat plate: Exp Therm Fluid Sci 2003 ; 27: 845-853. (Pubitemid 37144584)
36. Wang J., Levy EK: Particle behavior in the turbulent boundary layer of a dilute gas-particle flow past a flat plate: Exp Therm Fluid Sci 2006 ; 30: 473-483.
37. Liu ZC, Landreth CC, Adrian RJ, Hanratty TJ: High resolution measurement of turbulent structure in a channel with particle image velocimetry: Exp Fluids 1991 ; 10: 301-312. (Pubitemid 21683014)
38. Donald JB, Kotey NA, Tachie MF: The effects of surface roughness on the mean velocity profile in a turbulent boundary layer: J Fluids Eng Trans ASME 2002 ;124(3): 664-670.
39. Klebanoff PS: Characteristics of turbulence in a boundary layer with zero pressure gradient: Natl. Advisory Comm Aeronaut Tech Notes 3178, 1954.
40. Zhang J., Li A.: CFD simulation of particle deposition in a horizontal turbulent duct flow: Chem Eng Res Des 2008 ; 86: 95-106. (Pubitemid 351722792)
41. Uijttewaal WSJ, Oliemans RVA: Particle dispersion and deposition in direct numerical and large eddy simulations of vertical pipe flows: Phys Fluids 1996 ; 8: 2590-2604.
42. Liu BYH, Agarwal JK: Experimental observation of aerosol deposition in turbulent flow: Aerosol Sci 1974 ; 5: 145-155.
43. Sippola MR: Particle deposition in ventilation ducts. PhD dissertation, University of California, Berkeley, CA, USA, 2002.
44. Saffman PG: The lift on a small sphere in a slow shear flow: J Fluid Mech 1965 ; 22: 385-400.
45. Saffman PG: Corrigendum to 'The lift on a small sphere in a slow shear flow': J Fluid Mech 1968 ; 31: 624.
46. Wood NB: The mass transfer of particles and acid vapour to cooled surfaces: J Inst Energ 1981 ; 76: 76-93. (Pubitemid 12463670)