Modal identification of spindle-tool unit in high-speed machining

Mechanical Systems and Signal Processing

Volumn 25, Issue 7, 2011, Pages 2388-2398

  Gagnol, Vincent ^a   Le, Thien Phu ^a   Ray, Pascal ^a  

^a UNIVERSITÉ CLERMONT AUVERGNE   (France)

Author keywords

High speed machining; Modal identification; Rotor dynamics; Spindle

Indexed keywords

ACCURATE ESTIMATION; DAMPING RATIO; DYNAMIC BEHAVIOURS; DYNAMIC PROPERTY; EXPERIMENTAL SETUP; FINITE ELEMENT MODELS; FREQUENCY DOMAIN DECOMPOSITION; FREQUENCY RESPONSE FUNCTION MEASUREMENTS; GOOD CORRELATIONS; HARMONICS COMPONENT; HIGH SPEED MACHINING; HIGH SPEED MILLING; HIGH-SPEED; HIGH-SPEED SPINDLE; INDUSTRIAL ENVIRONMENTS; MACHINING OPERATIONS; MEASURED SIGNALS; MODAL FREQUENCY; MODAL IDENTIFICATION; MODAL PARAMETERS; MODAL PROPERTIES; NUMERICAL MODELS; NUMERICAL RESULTS; PROBABILITY DENSITIES; ROTATING CONDITIONS; ROTATING SPEED; ROTOR DYNAMIC; ROTOR DYNAMICS; SPEED RANGE; SPINDLE; SPINDLE SPEED; SPINDLE-BEARING SYSTEM; STOCHASTIC PROPERTIES; TOOL VIBRATIONS;

DOMAIN DECOMPOSITION METHODS; EXPERIMENTS; FINITE ELEMENT METHOD; FREQUENCY ESTIMATION; FREQUENCY RESPONSE; IDENTIFICATION (CONTROL SYSTEMS); MILLING (MACHINING); MODAL ANALYSIS; NATURAL FREQUENCIES; PROBABILITY DENSITY FUNCTION; ROTATION;

SPEED;

EID: 79960072822     PISSN: 08883270     EISSN: 10961216     Source Type: Journal    
DOI: 10.1016/j.ymssp.2011.02.019     Document Type: Article

References (23)

1. S. Tobias, and W. Fishwick Theory of regenerative machine tool chatter The Engineer 1958
2. J. Tlusty, M. Polacek, The stability of machine tools against self-excited vibrations in machining, in: Proceedings of the ASME International Research in Production Engineering, Pittsburgh, USA, 1963, pp. 465474.
3. H. Merritt Theory of self-excited machine tool chatter Transactions of ASME Journal of Engineering for Industry 87 1965 447 454
4. Y. Altintas, and E. Budak Analytical prediction of stability lobes in milling Annals of the CIRP v.44 1995 357 362
5. M.A. Alfares, and A. Elsharkawy Effects of axial preloading of angular contact ball bearings on the dynamics of a grinding machine spindle system Journal of Materials Processing Technology 136 13 2003 48 59
6. S.A. Spiewak, and T. Nickel Vibration based preload estimation in machine tool spindles International Journal of Machine Tools and Manufacture 41 4 2001 567 588 (Pubitemid 34771343)
7. B. Bossmanns, and J.F. Tu A thermal model for high speed motorized spindles International Journal of Machine Tools and Manufacture 39 9 1999 1345 1366
8. B.R. Jorgensen, and Y.C. Shin Dynamics of spindle-bearing systems at high speeds including cutting load effects Journal of Manufacturing Science and Engineering 120 1998 387 394 (Pubitemid 128652120)
9. H.D. Nelson A finite rotating shaft element using Timoshenko beam theory Journal of Mechanical Design 102 1980 793 803 (Pubitemid 11498729)
10. M. Rantatalo, J. Aidanpa, B. Göransson, and P. Norman Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement International Journal of Machine Tools and Manufacture 47 2007 1034 1045 (Pubitemid 46413700)
11. V. Gagnol, C.B. Bouzgarrou, P. Ray, and C. Barra Stability-based spindle design optimization ASME Journal of Manufacturing Science and Engineering 129 2 2007 407 415 (Pubitemid 46869421)
12. V. Gagnol, C.B. Bouzgarrou, P. Ray, and C. Barra Model-based stability prediction for HSM spindle International Journal of Machine Tool and Manufacture 47 78 2007 1176 1186 (Pubitemid 46413689)
13. J. Shuyun, and Z. Shufei A modeling approach for analysis and improvement of spindle-drawbar-bearing assembly dynamics International Journal of Machine tool and Manufacture 50 1 2010 131 142
14. I. Zaghbany, and V. Songmene Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis International Journal of Machine Tools and Manufacture 49 1213 2009 947 957
15. T. Schmitz, J. Ziegert, and C. Stanislaus A method for predicting chatter stability for systems with speed-dependent spindle dynamics Society of Manufacturing Engineers Technical Paper TPO4PUB182, Transactions of NAMRI/SME 32 2004 17 24
16. K. Tatar, and P. Gren Measurement of milling tool vibrations during cutting using laser vibrometry International Journal of Machine Tools and Manufacture 48 2007 380 387
17. R.P.H. Faassen, N. Van de Wouw, J.A.J. Oosterling, and H. Nijmeijer Prediction of regenerative chatter by modelling and analysis of high-speed milling International Journal of Machine Tools and Manufacture 43 2003 1437 1446
18. B.J. Halkon, and S.J. Rothberg Vibration measurements using continuous scanning laser vibrometry: advanced aspects in rotor applications Mechanical Systems and Signal Processing 20 2006 1286 1299 (Pubitemid 44382419)
19. T.C. Lim Vibration transmission through rolling element bearing, part IIV Journal of Sound and Vibration 139 2 1990 179 199 (Pubitemid 20719353)
20. G. Genta Vibration of structures and machines Practical Aspects 1995 Springer-Verlag
21. M. Lalanne, and G. Ferraris Rotordynamics Prediction in Engineering 2001 Wiley
22. R. Brincker, L. Zhang, P. Andersen, Modal identification from ambient responses using frequency-domain decomposition, in: CD-ROM Proceedings of the 18th IMAC, 2000.
23. T.-P. Le, and P. Argoul Continuous wavelet transform for modal identification using free decay response Journal of Sound and Vibration 277 2004 73 100