Metal dusting - An overview of current literature

NACE - International Corrosion Conference Series

Volumn 2001-March, Issue , 2001, Pages

  Jones, Richard T ^a   Baumert, Kenneth L ^b  

^a Air Products and Chemicals Inc ^*  (United States)

^b AIR PRODUCTS AND CHEMICALS INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON MONOXIDE;

EXPOSED TO; IN-PROCESS; METAL DUSTING;

CORROSION;

EID: 79959943797     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (184)

1. Oxidation Behavior of Engineering Gamma Titanium Aluminide Alloys, Yoshihara, M. Kim Y-W. NACE 2000 Paper No. 244, (2000).
2. Effect of Composition on the Hot Corrosion Resistance of NiAI and (Ni, Pt.) A1, Leyens C., Pint B.A, Wright I.G., NACE 2000 Paper No. 260, (2000).
3. Effect of A1203 and Enamel Coatings on 900°C Oxidation and Hot Corrosion Behaviors of Gamma -TiAI, Tang Z., Wang, F., Wu W., Materials Science & Engineering A276 (2000) pp. 70-75.
4. Application of High Velocity Flame Sprayings for Superheater Tubes in Waste Incinerators, Fukuda Y., Kawahara K., Hosoda T., NACE 2000 Paper No 264.
5. Evaluation of Clad Tubing after 18 years of Service in a Coal-Fired Utility Boiler, Fahrmann M. G., Smith G. D., NACE 2000 Paper No. 232.
6. Laser Cladding of Nickel and Iron Base Alloys on Boiler Waterwall Panels and Tubes, Brennan M. S., Gassmann R. C., NACE 2000 Paper No. 235.
7. Study of Ni3AI-CrTC3 Coating Fabricated by Self-Propagating High-Temperature Synthesis Casting Route, La P.Q., Bai M.W., Xue Q. J., Liu W.M. and Yu L.G.; Materials Science and Technology 16, Jan. 2000, pp. 110-114.
8. The Effect of Temperature and Gas Composition on the Metals Dusting Susceptibility of Various Alloys, Fabiszewski A.S., Watkins W.R., Hoffman J.J., Dean S. W. NACE 2000 Paper No 532.
9. Performance of Alloy 602CA in High Temperature Environments up to 1200°C, Agarwal D.C., Brill U., NACE 2000 Paper No. 521.
10. Alloy Selection for Environments Which Promote Metal Dusting, Baker, B.A., Smith, G.D., NACE 2000 Paper No. 257.
11. Relationship Between Coking and Metal Dusting. Chun, C.M.; Subramanian, S. Mumford, J.D.; Ozekcin, A.; Ramanarayanan, T.A.; Exxon Research and Engineering, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999).
12. Coking by Metal Dusting of Steels. Muller-Lorenz, E.M.; Grabke, H.J. Max-Planck-Institut fur Eisenforschung GmbH, Dusseldorf, Germany, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999)
13. Coke Formation on Ni-Base Alloys Under Metal Dusting Conditions, Straub, S. Krajak, R.; Muller- Lorenz, E.M.; Viefhaus, H.; Grabke, H.J.; Max-Planck-lnstitut fur Eisenforschung, Dusseldorf, Germany, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999). (Abstract only).
14. Metal Dusting in Increased Pressure Environments, M. Maier & J. F. Norton, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J. Figueiredo, J. L. (1999). (Abstract only).
15. Coke Formation in Metal Dusting Experiments. Schmid, B.; Grong, O.; Odegard, R. Materials Science and Electrochemistry NTNU, Trondheim, Norway, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999)
16. Experiences in High Temperature Gas Heaters. Brown Viramontes, R. HYL Technology Division, San Nicolas de los Garze, Mexico, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999). (Abstract only).
17. Apparent Melting of Metal Dust Formed in Hydrocarbon and Hydrogen Atmospheres Over Alloys and Pure Metals. Heyse, J.V., Chevron Research & Technology, Richmond, CA, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999). (Abstract only).
18. Catalytic Coking Caused by Fine Metal Particles. Grabke. H.J., Max-Planck-Institut fur Eisenforschung, Dusseldorf, Germany, Workshop 'Coking and Decoking' University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999). (Abstract only).
19. Local Heavy Carburization of Furnace Tube at High Temperature. Bairamov, A.K. Ali, M.; Bradley, R. AI-Jubail, Kingdom of Saudi Arabia, Workshop 'Coking and Decoking'. University of Porto, Editors: Grabke, H.J.; Figueiredo, J.L. (1999). (Abstract only).
20. Anticoking Coatings for Steam Cracking Application. Broutin, P; Ropital, F. Institut Francais du Petrole, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999). (Abstract only).
21. Operational Experiences with Diffusion Coatings on Steam Cracker Tubes. Ganser, B., NUKEM GmbH; Bayer, G.; Wynns, K.A., Alon Surface Technologies, Inc., Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J. Figueiredo, J. L. (1999)
22. Coatalloy tm- Advanced Anti-Coking Surfaces for Pyrolysis Furnaces. Maharajh, E., Surface Engineered Products, The Westaim Corporation, Workshop 'Coking and Decoking'. University of Porto, editors: Grabke, H.J.; Figueiredo, J.L. (1999). (Abstract only).
23. Studies Concerned with the Metal Dusting of Fe-Cr-Ni Materials, Maier, M.; Norton, J.F. Corrosion 99, Paper No. 75, (1999), pp 1-13.
24. Metal Dusting Behavior of High-Temperature Alloys. Baker, B. A.; Smith, G.D., Special Metals Corporation, Huntington, WV (Preprint).
25. Damage Caused by Oxidation and Carburization at a Valve of a Dehydrating Unit. Brand, Ulrich Jobst; Buhler, Hans-Eugen; Karduck, Peter; Kohler, Stefan; Berghof-Hasselbacher, Ellen; Schutze, Michael. Inst. Eisenhuttenkunde, RWTH, Aachen, D-52056, Germany. Prakt. Metallogr. 36, 8 (1999): pp 406-422.
26. On the Mechanism & Energetics of Boudouard Reaction at FeO(100) Surface:2 CO → C + CO2, Cheng H., Reiser D. B., Dean S., Jr., Catalysis Today 50, (1999): pp. 579-588, .
27. Microprocesses of Coke Formation in Metal Dusting, Q. Wei, E. Pippel, J. Woltersdorf, & Grabke H. J., Mat'ls & Corrosion 50, (1999): pp 628-633.
28. Coking by Metal Dusting of Nickel-Base Alloys, Straub S., Krajak R. & Grabke H. J., Mat'ls & Corrosion 50, (1999): pp. 622-627.
29. Update on the Experience With Alloy 800H, Korkhaus J., Schwarz M., Luyckx G., Lesicki R., Verbruggen L., Unpublished paper given @ 44 th Annual Ammonia Safety Symposium, Paper 5c, Sept. 27-30 (1999), Seattle WA.
30. Catalysis and Non-Equilibrium Thermodynamics: Modem in Situ Studies and New Theoretical Approaches, Parmon V. N., Catalysis Today 51 (1999): pp. 435-456
31. CO2 Reforming of CH4, Bradford M.C.J., Vannice M.A., Catalyst Review Science & Engineering 41, 1 (1999): pp. 1-42.
32. Metal Dusting in the Heat Treating Industry, Kelly J., Rolled Alloys Inc., Stainless Steel World, 1999 Conference in The Hague, Netherlands, Manuscript No. P99039, 6pp
33. Kinetic and Morphological Development of Coke Formation on Heat-Resistant Alloys, Young, D. J., Materials and Corrosion 50, (1999): pp. 675-680.
34. Reactivity of Coke Deposited on Metal Surfaces, Figueiredo, J.L., Materials & Corrosion 50 (1999): pp. 696-699.
35. Coking and Decoking During Methanation & Methane Decomposition on Ni-Cu Supported Catalysts, Tavares, M.T., Aistrup, II. And Bernardo, C.A.A., Materials & Corrosion 50, (1999): pp. 681-685.
36. Kinetics and Mechanism of the Oxidation of Carbon, Grabke, H.J., Materials & Corrosion 50, (1999): pp. 686-688.
37. Operational Experience with Diffusion Coatings on Steam Cracker Tubes, Ganser, B. Wynns, K.A., Kurlekar, A., paper before the European Federation of Corrosion Workshop, "Coking & Decoking" May 1999, Porto, Portugal.
38. Update on the Experiences with Alloy 800H, Korkhaus, J., Schwarz, M., Luycky, G. Lesicki, R., & Verbruggen, L., unpublished paper before the 44 th Annual Safety in Ammonia Plants & Relate Facilities Symposium, Sept. 1999.
39. Damage Caused by Oxidation and Carburization at a Valve of a Dehydrating Unit, Brand, U.B., Buhler, H-E, Karduck, P, Kohler, S. Berghof-Hasselbacher, E., & Schutze, M., Prakt. Metallogr. 36, 8 (1999): pp. 406-422.
40. On the Mechanism & Energetics of Boudouard Reactional FeO (100) Surface: 2CO C + CO2, Cheng, H., Reiser, DB., Dean, Jr. S, Catalysis Today 50, (1999): pp. 579-588.
41. Thermodynamics, Mechanisms, and Kinetics of Metal Dusting. Grabke, H. J. Max-Planck-Institut Eisenforschung G.m.b.H, Duesseldorf, D-40074, Germany. Mater. Corros. 49, 5 (1998): pp 303-308.
42. Role of Alloying Elements in Steels on Metal Dusting. Straub, S; Grabke, H. J. Max-Planck-lnstitut Eisenforschung G.m.b.H., Dusseldorf, D-40074, Germany. Mater. Corros. 49, 5 (1998): pp. 321-327.
43. Best Practices for the Carburization Testing of Alloys, Grabke, H.J., Materials Technology Institute Publication No. 52, (1998).
44. Post-Commissioning Operating Experience at the Mossgas Plant, de Wet, H., Minnie, R.O., Davids, A.J., Ammonia Technical Bulletin, 38 (1998): pp. 64-72.
45. Chromium-Silicon Co-Diffusion Coating, Bayer, G.T., Advanced Materials & Processes, Feb. 1998: pp. 25-28.
46. Metal Dusting of Nickel-Base Alloys Kloewer, J; Grabke, H. J.; Mueiler-Lorenz, E.M. VDM G.m.b.H., Werdohi, D-58778, Germany. Mater. Corros. 49, 5 (1998): pp. 328-329.
47. Metal Dusting of Nickel-Containing Alloys. Baker, B.A.; Smith, G.D., Corrosion 98, Paper 445 (1998): pp. 445/1-13.
48. Comparative Carburization of Heat Resistant Alloys. Milner, R.; Phaneuf, M.W. Corrosion 98, Paper 431, (1998): pp. 431/1-18.
49. Carburization - A High Temperature Corrosion Phenomenon. Grabke, H.J. MTI Publications No. 52 Materials Technology Institute of the Chemical Process Industries, Inc. (1998).
50. Metal Dusting of Nickel-Based Alloys. Grabke, H.J.; Muller-Lorenz, E.M., Max-Planck-Institut fur Eisenforschung, Dusseldorf, Germany; Klower, J., Krupp VDM GmbH, Werdohl, Germany; Agarwal, D.C., Krupp VDM Technologies Corp., Houston, Texas, Materials Performance 37, 7 (1998): pp. 58-63.
51. Metal Dusting of Nickel-Base Alloys. Klower, J.; Grabke, H.J.; Muller-Lorenz, E.M. Materials and Corrosion 49, (1998): pp. 328-329.
52. Materials Experience in Methanol Reforming Units. Baumert, K.L.; and Hoffman, J.J., Air Products and Chemicals, Inc., Allentown, PA, Materials Performance 37, 5 (1998): pp. 60-64.
53. Micro-mechanisms of Metal Dusting on Fe-Base and Ni-Base Alloys. Pippel, E. Woltersdorf, J.; Schneider, R. Materials and Corrosion 49 (1998): pp. 309-316.
54. Protection of High Alloy Steel Against Metal Dusting by Oxide Scales. Grabke, H.J. Muller-Lorenz, E.M. Materials and Corrosion 49 (1998): pp. 317-320.
55. Influence of H2S on Metal Dusting. Schneider, A.; Viefhaus, H; Inden, G.; Grabke, H.J.; Muller- Lorenz, E.M.; Materials and Corrosion 49 (1998): pp. 336-339.
56. Effects of Grain Size, Cold Working, and Surface Finish on the Metal-Dusting Resistance of Steels. Grabke, H.J.; Muller-Lorenz, E.M.; Strauss, S.; Pippel, E. Woltersdorf, J. Oxidation of Metals 50, Nos.3/4 (1998): pp. 241-254.
57. Metal Dusting of 9 20% Cr Steels in Increased Pressure Environments at 560 C, M Maier, J.F. Norton & P.D. Frampton, Mar'Is & Corrosion 49, (1998): pp. 330-335.
58. Post Commissioning Operating Experience at the Mossgas Plant, H. de Wet, R. O. Minnie, A.J. Davids, Ammonia Technical Manual 38 (1998): pp. 64 72.
59. Unexpected Metal Dusting Failure of Waste Heat Boiler Tubes, M. M. James, paper presented at the Materials Technology Institute Conference on Heat Exchanger Reliability, November (1998): Houston TX
60. Mechanisms of Carburization and Metal Dusting- Methods of Protection. Grabke, H. J. Max-Planck- Institut fur Eisenforschung G.m.b.H., Dusseldorf, Germany. Corros. Its Control, Proc. Int. Conf. Corros. (1998), Meeting Date 1997, Volume 1, 89-98. Editor(s): Khanna, A.S.; Totlani, M. K.; Singh, S. K Publisher: Elsevier, Amsterdam, Neth. (Not reviewed)
61. A Metallurgical Approach to Combat Metal Dusting in Reduction Gas Production. Milner, R., Kubota Metal Corporation, Fahramet Division; Presented at NACE 1997 Canadian Region Western Conference and Exposition No. 2 (1997).
62. Metal Dusting and Carburization Resistance of Nickel-Base Alloys, Klower, J. Grabke, H.J., Muller- Lorenze, E.M., Agarwal, D.C., NACE 97 Paper No. 139.
63. Resistance of 9-20%Cr-Steel Against Metal Dusting. Grabke, H.J., Muller-Lorenz, E.M.; Eltester, B.;Lucas, M.; Monceau, D. Steel Research 68, 4 (1997): pp179-185.
64. Microprocesses of Metal Dusting on Nickel and Ni-Base Alloys. Schneider, R. Pippel, E.; Woltersdorf, J.; Straub, S.; Grabke, H.J. Steel Research 68, 7 (1997): pp326-332.
65. Update in Alloy Selection for Ammonia Furnaces. Parks, S.B; Schillmoller, C.M. Ammonia Safety & Related Facilities, Ammonia Technical Manual, Vol. 37, (1997), pp. 220-227
66. Improve Alloy Selection for Ammonia Furnaces, Hydrocarbon Processing, Oct.(1997): pp. 93-97
67. Metal Dusting in Catalytic Reforming Furnace Tubes; Ravestein, M. H.; NACE Corrosion 97, Paper 496
68. Metal Dusting of Nickel-Base Alloys. Grabke, H.J.; Krajak, R.; Muller-Lorenz, E.M.; Straub, S. Materials and Corrosion 47, (1997): pp. 495-504.
69. Alloy Development and Processing Effects for FeA1 Iron Aluminides; An Overview. Maziasz, P. J.;Goodwin, GM.; Alexander, D. J.; Viswanthan, S; Oak Ridge National Laboratory, Oak Ridge, TN, USA. Int. Symp. Nickel Iron Aluminides: Process. Prop., Appl., Proc.Mater. Week '96 (1997), Meeting Date 1996, 157-176. Editor(s): Deevi; Seetharama C. Publisher: ASM International, Materials Park, Ohio. (Not reviewed)
70. Metal Dusting of Stainless Steels. Monceau, D.; Mueller-Lorenz, E.M.; Grabke, H. J. ENSCT, Toulouse, F-31077, Fr. Mater. Sci. Forum (1997): 251-254(Pt. 2, High Temperature Corrosion and Protection of Materials 4, Pt. 2), pp. 665-670
71. Catastrophic Carburization (Metal Dusting) of High-Alloy Steels, Nickel, and Nickel-Based Materials. Strauss, Silke. Dinslaken, Germany. Fortschr.-Ber. VDI, Reihe 5 (1997), 509, 1-96. (Not reviewed)
72. Survey of Worldwide Experience with Metal Dusting. Stahl, Henrik; Thomsen, Soren Gyde;Ammonia Safety & Related Facilities, Ammonia Technical Manual 36, (1996): pp. 180-190.
73. Experience With Metal Dusting in H2/CO/COjH20 Atmosphere. Shibasaki, T. Takemura, K.; Mohri, T; Hashimoto, H. Chiyoda Corp. Yokohama, 221 Japan. Ammonia Plant Safety & Related Facilities 36, (1996): pp. 165-179.
74. Metal Dusting of Fe3A1 and (Fe, Ni)3AI. Straub, S.; Krajak, R.; Palm, M. Grabke, H. J. Max-Planck-Institut Eisenforschung G.m.b.H., Dusseldorf, D-40237, Germany. Mater. Corros. 47, 12, (1996): pp. 701-702.
75. Improve Steam Reformer Performance Hohmann, F.W. Hydrocarbon Processing, March 1996, pp.71-74.
76. Aluminizing Alloys to Increase Service Life in Heat -Treating and Furnace Applications, Bayer, G. T.; Industrial Heating, May 1996
77. Elimination of Carbon Formation in 2ndary Reformer System, R. Murdoch, K. Still, Ammonia Safety & Related Facilities, Ammonia Tech. Manual 36, (1996), pp. 82-92.
78. Simple, Safe & Reliable KRES: First Commercial Application, J. R. LaBlanc, R.V. Schneider, III, K.W. Wright, Ammonia Safety & Related Facilities, Ammonia Tech. Manual, 36, (1996), pp. 38-51.
79. Metal Dusting of Nickel-Base Alloys, H.J. Grabke, R. Krajak, E.M. Muller- Lorenz and S. Straub, Materials and Corrosion 47, (1996): pp. 495-504
80. Gaseous Corrosion of a Heat-Resistant Alloy (Metal Dusting), R.L. Colwell, Handbook of Case histories of Failure Analysis, pp. 351-353
81. Metal Dusting Failures in Methane Reforming Plant. Holland, M.L.; Bruyn, H.J. De. Technical Department, Mossgas (Pry) Ltd., Mossel Bay, 6500, S. Afr. Int. J. Pressure Vessels Piping (1996), 66, 1-3, ( 1996): pp. 125-33.
82. Material Challenges in Ethylene Furnace Service When Entering the 21 st Century. Parks, Steanson B.; Schillmoller, C.M. One Energy Square, Suite 1130, Green & Associates, Inc. Dallas, TX, USA. Proc.- Ethylene Prod. Conf 5, (1996): pp. 564-569.
83. Mechanism of Disintegration During Metal Dusting. Katsman, A.; Klinger, L.Levin, A.; Werber, T. Department Materials Engineering, Haifa, 32000, Israel Des Fundam High Temp. Compos, Intermet, Met.-Ceram. Syst, Proc. Symp. pp.413-20. Editor(s): Lin, Ray Y. Publisher: Minerals, Metals & Materials Society, Warrendale, Pa.
84. Experiences with Alloy 800H in Ammonia Plants. Dejaeger, John. Ammonia Safety & Related Facilities, Ammonia Technical Manual 35, (1995): pp. 134-144.
85. Experience with Metal Dusting in Waste Heat Boilers. Gommans, R.J.; Huurdeman, T.L.; Ammonia Safety & Related Facilities, Ammonia Technical Manual 35, (1995), pp. 145-162.
86. Metal Dusting of Low- and High-Alloy Steels. Grabke, H.J. Corrosion 51, 9 (1995) 711-720.
87. Microprocesses of Metal Dusting on Iron. Pippel, E.; Woltersdorf, J.; Grabke, H.J. Straub, S. Steel Research 66 No. 5 (1995): pp. 217-221.
88. Cyclic Oxidation Plus Carburization of Heat-Resistant Alloys. Harper, M.A.; Young, D.J. Corrosion 51, 3 (1995): pp. 191-200.
89. Effect of Sulfur on the Stability of Cementite. Grabke, H.J.; Muller-Lorenz, E.M. Materials Technology, Steel Research 66 No. 6, (1995): pp. 254-258.
90. Mechanisms of Metal Dusting of Low and High Alloy Steels. Grabke, H. J. Max-Planck-Institut Eisenforschung G.m.b.H., Dusseldorf, D-40237, Germany. Diffus. Defect Data, Pt B (1995), (Diffusion and Reactions), (1995): pp. 3-16.
91. Metal Dusting Phenomenon During Carburization of FeNiCr-Alloys at 850-1000 °. Forseth, S; Kofstad, P. Cent. Mater. Res., Univ. Oslo, Oslo, -0371, Norway. Mater. Corros 46, 4 (1995): pp.201- 6.
92. Microprocesses of Metal Dusting on Iron, E. Pippel, J. Woltersdorf. H.J. Grabke, S. Straub, Steel Research, 66, 5 (1995): pp. 217-221
93. Operational Performance of the ICI Leading Concept Ammonia Process, I.R. Barton, K.J. Elkins, Ammonia Safety & Related Facilities, Ammonia Tech. Manual 35, (1995): pp. 276-290.
94. Carbon Formation & Metal Dusting in Hot Gas Cleanup Systems of Coal Gasifiers, P.F. Tortorelli, R. R. Judkins, J.H. DeVan, I.G. Wright, Proc. Advanced Coal Fired Power Systems, " Review Mtg., June 1995
95. The Metal Dusting Phenomenon, Topsoe and Chiyoda Experiences, Nitrogen, November/December (1995): pp. 43-46
96. Nickel Alloys Combat High-Temperature Corrosion, Agarwal, D.C., Herda, W.R., Brill, U., Advanced Materials & Processes, October 1995, pp. 42-45
97. Innovations in Alloy Metallurgy for Furnace Rolls and Other High Temperature Applications. Agarwal, D.C.; Brill, U.; Kettler, H. W.; Giersbach, G. VDM Technologies, Houston, TX, USA. Heat-Resist. Mater. II, Conf. Proc., 2 nd (1995): pp. 63-66. Editor(s): Natesan, Krishnamurti; Ganesan, P; Lai, G. Y. Publisher: ASM International, Materials Park, Ohio.
98. Metal Dusting-eine Korrosive Aufkohlung. Grabke, H.J. and Krajak, R. HTM 49, 2 (1994) pp. 150 - 156.
99. Morphological Stability of γ /α Interface Formed by Carburization in Fe-C-X Alloys. Ichinose, M;Togashi, F.; lshida, K.; Nishizawa, T Fac. Eng., Tohoku Univ., Sendai, 980, Japan. Metall. Mater.Trans. A 25A, 3 (1994): pp. 531-7.
100. Metal Dusting of Low Alloy Steels. Grabke, J. H.; Bracho-Troconis, C. B. Mueller-Lorenz, E.M. Max-Planck-Institut Eisenforschung G.m.b.H., Dusseldorf, D-40 074, Germany. Werkst. Korros.45, 4 (1994): pp. 215-21.
101. Effect of Oxidizing & Reducing Gas Atmospheres on the Iron-Catalyzed Formation of Filamentous Carbon from Methanol, W.L. Holstein, Industrial & Engineering Chemistry, 33, (1994): pp. 1363- 1372
102. Development & Start-up of Tandem Performing Process, B. J. Grotz, M. Kh. Sosna, I.E. Bonar, B.M. Gunko, Ammonia Safety & Related Facilities, Ammonia Tech. Manual 34, (1994): pp. 74-82.
103. DSM's Experience With Metal Dusting in Waste Heat Boilers, R.J. Gommans, T.L. Huurdeman, AIChE Paper 3b, October 1994, 14 pp. Unpublished
104. Metal Dusting of High-Temperature Alloys. Grabke, H. J.; Krajak, R.; Mueller-Lorenz, E.M. Max- Pianck-Institut Eisenforschung G.m.b.H., Dusseldorf, W-4000/1, Germany. Werkst. Korros 44, 3 (1993): pp. 89-97.
105. Metal Dusting. Nava Paz, J C.; Grabke, H. J. Max-Planck-Institut Eisenforschung G.m.b.H., Dusseldorf, D-4000, Germany. Oxid. Met. 39, 5-6 (1993): pp. 437-56.
106. Coke Formation on Preoxidized Iron and Nickel in a CI-I4-H2 Gas Atmosphere at 1, 000°C. Tokura, S.; Otsuka, N.; Kudo, T. Corrosion 49, 7 (1993): pp. 561-567.
107. On the Mechanism of Catastrophic Carburization: 'Metal Dusting'. Grabke, H.J. Krajak, R.; Nava Paz, J.C. Max-Planck-Institut fur Eisenforschung, Dusseldorf, Germany. Corrosion Science 35, 5-8, (1993): pp1141-1150.
108. Effect of Gasifier Environment on Materials Performance, Bakker, W.T. Elect. Power Res. Inst. Palo Alto, CA, 97303, USA. Mater. High Temp 11 1-4 (1993): pp. 81-9.
109. 108.Gaseous Corrosion of a Heat-Resistant Alloy (Metal Dusting); Colwell, R. L. Handbook of Case Histories of Failure Analysis 1, (1992): pp. 351-353.
110. Effect of Oxide Scale on Carbon Deposition on Fe-Ni Alloys in Carburizing Gas. Ando, S.; Kimura, H. Metallurgical Transactions 22A, October 1991, pp. 2393-2399.
111. Coking Minimization in Olefin Manufacture via Nitridation of Sol Gel-Produced Silica Films, Rapp, R.A., Lannuttii, J.J., Technical Proposal to the MTI, Feb. 26, 1991.
112. Carburization in Coal Gasifier Environments, Bakker, W.T.; Perkins, R.A. Kip, J.B.M. Paper 63 CORROSION 91 (1991) pp. 63/1-63/19.
113. Heat Resistant Alloys. Rolled Alloys publication, 1991.
114. Metallographic Investigations of Cast and Carburized NiCr 80/20 Alloy. Kallfass, Monika; Hoerz, Gerhard. Inst. Werkstoffwiss., Max-Planck-Inst Metallforsch, Stuttgart, W-7000/1, Fed Rep Ger. Prakt. Metallogr 28, 9 (1991 ): pp455-67.
115. High-Temperature Corrosion of Engineering Alloys. Lai, G.Y., Publisher, ASM International (1990).
116. High Resolution Electron Microscopy Study of the Carbon Deposit Morphology on Nickel Catalysts, E. Tracz, R. Scholz, T. Borowiecki, Applied Cayalysis 66, (1990): pp. 133-148
117. Effect of Aluminum Oxide on Carbon Deposition of Fe-A1 Alloys in Carburizing Gas. Ando, S.; Nakayama, Y.; Kimura, H. Univ. of Osaka Prefecture, Osaka, Japan Iron and Steel Institute of Japan International 29, 6 (1989): pp. 511-516.
118. Heat Resistant Alloys, Rolled Alloys Pubn. pp. 2.1, 2.2
119. Effect of Aluminum Oxide on Carbon Deposition of Fe-AI Alloys in Carburizing Gas, S. Ando, Y. Nakayama, H. Kimura, Iron & Steel Institute of Japan 29, 6 (1989), pp. 511-516.
120. A Model to Predict Oxidizing-Carburizing Resistance of Austenitic Stainless Steels as a Function of Alloy Chemistry. Christodoulou, P.; Kokkinoplitis, K. Metall. Ind. Technol. Deve. Cent S.A., Volos, Greece. Adv. Mater. Processes, Proc. Eur. Conf., 1 st (1990), Meeting Date 1989 1, (1991): pp. 607-12. Editor(s): Exner, Hans Eckart Schumacher, V. Publisher: DGM Informationsges., Oberursei, Germany
121. Carbon Transport Through Oxide Scales on Fe-Cr Alloys, I. Wolf, H.J. Grabke, P. Schmidt, Oxidation of Metals 29, Nos. 3/4, (1988): pp. 289-306
122. Carburization and Oxidation. Grabke, H.J.; Wolf, I. Max-Planck-lnstitut fur Eisenforschung G.m.b.H., Dusseldorf, Germany, Materials Science and Engineering 87, (1987): pp. 23-33.
123. Aspects of the High-Temperature Carburization of Commercial Alloys. Corish, J. Barnes, J.; Smith, P. J., Dep. Chem., Trinity Coil., Dublin, Ire. Adv. Ceram. 23 (Nonstoichiom. Compd.), pp. 209-26.
124. Carburization of Iron-Nickel-Chromium Alloys. Grabke, H. J. Max-Planck-Institut Eisenforschung G.m.b.H., Dusseldorf, Zesz. Nauk. Akad. Gorn.-Hutn. Im. Stanislawa Staszica, Chem 1126, 5 (1987):pp. 9-33.
125. The Carburization Behavior of Steels for Petrochemical Plant, Hail, D J.; Jones, J. J. Natl Phys. Lab., Teddington, UK. Comm Eur. Communities, [Rep.] EUR (1987), EUR 11365, High Temp. Alloys, pp. 113-24.
126. Coke Deposition and Removal from Metals and Heat-Resistant Alloys Under Steam-Cracking Conditions, Jackson, P.R.S.; Young, D.J; Trimm, D.L; J. Materials Science 21, (1986): pp. 4376- 4384.
127. Solving High-Temperature Problems in Oil Refineries and Petrochemical Plants, Schillmoller, C.M. Chemical Engineering 93, 1, (1986), : pp. 83-87.
128. Make Low H2/CO Syngas Using Sulfur Passivated Reforming, H.C. Dibbern, P. Olesen, J.R. Rostrup-Neilsen, P.B. Tottrup, N.R. Udengaard, Hydrocarbon Processing, Jan. 1986, pp. 71-74
129. High Temperature Internal Corrosion of an Acetone Plant Furnace Outlet Tube: Failure Analysis and Laboratory Simulation, Foroulis, Z.A, Franco, R.J. Materials Performance, October, 1986, pp. 51-56
130. The Differentiation of the Chromium Carbides Cr7C3 and Cr3C2 in Carburized Nickel Chromium Alloys Using Contrasting by Reactively Sputtered Interference Layers. Kallfass, Monika; Stapf, Isolde; Hoerz, Gerhard. Inst. Werkstoffwiss., Max-Planck-Inst. Metallforsch., Stuttgart, D-7000/I, Fed. Rep. Ger. Prakt. Metallogr 23, 6 (1986): pp. 288-96
131. Sulfur Effects on the Internal Carburization of Iron -Nickel Chromium Alloys. Barnes, J.; Corish, J.; Norton, J.F. Jt. Res. Cent., Comm. Eur. Communities, Petten, 1755 ZG, Neth. Oxid Met 26, 5-6 (1986): pp. 333-50.
132. Morphological Studies of Coking on Heat-Resistant Alloys, Tomaszewicz P. Jackson, P.R.S., Trim, D.L., J. Materials Science 20, (1985): pp. 4035-4044.
133. Selecting Alloys for Heat Treating Equipment, Fluck, D.E., Herchenroeder, R.B., Lai, G.Y. Rothman, M.F., Metal Progress, Sept. 1985, pp. 35-40.
134. Use These Materials to Retrofit Ethylene Furnaces, Schillmoller, C.M., Hydrocarbon Processing, September 1985, pp. 101-104.
135. he Initial Stages of High-Temperature Corrosion of Iron-Chromium-Nickel and Chromium-Nickel Alloys in a Carburizing Atmosphere of Low Oxygen Partial Pressure. Smith, P. J.; Van der Biest, O.; Corish, J. Jt. Res. Cent, Comm. Eur. Communities, Petten, NL-1755 ZG, Neth Oxid. Met. 24, 1-2 (1985): pp. 47-83.
136. Carburization-Resistant Diffusion Barrier on High-Alloy Cast Iron-Chromium-Nickel Steel. Wysiecki, Mieczyslaw; Christodulu, Periklis, Tech Univ. Szczecin, Szczecin, Pol. Proc. Int Congr Heat Treat. Mater, 4 th 2, (1985): pp 987-98 Publisher: Tech. Univ. Berlin, Inst. Werkstofftech., Berlin, Fed. Rep. Ger.
137. Surface Engineering-Surface Modification of Materials, Kossowsky, R., Singhal, S.C., NATO ASISeries E-Applied Sciences, Martinus Nighoff Press 1984, pp. 426-451.
138. The Inhibition of High-Temperature Gaseous Carburization by the Use of Sulfur-Doping Techniques, Barnes, J.; Corish, J.; Norton, J. F. Jt. Res. Cent., Comm. Eur. Communities, Petten, NL-1755 ZG, Neth. Environ Probl. Mater. Durability, [Proc. Ir. Durability Fract. Conf.], 1st (1984), Meeting Date 1983, 189-94. Editor(s): Rees, D. W. A. Publisher: Parsons Press, Dublin, Ire.
139. Material Degradation by Carburization and Nitriding. Grabke, H. J. Duesseldorf, Fed Fed. Ger. Met.Corros., Proc.: Int. Congr Met. Corros.- 8 th 3, (1981): pp 2143-56 Publisher: DECHEMA, Frankfurt/Main, Fed. Rep. Ger.
140. The Oxidation and Carburization or Iron -9 Wt % Chromium-1 Wt % Molybdenum Alloy Steel at Temperature Between 480 and 650°C in Carbon Monoxide/Carbon Dioxide. Banks, P.; Lorimer, G. W.; Nolan, P. J.; Lister, S. K.; Garrett, J. C. P. Dep Metall. Jt., Univ. Manchester, Macclesfield/Cheshire, Engl. Mater. Supply Energy Demand, Proc. Int. Conf. (1981), 231-55. Editor(s): Hawbolt, E. Bruce; Mitchell, Alec. Publisher: ASM, Metals Park, Ohio.
141. The Kinetics of Gasification of carbon Deposited on Nickel Catalysts, C.A. Bernardo, D.L. Trimm, Carbon 17, (1979): pp. 115-120
142. Corrosion in Carbon Compounds Atmosphere. Chapter 12, Gas Corrosion of Metals, Mrowec, Stanislaw; Werber, Teodor. (1978): pp 430-443.
143. Materials For the Petrochemical Industry. Lancaster, J. F. International Metals Reviews, (1978)No.3, 101-147.
144. Laboratory Investigation of High Temperature Alloy Corrosion and Failures, L. H. Wolfe, Materials Performance 17, 4 (19780: pp 38-44.
145. High Temperature Corrosion of Stainless Steels in Coal Gasification Environments, Paper 49, CORROSION 77 (1977): 49/1-49/19.
146. 145.The Effect of Surface Pre-Treatment on Carbon Solution and Deposition in the Iron-Methane Reaction, A.M. Emsley, M.P. Hill, Carbon 15, (1977): pp. 205-210
147. Catastrophic Deterioration of High Temperature Alloys in Carbonaceous Atmospheres. Hochman, R.F. Georgia Inst. of Technology. Proc.- Electrochem. Soc. (1976), 77-1 (Proc. Symp. Prop High Temp. Alloys, 1976): pp. 715-732.
148. Metal Dusting Corrosion in Coal Gasification Environments. Perkins, R.A.; Coons, W.C.; Radd, F.J. Lockheed Palo Alto Res. Lab., Palo Alto, Calif., USA Proc. Electrochem. Soc. (1976), 77-1 (Proc. Symp. Prop High Temp. Alloys)(1976): pp. 733-49.
149. "Metal Dusting" Catastrophic Deterioration of Metals and Alloys in Carbonaceous Gases. Hochman, Robert F. 6 th I.C.M.C., Sidney, (1975): pp. 1-5.
150. High Temperature Corrosion Causative and Control Analysis for Incoloy 800 Alloy Heater Coils in Consol's Rapid City Gasification Plant. Fink, Carl E. Conoco Production Research (1974): pp. 1-38.
151. Review of Metal Dusting Corrosion in Carbon Monoxide and Hydrocarbon Atmospheres. Klett, M.G.; Hochman, R. F. Fifth International Conference on Metallic Corrosion, Tokyo, Japan (1972) published (1974).
152. Catalytic Effect of Iron on Decomposition of Carbon Monoxide: I. Carbon Deposition in H2-CO Mixtures. Turkdogan, E.T.; Vinters, J.R. Metallurgical Transactions 5, (1974): pp. 11-19.
153. Catalytic Effect of Iron on Decomposition of Carbon Monoxide: II. Effect of Additions of H2, H20, CO2, SO2 and H2S. Olsson, R.G.; Turkdogan, E.T. Metallurgical Transactions 5, (1974): pp. 21-26.
154. The Rate of Carburization of Iron in CO-H2 Atmospheres: Part I. Effect of Temperature and CO and H2-Pressures. Fruehan, R. J. Metallurgical Transactions 4 (1973): pp. 2123-2127
155. The Rate of Carburization of Iron in CO-H2 Atmospheres: Part II. The Effect of H20 and H2S on the Rate of Carburization of Iron in CO-H2 Atmospheres. Fruehan, R.J. Metallurgical Transactions 4 (1973): pp. 2129-2132.
156. Catastrophic Deterioration of Metals at High Temperature in Carbonaceous Environments. Hochman, R.F. A Report on Sponsored Research at Georgia Institute of Technology (1973).
157. Carburization of Stainless Steels in Methane-Hydrogen. Stanley, James K. High Temp. Gas-Metal React. Mixed Environ.; Proc. Symp. (1973) Editors, Jansson, Sven A., Foroulis, Z. A., Publisher ASME 143-154.
158. The Carburization and Decarburization of Iron in Gas Mixtures. Grabke, H. J. High Temp. Gas-Metal React. Mixed Environ.; Proc. Symp. (1973) Editors, Jansson, Sven A., Foroulis, Z. A. Publisher ASME, (1973): pp.130-142.
159. Factors Affecting Catastrophic Carburization (Metal Dusting). Koszman, I., High Temp. Gas-Metal React. Mixed Environ.; Proc. Symp. (1973) Editors, Jansson, Sven A., Foroulis, Z. A. Publisher ASME, (1973): pp. 155-167.
160. Metal Dusting. Schueler, Robert C. Hydrocarbon Processing (1972): pp. 73-75.
161. Basic Studies of Metal Deterioration ("Metal Dusting") in Carbonaceous Environments at Elevated Temperatures. Hochman, R.F. Proceedings of the Fourth International Congress on Metallic Corrosion, NACE (1972): pp. 260-263
162. The Hydrocarbon "Metal Dusting" Reaction of n-Butane with Iron. Klett, M. G. Thesis at Georgia Tech. Inst. (1970).
163. Surface Effects on the Thermal Decomposition of Hydrocarbons, Tamai, Y. Nishiyama, Y., Bulletin of the J. Petroleum Institute 12, 5 (1970): pp. 16-20.
164. The Effects of Hydrogen, Hydrogen Sulfide and Ammonia on the Elevated Temperature Deterioration of Metals and Alloys in Carbonaceous Gas Environments, H. W. Thron, Jr., MS and PhD. Theses, Georgia Tech University, September 1968.
165. Carbon Deposition on Iron and Nickel Sheets from Light Hydrocarbons, Tamai, Y. Nishiyama, Y., Takahashi, M., Carbon 6 (1968): pp. 593-602.
166. Mechanism and Kinetics of Iron Deterioration in Carbon Monoxide, R.V. Westerman, PhD. Thesis, Georgia Tech University, December 1967
167. Behavior of Carbon During the Corrosion of Stainless Steel by Carbon Dioxide, Antill, J.E., Warburton, J.B., Corrosion Science 7, (1967): pp. 645-649.
168. The Fundamentals of Metal Dusting. Hochman, R.F.; Burson, J. H. III. API Division of Refining Proceedings 46, (1966): pp. 331-334.
169. 168.Monitor Skin Temperature-Reduce Heater Tube Carburization, Backensto, E.B. Prior, J.E., and Porter, B.F., Hydrocarbon Processing 45(a), (1966): pp. 291-296.
170. An Introduction to Metal Dusting, Schueler, R.C., Preprint of Paper 48-66 given at the midyear meeting of AP Div. Of Refining, May 10, 1966.
171. Expensive Alloys Victims of Metal Dusting. Processing Notes, The Oil and Gas Journal, July 18, 1966, pp. 96-97.
172. Chemical Thermodynamics of High Temperature Reaction in Metal Dusting Corrosion. LeFrancois, P.A.; Hoyt, W.B. Thermodynamics of High-Temperature Reactions in Metal Dusting Corrosion 19, (1963): pp. 360t-368t.
173. Effect of CO2 on the Strength and Ductility of Type 304 Stainless Steel at Elevated Temperatures, Martin, W.P., McCoy, H.E., Corrosion 19, 5 (1963), pp. 157t-164t.
174. Minutes of Meeting, NACE Technical Unit Committee T-5B, Puyear, R.B. High Temperature Corrosion, Kansas City, MO (1962).
175. The High Temperature Reactions of Carbon Monoxide With Iron, Nickel and Austenitic StainlessSteel, Thesis of A. R. Cox, Georgia Tech University, December, 1962.
176. Corrosion and Incrustation From Use of Blast Furnace Gas in Gas Turbines, Corrosion Technology, Jan 1961, pp.13-14.
177. Corrosion and Incrustation from Use of Blast-Furnace Gas in Gas Turbines Editorial, Corrosion Technology January 1961, pp. 13-14
178. High Temperature Corrosion in Refinery and Petrochemical Service. Skinner, E.N. Mason, J.F.; Moran, J.J. Corrosion-National Association of Corrosion Engineers, Vol. 16 (1960) 593t-600t.
179. Internal Carburization and Oxidation of Ni-Cr Alloys in CO Type Atmospheres, Corrosion 16 (1960): pp. 608t-610t, .
180. Corrosion in a Hydrocarbon Conversion System. Prange, F.A. Corrosion-National Association of Corrosion Engineers 15, 12, (1959): pp. 619t-626t.
181. High Temperature Metal Deterioration in Atmospheres Containing Carbon Monoxide and Hydrogen, Hoyt, W.B., Caughey, RH., Corrosion 15, 12 (1959): pp. 627t.
182. Attack on Metals by Synthesis Gas From Methane-Oxygen Combustion. Eberle, F. Wylie, R.D., Corrosion 15, 12 (1959): pp. 622t- 626t.
183. High Temperature Corrosion of Metals Under Alternate Carburization and Oxidation, Ihrig, H.K., J. Electrochem. Soc., Preprint 91-23, (1947): pp. 333-344.
184. Corrosion of 18-8 Alloy Furnace Tubes in High-Temperature Vapor Phase Cracking Service. Camp, E.Q.; Phillips, Cecil; Gross, Lewis. Corrosion-National Association of Corrosion Engineers 1, (1945): pp. 149-160.