A composite speed controller based on a second-order model of permanent magnet synchronous motor system

Transactions of the Institute of Measurement and Control

Volumn 33, Issue 5, 2011, Pages 522-541

  li, Shihua ^a   Zong, Kai ^a   Liu, Huixian ^a  

^a SOUTHEAST UNIVERSITY   (China)

Author keywords

composite control; extended state observer; permanent magnet synchronous motor (PMSM); second order model; sliding mode control

Indexed keywords

CONTROLLERS; ELECTRIC MACHINE THEORY; PERMANENT MAGNETS; SLIDING MODE CONTROL; SPEED; SPEED REGULATORS; STATE ESTIMATION; SYNCHRONOUS MOTORS;

CLOSED-LOOP PERFORMANCE; COMPOSITE CONTROL; COMPOSITE CONTROLLERS; DISTURBANCE COMPENSATION; EXTENDED STATE OBSERVER; PERMANENT MAGNET SYNCHRONOUS MOTOR; SECOND-ORDER MODELS; SLIDING MODE CONTROLLER;

ELECTRIC MACHINE CONTROL;

EID: 79959841381     PISSN: 01423312     EISSN: None     Source Type: Journal    
DOI: 10.1177/0142331210371814     Document Type: Article

References (44)

1. Achour, A.Y., Mendil, B., Bacha, S. and Munteanu, I. 2009: Passivity-based current controller design for a permanent-magnet synchronous motor. ISA Transactions, 48, 336-46.
2. Baik, I.C., Kim, K.-H. and Youn, M.J. 2000: Robust nonlinear speed control of PM synchronous motor using boundary layer integral sliding mode control technique. IEEE Transactions on Control Systems and Technology, 8, 47-54.
3. Chen, W.H. 2004: Disturbance observer based control for nonlinear systems. IEEE Transactions on Mechatronics, 9, 706-10.
4. Chiang, H.K. and Tseng, C.H. 2004: Integral variable structure controller with grey prediction for synchronous reluctance motor drive. IEE Proceedings-Control Theory and Application, 151, 349-58.
5. Feng, G., Huang, L.P. and Zhu, D.Q. 2004: A new robust algorithm to improve the dynamic performance on the speed control of induction motor drive. IEEE Transactions on Power Electronics, 19, 1614-27.
6. Grcar, B., Cafuta, P., Znidaric, M. and Gausch, F. 1996: Nonlinear control of synchronous servo drive. IEEE Transactions on Control Systems and Technology, 4, 177-84.
7. Guo, L. and Chen, W.H. 2005: Disturbance attenuation and rejection for a class of nonlinear systems via DOBC approach. International Journal of Robust and Nonlinear Control, 15, 109-25.
8. Han, J.Q. 1995: The extended state observer of a class of uncertain systems. Control and Decision, 10, 85-8, (in Chinese).
9. Han, J.Q. 2009: From PID to active disturbance rejection control. IEEE Transactions on Industrial Electronics, 56, 900-6.
10. Ho, E.Y.Y. and Sen, P.C. 1991: Control dynamics of speed drive systems using sliding mode controllers with integral compensation. IEEE Transactions on Industry Applications, 27, 883-92.
11. Hsien, T.-L., Sun, Y.-Y. and Tsai, M.-C. 1997: H∞ control for a sensorless permanent-magnet synchronous drive. IEE Proceedings-Electric Power Applications, 144, 173-81.
12. Hung, J.Y., Gao, W. and Hung, J.C. 1993: Variable structure control: a survey. IEEE Transactions on Industrial Electronics, 40, 2-21.
13. Jan, R.-M., Tseng, C.-S. and Liu, R.-J. 2008: Robust PID control design for permanent magnet synchronous motor: a genetic approach. Electric Power Systems Research, 78, 1161-8.
14. Jin, H.Z. and Lee, J.M. 2009: An RMRAC current regulator for permanent-magnet synchronous motor based on statistical model interpretation. IEEE Transactions on Industrial Electronics, 56, 169-77.
15. Kim, K.H., Baik, I.C., Moon, G.-W. and Youn, M.-J. 1999: A current control for a permanent magnet synchronous motor with a simple disturbance estimation scheme. IEEE Transactions on Control Systems and Technology, 7, 630-3.
16. Kim, K.-H. and Youn, M.-J. 2002: A nonlinear speed control for a PM synchronous motor using a simple disturbance estimation technique. IEEE Transactions on Industrial Electronics, 49, 524-34.
17. Krishnan, R. 2001: Electric Motor Drives: Modeling, Analysis, and Control. Prentice-Hall.
18. Kung, Y.-S. and Tsai, M.-H. 2007: FPGA-based speed control IC for PMSM drive with adaptive fuzzy control. IEEE Transactions on Power Electronics, 22, 2476-86.
19. Lai, C.K. and Shyu, K.K. 2005: A novel motor drive design for incremental motion system via sliding-mode control method. IEEE Transactions on Industrial Electronics, 52, 499-507.
20. Li, S.H. and Liu, Z.G. 2009: Adaptive speed control for permanent magnet synchronous motor system with variations of load inertia. IEEE Transactions on Industrial Electronics, 56, 3050-9.
21. Li, S.H., Liu, H.X. and Ding, S.H. 2010: A speed control for a PMSM using finite-time feedback control and disturbance compensation. Transactions of the Institute of Measurement and Control, 32, 170-87.
22. Lin, F.J., Chiu, S.L. and Shyu, K.K. 1998: Novel sliding mode controller for synchronous motor drive. IEEE Transactions on Aerospace and Electronic Systems, 34, 532-42.
23. Lin, C.K., Liu, T.H. and Yang, S.H. 2008: Nonlinear position controller design with input-output linearisation technique for an interior permanent magnet synchronous motor control system. IET Power Electronics, 1, 14-26.
24. Miklosovic, R. and Gao, Z.Q. 2004: A robust two-degree-of-freedom control design technique and its practical application. 39th IAS Annual Meeting on Industry Application Conference, 1495-502.
25. Mohamed, Y.A.-R.I. 2007: Design and implementation of a robust current-control scheme for a PMSM vector drive with a simple adaptive disturbance observer. IEEE Transactions on Industrial Electronics, 54, 1981-8.
26. Mohamed, Y.A.-R.I. and El-Saadany, E.F. 2008: A current control scheme with an adaptive internal model for torque ripple minimization and robust current regulation in PMSM drive systems. IEEE Transaction on Energy Conversion, 23, 92-100.
27. Nandam, P.K. and Sen, P.C. 1989: Sliding mode speed control of a self-controlled synchronous motor based on state estimation and digital differentiation. Proceedings of IPEC 1989 291-5.
28. Ohnishi, K. 1987: A new servo method in mechatronics. Transactions of the Japanese Society of Electrical Engineers, 107-D, 83-6.
29. Pan, J.F., Cheung, N.C. and Yang, J.M. 2006: Auto-disturbance rejection controller for novel planar switched reluctance motor. IEE Proceedings-Electric Power Applications, 153, 307-15.
30. Pillay, P. and Krishnan, R. 1989: Modeling, simulation, and analysis of permanent-magnet motor drives. IEEE Transactions on Industry Applications, 25, 265-72.
31. Slotine, J.J.E. and Li, W. 1991: Applied Nonlinear Control. Prentice-Hall.
32. Su, J., Qiu, W., Ma, H. and Woo, P.-Y. 2004: Calibration-free robotic eye-hand coordination based on an auto disturbance-rejection controller. IEEE Transactions on Robotics, 20, 899-907.
33. Su, Y.X., Zheng, C.H. and Duan, B.Y. 2005: Automatic disturbances rejection controller for precise motion control of permanent-magnet synchronous motors. IEEE Transactions on Industrial Electronics, 52, 814-23.
34. Sun, B. and Gao, Z. 2005: A DSP-based active disturbance rejection control design for a 1-kW H-bridge DC-DC power converter. IEEE Transactions on Industrial Electronics, 52, 1271-7.
35. Utkin, V.I. 1977: Variable structure systems with sliding modes. IEEE Transactions on Automatic Control, 22, 212-22.
36. Utkin, V.I. 1993: Sliding mode control design principles and applications to electric drivers. IEEE Transactions on Electronic Systems, 14, 23-6.
37. Vilathgamuwa, M., Rahman, M.A., Tseng, K. and Uddin, M.N. 2003: Nonlinear control of interior permanent magnet synchronous motor. IEEE Transactions on Industry Applications, 39, 408-15.
38. Wai, R.J. 2001: Total sliding-mode controller for PM synchronous servo motor drive using recurrent fuzzy neural network. IEEE Transactions on Industrial Electronics, 48, 926-44.
39. Wang, G.J., Fong, C.T. and Chang, K.J. 2001: Neural-network-based self-tuning PI controller for precise motion control of PMAC motors. IEEE Transactions on Industrial Electronics, 48, 408-15.
40. Wei, X.J. and Guo, L. 2009: Composite disturbance-observer-based control and terminal sliding mode control for non-linear systems with disturbances. International Journal of Control, 82, 1082-1098.
41. Wei, X.J., Zhang, H.F. and Guo, L. 2009a: Composite disturbance-observer-based control and variable structure control for nonlinear systems with disturbances. Transactions of the Institute of Measurement and Control, 31, 401-23.
42. Wei, X.J., Zhang, H.F. and Guo, L. 2009b: Composite disturbance-observer-based control and terminal sliding mode control for uncertain structural systems. International Journal of Systems Science, 40, 1009-17.
43. Wu, D., Chen, K. and Wang, X. 2007: Tracking control and active disturbance rejection with application to noncircular machining. International Journal of Machine Tools and Manufacture, 47, 2207-17.
44. Zhou, J. and Wang, Y. 2002: Adaptive back-stepping speed controller design for a permanent magnet synchronous motor. IEE Proceedings-Electric Power Applications, 149, 165-72.