CFD evaluation of effects of split injection on combustion and emissions in a di diesel engine

SAE 2011 World Congress and Exhibition

Volumn , Issue , 2011, Pages

  Mobasheri, Raouf ^a   Peng, Zhijun ^a   Mirsalim, Seyed Mostafa ^b  

^a UNIVERSITY OF SUSSEX   (United Kingdom)

^b IPCO ^*  (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CFD MODELING; CFD SIMULATIONS; COMBUSTION PRO-CESS; COMBUSTION TEMPERATURES; DI DIESEL ENGINE; EXHAUST VALVES; EXPERIMENTAL DATA; HEAT RELEASE; INJECTION PULSE; INTAKE VALVE CLOSINGS; POLLUTANT EMISSION; SOOT EMISSIONS; SPLIT INJECTION;

COMBUSTION; FUEL INJECTION; INTAKE VALVES; SOOT; THREE DIMENSIONAL; THREE DIMENSIONAL COMPUTER GRAPHICS;

DIESEL ENGINES;

EID: 79959839072     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.4271/2011-01-0822     Document Type: Conference Paper

References (27)

1. Reitz, R.D., "Controlling D.I. Diesel Engine Emissions Using Multiple Injections and EGR", Combustion Science and Technology, 138: 1, 257-278, 1998.
2. Pierpont, D. A., "An Experimental Study of the Effect of Injection Parameters and EGR on D. I. Diesel Emissions and Performance", MSc Thesis, Mechanical Engineering Department, University of Wisconsin-Madison, 1994.
3. Gao, Z., and, Schreiber, W., "The Effects of EGR and Split Fuel Injection on Diesel Emission", International Journal of Automotive Technology, Vol. 2, No. 4, pp. 123-133. 2001.
4. Heywood, J. B., "Internal Combustion Engine Fundamentals," McGraw-Hill, Inc. New York, 1988.
5. Pierpont, D.A., Montgomery, D.T., and, Reitz, R.D., "Reducing Particulate and NOx Using Multiple Injections and EGR in a D.I. Diesel," SAE Technical Paper 950217, 1995, doi: 10.4271/950217.
6. Ladommatos, N., Abdelhalim, S.M., Zhao, H., Hu, Z., "The Dilution, Chemical, and Thermal Effects of Exhaust Gas Recirculation on Diesel Engine Emissions-Part 4: Effects of Carbon Dioxide and Water Vapour," SAE Technical Paper 971660, 1997, doi: 10.4271/971660.
7. Ladommatos, N., Abdelhalim, S. M., Zhao, H., and, Hu, Z., "Effects of EGR on Heat Release in Diesel Combustion," SAE Technical Paper 980184, 1998, doi: 10.4271/980184.
8. Hentschel, W., and, Richter, J.U., "Time-Resolved Analysis of Soot Formation and Oxidation in a Direct-Injection Diesel Engine for Different EGR-Rates by an Extinction Method," SAE Technical Paper 952517, 1995, doi: 10.4271/952517.
9. Dürnholz, M., Eifler, G., and, Endres, H., "Exhaust-Gas Recirculation-A Measure to Reduce Exhaust Emissions of DI Diesel Engines," SAE Technical Paper 920725, 1992, doi: 10.4271/920725.
10. Arcoumanis, C., Nagwaney, A., Hentschel, W., and, Röpke, S., "Effect of EGR on Spray Development, Combustion and Emissions in a 1.9L Direct-Injection Diesel Engine," SAE Technical Paper 952356, 1995, doi: 10.4271/952356.
11. Chan, M., Das, S., and, Reitz, R.D., "Modeling Multiple Injection and EGR Effects on Diesel Engine Emissions," SAE Technical Paper 972864, 1997, doi: 10.4271/972864.
12. Wiedenhoefer, J.F., and, Reitz, R.D., "Modelling the Effect of EGR and Multiple Injection Schemes on I.C. Engine Component Temperatures", Numerical Heat Transfer, Part A: Applications, 37: 7, 673-694, 2000.
13. Nehmer, D.A., "Measurements of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions" MSc Thesis, Mechanical Engineering Department, University of Wisconsin-Madison, 1993.
14. Dronniou, N., Lejeune, M., Balloul, I., and, Higelin, P., "Combination of High EGR Rates and Multiple Injection Strategies to Reduce Pollutant Emissions," SAE Technical Paper 2005-01-3726, 2005, doi: 10.4271/2005-01-3726.
15. Husberg, T., Denbratt, I., and, Karlsson, A., "Analysis of Advanced Multiple Injection Strategies in a Heavy-Duty Diesel Engine using Optical Measurements and CFD-Simulations," SAE Technical Paper 2008-01-1328, 2008, doi: 10.4271/2008-01-1328.
16. Mendez, S., and, Thirouard, B., "Using Multiple Injection Strategies in Diesel Combustion: Potential to Improve Emissions, Noise and Fuel Economy Trade-Off in Low CR Engines," SAE Int. J. Fuels Lubr. 1 (1): 662-674, 2008, doi: 10.4271/2008-01-1329.
17. Nehmer, D. A., and, Reitz, R.D., "Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions", SAE Paper 940668, 1994.
18. Patterson, M.A., Kong, S.C., Hampson, G.J., and, Reitz, R.D., "Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions", SAE Paper 940523, 1994.
19. Tow, T.C., Pierpont, A., and, Reitz, R. D., "Reducing Particulate and NOx Emission by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine," SAE Technical Paper 940897, 1994, doi: 10.4271/940897.
20. Shayler, P.J., and, Ng, H.K., "Simulation Studies of the Effect of Fuel Injection Pattern on NOx and Soot Formation in Diesel Engines," SAE Technical Paper 2004-01-0116, 2004, doi: 10.4271/2004-01-0116.
21. Tatschi, R., Gabrief, H.P., and, Priesching, P., "Fire-a Generic CFD Platform for DI Diesel Engine Mixture Formation and Combustion Simulation", User's Group Meeting at the SAE Congress, Detroit, M.I., March 4, 2001.
22. Fire Engine Simulation Environment User Manual v.2009. 1, 2009.
23. ICE Physics & Chemistry, AVL FIRE user Manual v.2009. 1, 2009.
24. Colin, O., Benkenida, A., "The 3-Zones Extended Coherent Flame Model (ECFM3Z) for Computing Premixed / Diffusion Combustion", Oil & Gas Science and Technology-Rev. IFP, Vol. 59, No. 6, pp. 593-609, 2004.
25. Priesching, P., Ramusch, G., Ruetz, J., Tatschi, R., "3D-CFD Modeling of Conventional and Alternative Diesel Combustion and Pollutant Formation-A Validation Study," SAE Technical Paper 2007-01-1907, 2007, doi: 10.4271/2007-01-1907.
26. Halstead, M., Kirsch, L., and, Quinn, C., "The Auto Ignition of Hydrocarbon Fueled at High Temperatures and Pressures-Fitting of a Mathematical Model", Combustion Flame, Vol. 30, 45-60, 1977.
27. Hioyasu, H., and, Nishida, K., "Simplified Three Dimensional Modeling of Mixture Formation and Combustion in a DI Diesel Engine," SAE Technical Paper 890269, 1989, doi: 10.4271/890269.