Pore network models of drying, contact angle, and film flows

Chemical Engineering and Technology

Volumn 34, Issue 7, 2011, Pages 1029-1038

  Prat, M ^a,b  

^a UNIVERSITÉ DE TOULOUSE   (France)

^b IMFT   (France)

Author keywords

Capillary porous media; Liquid films; Pore network modeling; Wettability

Indexed keywords

CAPILLARY-POROUS MEDIA; DRYING CURVES; FILM FLOWS; FUTURE PROSPECTS; OPEN PROBLEMS; PORE-NETWORK MODELING; PORE-NETWORK MODELS;

CONTACT ANGLE; LIQUID FILMS; POROUS MATERIALS;

DRYING;

EID: 79959767881     PISSN: 09307516     EISSN: 15214125     Source Type: Journal    
DOI: 10.1002/ceat.201100056     Document Type: Review

References (66)

1. P. Perré et al., in Modern Drying Technology, Vol. 1, Computational Tools at Different Scales (Eds: A. Mujumdar, E. T. Tsotsas), Wiley-VCH, Weinheim 2007.
2. F. Dullien, Porous Media: Fluid Transport and Pore Structure, Academic Press, New York 1991.
3. M. Kohout, Z. Grof, F. Štepánek, J. Colloid Interface Sci. 2006, 299, 342.
4. M. Blunt et al., Adv. Water Res. 2002, 25, 1069.
5. O. Chapuis et al., J. Power Sources 2008, 178, 258.
6. M. Rebai, M. Prat, J. Power Sources 2009, 192, 534.
7. M. Prat, Heat Pipe Sci. Technol. 2010, 1 (2), 129.
8. M. Prat, Chem. Eng. J. 2002, 86 (1/2), 153.
9. T. Metzger et al., in Modern Drying Technology, Vol. 1, Computational Tools at Different Scales (Eds: A. Mujumdar, E. T. Tsotsas), Wiley-VCH, Weinheim 2007.
10. H. Dong, M.J. Blunt, Phys. Rev. E 2009, 80, 036307.
11. J.F. Daian, J. Saliba, Int. J. Heat Mass Transfer 1991, 34 (8), 2081.
12. S.C. Nowicki et al., Drying Technol. 1992, 10 (4), 925.
13. M. Prat, Int. J. Multiphase Flow 1993, 19 (4), 691.
14. M. Prat, Int. J. Multiphase Flow 1995, 21 (5), 875.
15. A.G. Yiotis et al., Adv. Water. Res. 2001, 24, 439.
16. T. Metzger, E. Tsotsas, Chem. Eng. Res. Des. 2008, 86, 739.
17. H.P. Huinink et al., Eur. Phys. J. E 2002, 9, 487.
18. F. Plourde, M. Prat, Int. J. Heat Mass Transfer 2003, 46, 1293.
19. V.K. Surasani et al., Int. J. Heat Mass Transfer 2008, 51, 2506.
20. V.K. Surasani et al., Chem. Eng. Sci. 2008, 63 (21), 5218.
21. A.G. Yiotis et al., Phys. Rev. E 2003, 68 (3), 037303.
22. A.G. Yiotis et al., AiChE J. 2004, 50 (11), 2721.
23. A.G. Yiotis et al., Transport Porous Media 2005, 58, 63.
24. M. Prat, Int. J. Heat Mass Transfer 2007, 50, 1455.
25. L.A. Segura, Drying Technol. 2007, 25, 1677.
26. B. Markicevic et al., Phys. Fluids 2010, 22, 012103.
27. L.A. Segura, P.G. Toledo, Drying Technol. 2005, 23 (9), 2007.
28. D.S. Freitas, M. Prat, Transp. Porous Media 2000, 40, 1.
29. Y. Le Bray, M. Prat, Int. J. Heat Mass Transfer 1999, 42, 4207.
30. A.G. Yiotis et al., J. Colloid Interface Sci. 2006, 297, 738.
31. A.G. Yiotis et al., Water Resour. Res. 2007, 43, W06403.
32. L.A. Segura, P.G. Toledo, Chem. Eng. J. 2005, 111, 237.
33. J.C.C.B.R. Moreira, K. Rajagopal, Int. J. Mod. Phys. C 2006, 17 (12), 1763.
34. J.B. Laurindo, M. Prat, Chem. Eng. Sci. 1996, 51 (23), 5171.
35. J.B. Laurindo, M. Prat, Chem. Eng. Sci. 1998, 53 (12), 2257.
36. I.N. Tsimpanogiannis et al., Phys. Rev. E 1999, 59 (4), 4353.
37. M. Prat, F. Bouleux, Phys. Rev. E 1999, 60 (5), 5647.
38. L. Xu et al., Phys. Rev. Lett. 2008, 101, 094502.
39. A.G. Yiotis et al., Drying Technol. 2010, 28 (8), 981.
40. T.M. Shaw, Phys. Rev. Lett. 1987, 59 (15), 1671.
41. O. Chapuis, M. Prat, Phys. Rev. E 2007, 75, 046311.
42. H. Chraibi et al., Phys. Rev. E 2009, 79, 026313.
43. T. Metzger et al., AIChE J. 2007, 53 (12), 3029.
44. T. Metzger et al., Drying Technol. 2007, 25, 49.
45. K.M. Pillai et al., Int. J. Heat Mass Transfer 2009, 52, 1643.
46. A.G. Yiotis et al., J. Porous Media 2010, 104.
47. J.G. Salin, Maderas: Cienc. Tecnol. 2006, 8, 149.
48. J.G. Salin, Drying Technol. 2008, (5), 560.
49. F. Debaste, V. Halloin, J. Food Process Eng. 2010, 33 (1), 2.
50. A. Goudie, H. Viles, Salt Weathering Hazards, Wiley, Chichester 1997.
51. N. Shokri et al., Water Resour. Res. 2009, 45, W02415.
52. S. Pulloor Kuttanikkad et al., J. Power Sources 2011, 196, 1145.
53. M.J. Blunt, J. Pet. Sci. Eng. 1998, 20, 117.
54. J. Stefan, Sitzungsber. Math.-Naturwiss. Akad. Wiss. Wien 1871, 63, 63.
55. F. Chauvet et al., Phys. Rev. Lett. 2009, 103, 124502.
56. J. Van Brakel, in Advances in Drying (Ed: A. S. Mujumdar), Hemisphere, New York 1980.
57. P. Coussot, Eur. Phys. J. B 2000, 15, 557.
58. F. Chauvet et al., Phys. Fluids 2010, 22, 112113.
59. S. Beyhaghi et al., submitted.
60. M. Suzuki, S. Maeda, J. Chem. Eng. Jpn. 1968, 1 (1), 26.
61. E.U. Schlunder, Chem. Eng. Sci. 1988, 43 (10), 2685.
62. A. Kharagani et al., in Proc. of the 17th International Drying Symposium (IDS 2010), Magdeburg 2010.
63. N. Sghaier, M. Prat, Transport Porous Media 2009, 12 (6), 549.
64. S. Veran et al., in Proc. of the 20th International Symposium on Transport Phenomena, Victoria 2009.
65. A. Francisco et al., Drying Technol., in press.
66. N. Vorhauer et al., in Proc. of the 17th International Drying Symposium (IDS 2010), Magdeburg 2010.