Direct injection of high pressure gas: Scaling properties of pulsed turbulent jets

SAE International Journal of Engines

Volumn 3, Issue 2, 2010, Pages 383-396

  Baert, Rik ^a   Klaassen, Arno ^a   Doosje, Erik ^b  

^a EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b TNO   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

CONSTANT STATIC PRESSURE; DISCHARGE COEFFICIENTS; HIGH PRESSURE GAS; HOLE GEOMETRY; INJECTION EQUIPMENT; INJECTION PRESSURES; JET ANGLE; JET PENETRATION; LENGTH TO DIAMETER RATIO; MIE SCATTERING; MOMENTUM CONSERVATIONS; OIL DROPLETS; OPTICAL ACCESS; PARTICLE IMAGE VELOCIMETRIES; PLANAR LASER; PRESSURE CHAMBER; PRESSURE RATIO; PULSED GAS; PULSED TURBULENT JETS; SCALING PROPERTIES; SINGLE HOLE; SIZE SCALE; SPREADING ANGLE; SUPER-CRITICAL; TIME-AVERAGED VELOCITY; TIP VORTEX; TRANSIENT JET; TRANSITION PERIOD;

AERODYNAMICS; GAS ENGINES; JET PUMPS; LASER DIAGNOSTICS; VELOCITY MEASUREMENT; VORTEX FLOW; WIND TUNNELS;

DIRECT INJECTION;

EID: 79959448984     PISSN: 19463936     EISSN: 19463944     Source Type: Journal    
DOI: 10.4271/2010-01-2253     Document Type: Article

References (35)

1. Baert, R.S.G., de Rijke, J., Smokers, R.T.M., Natural Gas on the Road for Lower CO2, Proceedings of IFP Int. Conf. 'Which Fuels for Low CO2 Engines', Sept. 22-23, p. 109-121, 2004.
2. Willi, M.L., Richards, B.G., Design and development of a Direct Injected Glow Plug Ignition Assisted, Natural Gas Engine, ASME Jl. Enging Gas Turbines and Power, Vol. 117, p. 799-803, 1995.
3. Hodgkins, K.B., Hill, P.G., Ouellette, P., Hung, P., Directly Injected Natural Gas Fueling of Diesel Engines, SAE Technical Paper 961671, 1996, doi:10.4271/961671.
4. Miura, A., Honjou, F., Nakamura, A., Harayama, N., Sasaki, M., Further Development of Fuel Consumption For Heavy-duty CNG Engine, Paper F2000A173, Seoul 2000 FISITA World Automotive Congress, June 12-15, 2000.
5. Taniguchi, S., Tsukasaki, Y., Yasuda, A., Study of compressed natural gas injection engine, FISITA paper F2006P089, 2006.
6. Baratta, M., Catania, A.E., Spessa, E., Herrmann, L., Roessler, K., Multi-Dimensional Modeling of Direct Natural-Gas Injection and Mixture Formation in a Stratified- Charge SI Engine with Centrally Mounted Injector, SAE Int. J. of Engines 1(1):607-626, 2008.
7. Harrington, J., Munshi, S., Nedelcu, S., Ouellette, P., Thompson, J., Whitfield, S., Direct Injection of Natural Gas in a Heavy-Duty Diesel Engine, SAE Technical Paper 2002-01-1630, 2002, doi:10.4271/2002-01-1630.
8. Li, Y., Kirkpatrick, A., Mitchell, C., Willson, B., Characteristic and computational fluid dynamics modeling of high-pressure gas jet injection, ASME Jl. of Engineering for Gas Turbines and Power, Vol. 126, 192-197, 2004.
9. Ouellette, P., Hill, P.G., Turbulent Transient Gas Injections, ASME Journal of Fluids Engineering, Vol. 122, p. 743-752, 2000.
10. Miyake, M., Biwa, T., Endoh, Y., Shimotsu, M., Murakami, S., Komoda, T., The Development of High- Output, Highly Efficient Gas Burning Diesel Engines, CIMAC Paper D11.2, 1983.
11. Tomita, E., Hamamoto, Y., Yoshiyama, S., Tsutsumi, H., Watanabe, T., Ambient Air Entrainment into Transient Hydrogen Jet and its Flame Jet, SAE Technical Paper 970894, 1997, doi:10.4271/970894.
12. Boyan, X., Furuyama, M., Jet characteristics of CNG injector with MPI system, JSAE Review 19, p. 229-234, 1998.
13. Rubas, P.J., Paul, M.A., Martin, G.C., Coverdill, R.E., Lucht, R.P., Peters, J.E., DelVecchio, K.A., Methane Jet Penetration in a Direct-Injection Natural Gas Engine, SAE Technical Paper 980143, 1998, doi:10.4271/980143.
14. Bruneaux, G., A Study of Mixture Formation in Direct Injection Diesel Like Conditions Using Quantitative Fuel Concentration Visualizations in a Gaseous Fuel Jet, SAE Technical Paper 2002-01-1632, 2002, doi: 10.4271/2002-01-1632.
15. Melling, A., Tracer particles and seeding for particle image velocimetry, Meas.Sci.Technol., Vol.8, p. 1406-1416, 1997.
16. ERCOFTAC; classification of under-expanded jets.
17. Naber, J.D., Siebers, D.L., Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays, SAE Technical Paper 960034, 1996, doi: 10.4271/960034.
18. Hentschel, W., & Homburg, A. Investigation of Spray Formation of DI Gasoline Hollow-cone Injectors Inside a Pressure Chamber and a Glass Ring Engine by Multiple Optical Techniques, SAE Technical Paper 1999-01-3660, 1999, doi:10.4271/1999-01-3660.
19. Wigley, G., Pitcher, G., Effect of compression pressure on the spray morphology of GDI pressure swirl injectors, 5th International Symp. On Diagnostics and Modeling of Combustion in Internal Combustion Engines, 2006.
20. Baert, R.S.G., Frijters, P.J.M., Somers, B., Luijten, C.C.M., de Boer, W.A., Design and Operation of a High Pressure, High Temperature Cell for HD Diesel Spray Diagnostics: Guidelines and Results, SAE Technical Paper 2009-01-0649, 2009, doi:10.4271/2009-01-0649.
21. Kayser, J.C., Shambaugh, R.L., Discharge coefficients for compressible flow through small-diameter orifices and convergent nozzles, Chem. Engineering Science, Vol. 46, nr. 7, p. 1697-1711, 1991.
22. Schlichting, H., Boundary Layer Theory, McGraw- Hill, 1979.
23. Abramovich, G., The theory of turbulent jets, Cambridge: M.I.T. Press, 1963.
24. Rife, J., Heywood, J.B., Photographic and Performance Studies of Diesel Combustion With a Rapid Compression Machine, SAE Technical Paper 740948, 1974, doi: 10.4271/740948.
25. Kleinstein, G., Mixing in Turbulent Axially Symmetric Free Jets, Journal of Spacecraft and Rockets, Vol. 1, p. 403-408, 1964.
26. Rajaratnam, N., Turbulent jets., Elsevier, Amsterdam, 1976.
27. Araneo, L., Coghe, A., Effects of Fuel Temperature and Ambient Pressure on a GDI Swirled Injector Spray, SAE Technical Paper 2000-01-1901, 2000, doi: 10.4271/2000-01-1901.
28. Dent, JC., A Basis for the Comparison of Various Experimental Methods for Studying Spray Penetration, SAE Technical Paper 710571, 1971, doi:10.4271/710571.
29. Wakuri, Y., Fujii, M., Amitani, T. and Tsuneya, R., Studies of Penetration of Fuel Spray in a Diesel Engine, Bull. JSME, 3, p. 123-130, 1960.
30. Desantes, J.M., Payri, R., Salvador, F.J., Gil, A., Development and validation of a theoretical model for diesel spray penetration, Fuel, Vol. 85, p. 910-917, 2006.
31. N.N., Steady-State Jets, Los Alamos Science, p. 46-49, 1985.
32. Moodie, K., Ewan, B.C.R., Jets discharging to atmosphere, J. Loss Prev. Process Ind., Vol. 3., 68-76, 1990.
33. Birch, A.D., Brown, D.R., Dodson, M.G., Swaffield, F., The Structure and Concentration Decay of High Pressure Jets of Natural Gas, Combustion Science and Technology, Vol. 36, p. 249-261, 1984.
34. Witze, P.O., Centerline Velocity Decay of Compressible Free Jets, AIAA Jl., Vol. 12, p. 417-418, 1974.
35. Shirakashi, M., Kawase, H., Wakiya, S., Analysis of Turbulent Structure of an Impulsively Started Jet by Applying Image Processing, Bull. JSME, Vol.29, p. 3772-3778, 1986.