Fire performance of water-cooled GFRP columns. II: Postfire investigation

Journal of Composites for Construction

Volumn 15, Issue 3, 2011, Pages 413-421

  Bai, Yu ^a   Keller, Thomas ^a  

^a EPFL   (Switzerland)

Author keywords

Buckling; Columns; Compression; Initial imperfections; Polymer matrix composites; Postfire

Indexed keywords

BUCKLING CURVES; BUCKLING LOADS; DEVELOPED MODEL; FIRE DAMAGES; FIRE PERFORMANCE; INITIAL IMPERFECTION; INITIAL IMPERFECTIONS; MECHANICAL PERFORMANCE; POSTFIRE; SHEAR FAILURE; TEMPERATURE-DEPENDENT MATERIAL; ULTIMATE LOADS;

GLASS TRANSITION; POLYMER MATRIX COMPOSITES; WATER COOLING SYSTEMS;

BUCKLING;

EID: 79959351843     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000191     Document Type: Article

References (20)

1. AISC. (1999). Load and resistance factor design specification: For structural steel buildings, Chicago
2. Bai, Y., and Keller, T. (2007). " Modeling of postfire stiffness for FRP composites under elevated and high temperatures." Composites Part A 1359-835X, 38 (10), 2142-2153. 10.1016/j.compositesa.2007.06.010 (Pubitemid 47499134)
3. Bai, Y., and Keller, T. (2009 a). " Modeling of strength degradation for fiber reinforced polymer composites in fire." J. Compos. Mater., 43 (21), 2371-2385. 0021-9983 10.1177/0021998309344642
4. Bai, Y., and Keller, T. (2009 b). " Shear failure of pultruded FRP composites under axial compression." J. Compos. Constr. 1090-0268, 13 (3), 234-242. 10.1061/(ASCE)CC.1943-5614.0000003
5. Bai, Y., and Keller, T. (2011). " Fire performance of water-cooled GFRP columns. I: Fire endurance investigation." J. Compos. Constr., 15 (3), 404-412. 1090-0268
6. Bai, Y., Keller, T., and Valĺe, T. (2008). " Modeling of stiffness of FRP composites under elevated and high temperatures." Compos. Sci. Technol. 0266-3538, 68 (15-16), 3099-3106. 10.1016/j.compscitech.2008.07. 005
7. Bai, Y., Valĺe, T., and Keller, T. (2007). " Modeling of thermo-physical properties for FRP composites under elevated and high temperatures." Compos. Sci. Technol. 0266-3538, 67 (15-16), 3098-3109. 10.1016/j.compscitech.2007.04.019 (Pubitemid 47560016)
8. Barbero, E., and Tomblin, J. (1994). " A phenomenological design equation for FRP columns with interaction between local and global buckling." Thin-Walled Struct., 18, 117-131. 0263-8231 10.1016/0263- 8231(94)90013-2
9. Cassity, P. (2000). " Advanced composites for bridge infrastructure renewal-Phase II DARPA Agreement No. MDA972-94-3-0030/advanced composites technology transfer/bridge." Infrastructure Renewal Consortium (Volume IV, Task 16-Modular Composite Bridge), Final Technical Rep.
10. Feih, S., Mathys, Z., Gibson, A. G., and Mouritz, A. P. (2007). " Modeling the tension and compression strengths of polymer laminates in fire." Compos. Sci. Technol., 67, 551-564. 0266-3538 10.1016/j.compscitech. 2006.07.038 (Pubitemid 46024418)
11. Fiberline. (2002). Design manual, Fiberline Composites, Kolding, Denmark
12. Keller, T., Tracy, C., and Hugi, E. (2006 a). " Fire endurance of loaded and liquid-cooled GFRP slabs for construction." Composites Part A 1359-835X, 37 (7), 1055-1067. 10.1016/j.compositesa.2005.03.030 (Pubitemid 44316514)
13. Keller, T., Tracy, C., and Zhou, A. (2006 b). " Structural response of liquid-cooled GFRP slabs subjected to fire. Part I: Material and post fire modeling." Composites Part A 1359-835X, 37 (9), 1286-1295. 10.1016/j.compositesa.2005.08.006 (Pubitemid 44119219)
14. Mouritz, A. P. (2003). " Simple models for determining the mechanical properties of burnt FRP composites." Mater. Sci. Eng., 359, 237-246. 0025-5416 10.1016/S0921-5093(03)00351-4 (Pubitemid 37060941)
15. Mouritz, A. P., and Mathys, Z. (1999). " Postfire mechanical properties of marine polymer composites." Compos. Struct., 47, 643-653. 0263-8223 10.1016/S0263-8223(00)00043-X
16. Pering, G. A., Farrell, P. V., and Springer, G. S. (1980). " Degradation of tensile and shear properties of composites exposed to fire or high temperatures." J. Compos. Mater., 14, 54-68. 0021-9983
17. Puente, I., Insausti, A., and Azkune, M. (2006). " Buckling of GFRP column: An empirical approach to design." J. Compos. Constr., 10 (6), 529-537. 1090-0268 10.1061/(ASCE)1090-0268(2006)10:6(529) (Pubitemid 44794257)
18. Timoshenko, S. P., and Gere, J. M. (1963). Theory of elastic stability, 2nd Ed., McGraw Hill, New York
19. Turvey, G. J., and Zhang, Y. (2006). " Shear failure strength of web-flange junctions in pultruded GRP WF profiles." Constr. Build. Mater., 20, 81-89. (Pubitemid 41360090)
20. Wong, P. M. H., Davies, M. J., and Wang, Y. C. (2004). " An experimental and numerical study of the behavior of glass fiber reinforced plastics (GRP) short columns at elevated temperatures." Compos. Struct., 63, 33-43. 0263-8223 10.1016/S0263-8223(03)00122-3 (Pubitemid 37400377)