Design of concrete-filled FRP tubular columns: Provisions in the Chinese technical code for infrastructure application of FRP composites

Journal of Composites for Construction

Volumn 15, Issue 3, 2011, Pages 451-461

  Yu, T ^a   Teng, J G ^a  

^a HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

Composite columns; Concrete; Design; Fiber reinforced polymers; Tubular columns

Indexed keywords

COMPOSITE COLUMN; CONCRETE-FILLED; CONCRETE-FILLED FRP TUBES; DESIGN PROVISIONS; EXCELLENT CORROSION RESISTANCES; FIBER-REINFORCED POLYMERS; FRP COMPOSITE; HONG-KONG; INFRASTRUCTURE APPLICATIONS; STEEL REINFORCED CONCRETE; TUBULAR COLUMNS;

COMPOSITE BEAMS AND GIRDERS; CORROSION RESISTANCE; DESIGN; ENGINEERING RESEARCH; FIBER REINFORCED PLASTICS; POLYMERS; REINFORCED CONCRETE; REINFORCED PLASTICS; TUBULAR STEEL STRUCTURES;

FILLED POLYMERS;

EID: 79959335578     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000159     Document Type: Article

References (53)

1. Ahmad, I., Zhu, Z. Y., and Mirmiran, A. (2008). Fatigue behavior of concrete-filled fiber-reinforced polymer tubes. J. Compos. Constr. 1090-0268, 12 (4), 478-487. 10.1061/(ASCE)1090-0268(2008)12:4(478)
2. Ahmad, I., Zhu, Z. Y., Mirmiran, A., and Fam, A. Z. (2005). Shear strength prediction of deep CFFT beams., ACI Special Publication SP-230-61 (CD-ROM), 1085-1102.
3. American Concrete Institute (ACI). (2008). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI-440, Detroit
4. ASTM. (1995). Standard test method for compressive properties of polymer matrix composite materials with unsupported gage section by shear loading. ASTM D3410/D3410M-95, Philadelphia
5. ASTM. (2000a). Standard test method for apparent hoop tensile strength of plastic or reinforced plastic pipe by split disk method. ASTM D2290-00, Philadelphia
6. ASTM. (2000b). Standard test method for tensile properties of polymer matrix composite materials,. ASTM D3039/D3039M-00, Philadelphia
7. ASTM. (2002). Standard test method for compressive properties of rigid plastics. ASTM D695-02a, Philadelphia
8. Burgueno, R., and Bhide, K. M. (2006). Shear response of concrete-filled FRP composite cylindrical shells. J. Struct. Eng. 0733-9445, 132 (6), 949-960. 10.1061/(ASCE)0733-9445(2006)132:6(949)
9. Chen, J. F., and Teng, J. G. (2003 a). Shear capacity of FRP strengthened RC beams: FRP rupture. J. Struct. Eng. 0733-9445, 129 (5), 615-625. 10.1061/(ASCE)0733-9445(2003)129:5(615) (Pubitemid 40001043)
10. Chen, J. F., and Teng, J. G. (2003 b). Shear capacity of FRP strengthened RC beams: FRP debonding. Constr. Build. Mater., 17 (1), 27-41. (Pubitemid 35437474)
11. China Architecture and Building Press. (2002). Code for design of concrete structures, GB-50010, China
12. China Planning Press. (2010). Technical code for infrastructure application of FRP composites, GB-50608, China
13. Concrete Society. (2004). Design guidance for strengthening concrete structures with fibre composite materials. 2nd Ed., Concrete Society Technical Rep. No. 55, Crowthorne, Berkshire, UK
14. Daniel, I. M., and Ishai, O. (2006). Engineering mechanics of composite materials, Oxford University Press, Oxford.
15. Davol, A. (1998). Structural characterization of concrete filled fiber reinforced shells. Ph.D. thesis, Univ. of California, San Diego.
16. Fam, A. Z. (2000). Concrete-filled fiber-reinforced polymer tubes for axial and flexural structural members. Ph.D. thesis, Dept. of Civil and Geological Engineering, The Univ. of Manitoba, Winnipeg, Manitoba, Canada.
17. Fam, A. Z., and Cole, B. (2007). Tests on reinforced-concrete-filled fiber-reinforced-polymer circular tubes of different shear spans. Can. J. Civ. Eng. 0889-3241
18. Fam, A. Z., and Mandal, S. (2006). Prestressed concrete-filled fiber-reinforced polymer circular tubes tested in flexure. PCI J., 51 (4), 42-54. 0887-9672 (Pubitemid 44212603)
19. Fam, A. Z., and Rizkalla, S. H. (2001 a). Behavior of axially loaded concrete-filled circular fiber-reinforced polymer tubes. ACI Struct. J., 98 (3), 280-289. 0889-3241
20. Fam, A. Z., and Rizkalla, S. H. (2001 b). Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes. ACI Struct. J., 98 (4), 451-461. 0889-3241
21. Fam, A. Z., and Rizkalla, S. H. (2002). Flexural behavior of concrete-filled fiber-reinforced polymer circular tubes. J. Compos. Constr. 1090-0268, 6 (2), 123-132. 10.1061/(ASCE)1090-0268(2002)6:2(123) (Pubitemid 40253152)
22. Hahn, H., and Tsai, S. (1973). Nonlinear elastic behavior of unidirectional composite laminae. J. Compos. Mater., 7 (1), 102-118. 0021-9983 10.1177/002199837300700108
23. Haj-Ali, R., and Kilic, H. (2002). Nonlinear behavior of pultruded FRP composites. Composites, Part B 1359-8368, 33 (3), 173-191. 10.1016/S1359- 8368(02)00011-2 (Pubitemid 34524718)
24. Helmi, K., Fam, A., Mufti, A., and Hall, J. M. (2006). Effects of driving forces and bending fatigue on structural performance of a novel concrete-filled fibre-reinforced-polymer tube flexural pile. Can. J. Civ. Eng. 0266-3538 10.1016/S0266-3538(02)00125-2
25. Hinton, M. J., Kaddour, A. S., and Soden, P. D. (2004). A further assessment of the predictive capabilities of current failure theories for composite laminates: comparison with experimental evidence. Compos. Sci. Technol., 64 (3-4), 549-588. 0266-3538 10.1016/S0266-3538(03)00227-6 (Pubitemid 38043352)
26. Hollaway, L. C., and, Teng, J. G., eds. (2008). Strengthening and rehabilitation of civil infrastructures using FRP composites, Woodhead Publishing, UK.
27. Hong, W. K., Kim, H. C., and Yoon, S. H. (2002). Experiment of compressive strength enhancement of circular concrete column confined by carbon tubes. KCI Concr. J. 0263-8223 10.1016/j.compstruct.2007.10.013
28. Jiang, T. (2008). FRP-confined RC columns: Analysis, behavior, and design. Ph.D. thesis, The Hong Kong Polytechnic Univ., Hong Kong.
29. Jiang, T., and Teng, J. G. (2006). Strengthening of short circular RC columns with FRP jackets: a design proposal. Proc., Third Int. Conf. on FRP Composites in Civil Engineering (CICE 2006), Florida Int. Univ., Miami.
30. Lam, L., and Teng, J. G. (2003). Design-oriented stress-strain model for FRP-confined concrete. Constr. Build. Mater., 17 (6-7), 471-489.
31. Lifshitz, J. (1988). Determination of nonlinear shear modulus of a fiber-reinforced lamina from the axial behavior of (45)s specimens. J. Compos. Technol. Res. 0884-6804, 10 (4), 146-150. 10.1520/CTR10277J
32. Mirmiran, A. (2003). Stay-in-place FRP form for concrete columns. Adv. Struct. Eng., 6 (3), 231-241., 12 (1), 39-49.
33. Mirmiran, A., and Shahawy, M. (1996). A new concrete-filled hollow FRP composite column. Composites, Part B 1359-8368, 27B (3-4), 263-268. 10.1016/1359-8368(95)00019-4 (Pubitemid 126340881)
34. Mirmiran, A., and Shahawy, M. (1997). Behavior of concrete columns confined by fiber composites. J. Struct. Eng. 0733-9445, 123 (5), 583-590. 10.1061/(ASCE)0733-9445(1997)123:5(583) (Pubitemid 127617684)
35. Mirmiran, A., Shahawy, M., and Beitleman, T. (2001). Slenderness limit for hybrid FRP-concrete columns. J. Compos. Constr. 1090-0268, 5 (1), 26-34. 10.1061/(ASCE)1090-0268(2001)5:1(26) (Pubitemid 32158910)
36. Mirmiran, A., Shahawy, M., and Samaan, M. (1999). Strength and ductility of hybrid FRP-concrete beam-columns. J. Struct. Eng. 0733-9445, 125 (10), 1085-1093. 10.1061/(ASCE)0733-9445(1999)125:10(1085)
37. Ozbakkaloglu, T., and Oehlers, D. J. (2008). Concrete-filled square and rectangular FRP tubes under axial compression. J. Compos. Constr. 1090-0268, 12 (4), 469-477. 10.1061/(ASCE)1090-0268(2008)12:4(469)
38. Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley, New York.
39. Samaan, M. S. (1997). An analytical and experimental investigation of concrete-filled fiber reinforced plastic (FRP) tubes. Ph.D. thesis, Dept. of Civil and Environmental Engineering, The Univ. of Central Florida, Orlando, FL.
40. Seible, F., Burgueno, R., Abdallah, M., and Nuismer, R. (1996). Advanced composite carbon shell systems for bridge columns under seismic loads. Proc., 11th World Conf. on Earthquake Engineering, Elsevier Science, Oxford, Paper No. 1375.
41. Shao, Y. T. (2003). Behavior of FRP-concrete beam-columns under cyclic loadings. Ph.D. thesis, North Carolina State Univ., Raleigh, NC.
42. Soden, P. D., Kitching, R., Tse, P. C., and Tsavalas, Y. (1993). Influence of winding angle on the strength and deformation of filament-wound composite tubes subjected to uniaxial and biaxial loads. Compos. Sci. Technol., 46 (4), 363-378. 0266-3538 10.1016/0266-3538(93)90182-G (Pubitemid 23632327)
43. Son, J., and Fam, A. (2008). Finite element modeling of hollow and concrete-filled fiber composite tubes in flexure: Model development, verification and investigation of tube parameters. Eng. Struct., 30 (10), 2656-2666. 0141-0296 10.1016/j.engstruct.2008.02.014
44. Teng, J. G., Chen, G. M., Chen, J. F., Rosenboom, O. A., and Lam, L. (2009 a). Behavior of RC beams shear strengthened with bonded or unbonded FRP wraps. J. Compos. Constr. 1090-0268, 13 (5), 394-404. 10.1061/(ASCE)CC.1943- 5614.0000040
45. Teng, J. G., Jiang, T., Lam, L., and Luo, Y. Z. (2009 b). Refinement of a design-oriented stress-strain model for FRP-confined concrete., J. Compos. Constr. 1090-0268, 13 (4), 269-278. 10.1061/(ASCE)CC.1943-5614.0000012
46. Teng, J. G., and Lam, L. (2004). Behavior and modeling of FRP-confined concrete. J. Struct. Eng. 0733-9445, 130 (11), 1713-1723. 10.1061/(ASCE)0733- 9445(2004)130:11(1713) (Pubitemid 40253202)
47. Teng, J. G., and Yao, J. (2000). Self-weight buckling of FRP tubes filled with wet concrete. Thin-Walled Struct., 38 (4), 337-353. 0263-8231 10.1016/S0263-8231(00)00041-0 (Pubitemid 32160540)
48. Teng, J. G., Yu, T., Wong, Y. L., and Dong, S. L. (2007). Hybrid FRP-concrete-steel tubular columns: Concept and behavior. Constr. Build. Mater., 21 (4), 846-854. (Pubitemid 44880664)
49. Toutanji, H. A. (1999). Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets. ACI Mater. J., 96 (3), 397-404. 0889-325X
50. Xiao, Y. (2004). Applications of FRP composites in concrete columns. Adv. Struct. Eng., 7 (4), 335-343. 0899-1561, 12 (2), 139-146. 10.1061/(ASCE)0899- 1561(2000)12:2(139)
51. Xiao, Y., Wu, H., and Martin, G. R. (1999). Prefabricated composite jacketing of RC columns for enhanced shear strength. J. Struct. Eng. 0733-9445, 125 (3), 255-264. 10.1061/(ASCE)0733-9445(1999)125:3(255)
52. Yu, T., Wong, Y. L., Teng, J. G., Dong, S. L., and Lam, S. S. (2006). Flexural behaviour of hybrid FRP-concrete-steel double skin tubular members. J. Compos. Constr. 1090-0268, 10 (5), 443-452. 10.1061/(ASCE)1090-0268(2006)10: 5(443) (Pubitemid 44410225)
53. Yuan, W., and Mirmiran, A. (2001). Buckling analysis of concrete-filled FRP tubes. Int. J. Struct. Stab. Dyn., 1 (3), 367-383. 1084-0702, 11 (3), 359-370. 10.1061/(ASCE)1084-0702(2006)11:3(359)