Phenomenological modeling of anisotropy induced by evolution of the dislocation structure on the macroscopic and microscopic scale

International Journal of Material Forming

Volumn 4, Issue 2, 2011, Pages 141-154

  Clausmeyer, Till ^a   van den Boogaard, Ton ^b   Noman, Muhammad ^a   Gershteyn, Grygoriy ^c   Scharper, Mirko ^c   Svendsen, Bob ^d   Bargmann, Swantje ^a  

^a TU DORTMUND UNIVERSITY   (Germany)

^b UNIVERSITY OF TWENTE   (Netherlands)

^c LEIBNIZ UNIVERSITY HANNOVER   (Germany)

^d RWTH AACHEN UNIVERSITY   (Germany)

Author keywords

Cross hardening; Induced flow anisotropy; Material modeling; Microstructural evolution

Indexed keywords

BCC METALS; COMMON MATERIALS; CROSS HARDENING; CRYSTAL PLASTICITY; DISLOCATION MICROSTRUCTURES; DISLOCATION STRUCTURES; FLOW ANISOTROPY; INTERNAL VARIABLES; LOADING PATH; MATERIAL MODELING; METAL PLASTICITY; MICRO-STRUCTURAL; MICROSCOPIC SCALE; PHENOMENOLOGICAL MODELING; STRAIN PATHS; TRANSIENT BEHAVIOR; WORK FOCUS;

ANISOTROPY; BEHAVIORAL RESEARCH; DISLOCATIONS (CRYSTALS); METAL FORMING; SHEET METAL;

MICROSTRUCTURAL EVOLUTION;

EID: 79959224448     PISSN: 19606206     EISSN: 19606214     Source Type: Journal    
DOI: 10.1007/s12289-010-1017-4     Document Type: Article

References (38)

1. Balasubramanian S, Anand L (2002) Elasto-viscoplastic constitutive equations for polycrystalline fcc materials at low homologous temperatures. J Mech Phys Solids 50(1): 101-126.
2. Baltov A, Sawczuk A (1965) A rule of anisotropic hardening. Acta Mech I(2): 81-92.
3. Bouvier S, Teodosiu C, Haddadi H, Tabacaru V (2003) Anisotropic work-hardening behaviour of structural steels and aluminium alloys at large strains. J Phys IV France 105: 215-222.
4. Bouvier S, Alves J, Oliveira M, Menezes L (2005) Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes. Comput Mater Sci 32: 301-315.
5. de Montleau P (2004) Programming of Teodosiu's hardening model. IAP P5/08 progress report, Mechanical Engineering, University of Liege, Belgium.
6. Estrin Y, Tóth LS, Molinari A, Bréchet Y (1998) A dislocation-based model for all hardening stages in large strain deformation. Acta Mater 46(15): 5509-5522.
7. Fernandes JV, Schmitt JH (1983) Dislocation microstructures in steel during deep drawing. Philos Mag A 48(6): 841-870.
8. Ghosh AK, Backofen WA (1973) Strain-hardening and instability in biaxially stretched sheets. Metall Trans 4: 1113-1123.
9. Gurtin M, Fried E, Anand, L (2010) The mechanics and thermodynamics of continua. Cambridge University Press, Cambridge.
10. Hasegawa T, Yakou T, Karashima S (1975) Deformation behaviour and dislocation structures upon stress reversal in polycrystalline aluminium. Mater Sci Eng 20: 267-276.
11. Hiwatashi S, van Bael A, van Houtte P, Teodosiu C (1997) Modelling of plastic anisotropy based on texture and dislocation structure. Comput Mater Sci 9: 274-284.
12. Holmedal B, van Houtte P, An Y (2008) A crystal plasticity model for strain-path changes in metals. Int J Plast 24(8): 1360-1379.
13. Hu Z, Rauch EF, Teodosiu C (1992) Work-hardening behavior of mild steel under stress reversal at large strains. Int J Plast 8(7): 839-856.
14. Kalidindi SR, Bronkhorst CA, Anand L (1992) Crystallographic texture evolution in bulk deformation processing of fcc metals. J Mech Phys Solids 40(3): 537-569.
15. Li S, Hoferlin E, van Bael A, van Houtte P, Teodosiu C (2003) Finite element modeling of plastic anisotropy induced by texture and strain-path change. Int J Plast 19: 647-674.
16. Mandel J, Généralization de la théorie de plasticité de W. T. Koiter. Int J Solid Struct 1: 273-29.
17. Marin EB, Dawson PR (1998) Elastoplastic finite element analyses of metal deformations using polycrystal constitutive models. Comput Methods Appl Mech Eng 165(1-4): 23-41.
18. Marin EB, Dawson PR (1998) On modelling the elasto-viscoplastic response of metals using polycrystal plasticity. Comput Methods Appl Mech Eng 165(1-4): 1-21.
19. Mughrabi H (1983) Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals. Acta Metall 31(9): 1367-1379.
20. Deutsches Institut für Normung e. V. (2006) DIN EN 10049-measurement of roughness average Ra and peak count RPc on metallic flat products. Tech. rep., DIN.
21. Deutsches Institut für Normung e. V. (2006) DIN EN 10130-cold rolled low carbon steel flat products for cold forming technical delivery conditions. Tech. rep., DIN.
22. Deutsches Institut für Normung e. V. (2009) DIN EN 573-3 aluminium and aluminium alloys-chemical composition and form of wrought products. Tech. rep., DIN.
23. Deutsches Institut für Normung e. V. (2009) DIN EN ISO 6892-1 metallic materials-tensile testing-part 1: method of test at room temperature. Tech. rep., DIN.
24. Nesterova EV, Bacroix B, Teodosiu C (2001) Experimental observation of microstructure evolution under strain-path changes in low-carbon if steel. Mater Sci Eng A 309-310: 495-499.
25. Nesterova EV, Bacroix B, Teodosiu C (2001) Microstructure and texture evolution under strain-path changes in low-carbon interstitial-free steel. Metall Mater Trans 32A: 2527-2538.
26. Noman M, Clausmeyer T, Barthel C, Svendsen B, Huétink J, van Riel M (2010) Experimental characterization and modeling of the hardening behavior of the sheet steel LH800. Mater Sci Eng A 527(10-11): 2515-2526.
27. Peeters B, Kalidindi SR, Teodosiu C, van Houtte P, Aernoudt E (2002) A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase b. c. c. polycrystals. J Mech Phys Solids 50(4): 783-807.
28. Rauch EF, Schmitt JH (1989) Dislocation substructures in mild steel deformed in simple shear. Mater Sci Eng A 113: 441-448.
29. Rauch EF, Thuillier S (1993) Rheological behaviour of mild steel under monotonic loading conditions and cross-loading. Mater Sci Eng A 164: 255-259.
30. Rybin VV (1986) Severe plastic deformations and fracture of metals. Metallurgiya, Moscow.
31. Stander N, Roux W, Goel T, Eggleston T, Craig K (2008) LS-OPT user's manual. Livermore Software Technology Corporation.
32. Strauven Y, Aernoudt E (1987) Directional strain softening in ferritic steel. Acta Metall 35: 1029-1036.
33. Teodosiu C, Hu Z (1995) Evolution of the intragranular microstructure at moderate and large strains: modelling and computational significance. In: Shen SF, Dawson PR (eds) Simulation of materials processing: theory, methods and applications. Balkema, Rotterdam, pp 173-182.
34. Teodosiu C, Hu Z (1998) Microstructure in the continuum modelling of plastic anisotropy. In: Proceedings of 19th Risø international symposium on material's science: modelling of structure and mechanics of materials from microscale to product. Risø National Laboratory, Roskilde, Denmark, pp 149-168.
35. Thuillier S, Rauch EF (1994) Development of microbands in mild steel during cross loading. Acta Metall Mater 42: 1973-1983.
36. Thuillier S, Manach PY, Menezes LF (2010) Occurence of strain path changes in a two-stage deep drawing process. J Mater Process Technol 210(2): 226-232.
37. van Riel M, van den Boogaard AH (2007) Stress-strain responses for continuous orthogonal strain path changes with increasing sharpness. Scr Mater 57(5): 381-384.
38. van Riel M (2009) Strain path dependency in sheet metal-experiments and models. Dissertation, Universiteit Twente.