Interlaminar shear stresses around internal elliptical cylindrical holes weakening edge-loaded cross-ply plates

AIAA Journal

Volumn 49, Issue 6, 2011, Pages 1292-1298

  Chaudhuri, Reaz A ^a   Seide, Paul ^b,c  

^a UNIVERSITY OF UTAH   (United States)

^b UNIVERSITY OF SOUTHERN CALIFORNIA   (United States)

^c Department of Civil and Environmental Engineering ^*  (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BI-LAYER; COMPATIBILITY METHODS; COMPOSITE PLATES; CROSS-PLY PLATES; CYLINDRICAL HOLES; EQUILIBRIUM METHODS; IN-PLANE STRESS; INTERFACIAL COMPATIBILITY; INTERLAMINAR SHEAR; LAMINATED COMPOSITE PLATES; LAYER-WISE; LINE SINGULARITY; POSTPROCESSING METHODS; SEMI-ANALYTICAL; STRESS SINGULARITIES;

LAMINATED COMPOSITES; NANOCOMPOSITE FILMS; PLATES (STRUCTURAL COMPONENTS);

SHEAR STRESS;

EID: 79957715052     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/1.J050799     Document Type: Article

References (36)

1. Chaudhuri, R. A., and Seide, P., "Triangular Element for Analysis of a Stretched Plate Weakened by a Part-Through Hole," Computers and Structures, Vol. 24, No. 1, 1986, pp. 97-105. doi:10.1016/0045-7949(86)90338-X
2. Chaudhuri, R. A., "Stress Concentration around a Part-Through Hole Weakening a Laminated Plate," Computers and Structures, Vol. 27, No. 5, 1987, pp. 601-609. doi:10.1016/0045-7949(87)90075-7 (Pubitemid 18532185)
3. Chaudhuri, R. A., "Weakening Effects of Internal Part-through Elliptic Holes on Homogeneous and Laminated Composite Plates," Composite Structures, Vol. 81, No. 3, 2007, pp. 362-373. doi:10.1016/j.compstruct.2006.08. 031 (Pubitemid 46958957)
4. Chaudhuri, R. A., "A New Three-Dimensional Shell Theory in General (Non-Lines-of-Curvature) Coordinates for Analysis of Curved Panels Weakened by Through/Part-Through Holes," Composite Structures, Vol. 89, No. 2, 2009, pp. 321-332. doi:10.1016/j.compstruct.2008.07.005
5. Chaudhuri, R. A., "Three-Dimensional Asymptotic Stress Field in the Vicinity of the Line of Intersection of a Circular Cylindrical Through/ Part-Through Open/Rigidly Plugged Hole and a Plate," International Journal of Fracture, Vol. 122, Nos. 1-2, 2003, pp. 65-88. doi:10.1023/B:FRAC.0000005375. 68272.c5 (Pubitemid 38144073)
6. Becker,W., "Complex Method for the Elliptic Hole in an Unsymmetric Laminate," Archive of Applied Mechanics, Vol. 63, No. 3, 1993, pp. 159-169. doi:10.1007/BF00794890
7. Persson, E., and Madenci, E., "Composite Laminates with Elliptical Pin-Loaded Holes," Engineering Fracture Mechanics, Vol. 61, No. 2, 1998, pp. 279-295. doi:10.1016/S0013-7944(98)00041-1 (Pubitemid 29105238)
8. Chern, S. M., and Tuttle, M. E. "On Displacement Fields in Orthotropic Laminates Containing an Elliptical Hole," Journal of Applied Mechanics, Vol. 67, No. 3, 2000, pp. 527-539. doi:10.1115/1.1309545
9. Chaudhuri, R. A., "An Equilibrium Method for Prediction of Transverse Shear Stresses in a Thick Laminated Plate," Computers and Structures, Vol. 23, No. 2, 1986, 139-146. doi:10.1016/00457949(86) 90208-7
10. Engblom, J. J., and Ochoa, O. O., "Finite Element Formulation Including Interlaminar Stress Calculations," Computers and Structures, Vol. 23, No. 2, 1986, pp. 241-249. doi:10.1016/0045-7949(86)90216-6 (Pubitemid 16590813)
11. Chaudhuri, R. A., and Seide, P., "An Approximate Method for Prediction of Transverse Shear Stresses in a Laminated Shell," International Journal of Solids and Structures, Vol. 23, No. 8, 1987, pp. 1145-1161. doi:10.1016/0020-7683(87)90052-7 (Pubitemid 18528922)
12. Byun, C., and Kapania,R. K. "Prediction of Interlaminar Stresses in Laminated Plates Using Global Orthogonal Interpolation Polynomials," AIAA Journal, Vol. 30, No. 11, 1992, pp. 2740-2749. doi:10.2514/3.11293 (Pubitemid 23574820)
13. Noor, A. K., Kim, Y. H., and Peters, J. M. "Transverse Shear Stresses and Their Sensitivity Coefficients in Multilayered Composite Panels," AIAA Journal, Vol. 32, No. 6, 1994, pp. 1259-1268. doi:10.2514/3.12128
14. Rohwer, K., and Rolfes, R., "Calculating 3D Stresses in Layered Composite Plates and Shells," Mechanics of Composite Materials, Vol. 34, No. 4, 1998, pp. 355-362. doi:10.1007/BF02257903 (Pubitemid 128359393)
15. Chaudhuri, R. A., and Seide, P., "An Approximate Semi-analytical Method for Prediction of Interlaminar Shear Stresses in an Arbitrarily Laminated Thick Plate," Computers and Structures, Vol. 25, No. 4, 1987, pp. 627-636. doi:10.1016/0045-7949(87)90270-7 (Pubitemid 17568850)
16. Chaudhuri, R. A., "A Semi-Analytical Approach for Prediction of Interlaminar Shear Stresses in Laminated General Shells," International Journal of Solids and Structures,Vol. 26, Nos. 5-6, 1990, pp. 499-510. doi:10.1016/0020-7683(90)90024-P
17. Chaudhuri, R. A., Balaraman, K., and Kunukkasseril, V. X., "Admissible Boundary Conditions and Solutions to Internally Pressurized Thin Arbitrarily Laminated Cylindrical Shell Boundary- Value Problems," Composite Structures, Vol. 86, No. 4, 2008, pp. 385- 400. doi:10.1016/j. compstruct.2007.12.008
18. Chaudhuri, R. A., "Computation of Transverse Shear Stresses in the Vicinity of the Circumferential Re-Entrant Corner Line of an Internal Part-Through Hole Weakening an Edge-Loaded Plate," Composite Structures, Vol. 89, No. 2, 2009, pp. 315-320. doi:10.1016/j.compstruct.2008.07.004
19. Chaudhuri, R. A., "Transverse Shear Stress Distribution through Thickness near an Internal Part-Through Elliptical Hole in a Stretched Plate," Composite Structures, Vol. 92, No. 4, 2010, pp. 818-825. doi:10.1016/j.compstruct.2009.08.019
20. Chaudhuri, R. A., and Seide, P., "Interlaminar Shear Stresses around an Internal Part-Through Hole in a Laminated Composite Plate," Composite Structures, Vol. 92, No. 4, 2010, pp. 835-843. doi:10.1016/j.compstruct.2009.08. 042
21. Chaudhuri, R. A., and Xie M., "Tale of Two Saints: St. Venant and "St. Nick": Does St. Venant's Principle Apply to Bi-Material Straight Edge and Wedge Singularity Problems?," Composites Science and Technology, Vol. 60, Nos. 12-13, 2000, pp. 2503-2515. doi:10.1016/S0266-3538(00)00044-0
22. Chaudhuri, R. A., and Chiu, S. J., "Three-Dimensional Asymptotic Stress Field at the Front of an Unsymmetric Bimaterial Wedge Associated with Matrix Cracking or Fiber Break," Composite Structures, Vol. 78, No. 2, 2007, pp. 254-263. doi:10.1016/j.compstruct.2005.09.013 (Pubitemid 44849289)
23. Wang, S. S., and Choi, I., "Boundary-Layer Effects in Composite Laminates: Part 1: Free-Edge Stress Singularities," Journal of Applied Mechanics, Vol. 49, No. 3, 1982, pp. 541-548. doi:10.1115/1.3162514
24. Chaudhuri, R. A., and Xie, M., "Free-Edge Stress Singularity in a Bimaterial Laminate," Composite Structures, Vol. 40, No. 2, 1997, pp. 129-136. doi:10.1016/S0263-8223(97)00152-9 (Pubitemid 128368738)
25. Chaudhuri, R. A., "An Eigenfunction Expansion Solution for Three- Dimensional Stress Field in the Vicinity of the Circumferential Line of Intersection of a Bimaterial Interface and a Hole," International Journal of Fracture, Vol. 129, No. 4, 2004, pp. 361-384. doi:10.1023/B:FRAC.0000049494. 43743.45 (Pubitemid 44774867)
26. Chaudhuri, R. A., and Chiu, S. J., "Three-dimensional Asymptotic Stress Field in the Vicinity of an Adhesively Bonded Scarf Joint Interface," Composite Structures, Vol. 89, No. 3, 2009, pp. 475-483. doi:10.1016/j.compstruct.2008.10.002
27. Chaudhuri, R. A., and Seide, P., "Triangular Finite Element for Analysis of Thick Laminated Plates," International Journal for Numerical Methods in Engineering, Vol. 24, No. 6, 1987, pp. 1203-1224. doi:10.1002/nme.1620240611 (Pubitemid 17604397)
28. Chaudhuri, R. A., "Analysis of Laminated Shear-Flexible Angle-Ply Plates," Composite Structures, Vol. 67, No. 1, 2005, pp. 71-84. doi:10.1016/j.compstruct.2004.01.002 (Pubitemid 39407980)
29. Seide, P., and Chaudhuri, R. A., "Triangular Finite Element for Analysis of Thick Laminated Shells," International Journal for Numerical Methods in Engineering, Vol. 24, No. 8, 1987, pp. 1563-1579. doi:10.1002/nme.1620240812 (Pubitemid 17660250)
30. Chaudhuri, R. A., and Seide, P., "Triangular Element for Analysis of Perforated Plates under Inplane and Transverse Loads," Computers and Structures, Vol. 24, No. 1, 1986, pp. 87-95. doi:10.1016/0045-7949(86)90337-8
31. Chaudhuri, R. A., "A Simple and Efficient Plate Bending Element," Computers and Structures, Vol. 25, No. 6, 1987, pp. 817-824. doi:10.1016/0045-7949(87)90197-0 (Pubitemid 17618162)
32. Chaudhuri, R. A., "A Degenerate Triangular Shell Element with Constant Cross-Sectional Warping," Computers and Structures, Vol. 28, No. 3, 1988, pp. 315-325. doi:10.1016/0045-7949(88)90071-5 (Pubitemid 18577404)
33. Arfken, G., Mathematical Methods for Physicists, 2nd ed., Academic Press, New York, 1970.
34. 0 Shell Element Based on Assumed Natural-Coordinate Strains," Journal of Applied Mechanics, Vol. 53, No. 2, 1986, pp. 278-290. doi:10.1115/1.3171752 (Pubitemid 16571307)
35. Korn, G. A., and Korn, T. M., Differential Geometry, Mathematical Handbook for Scientists and Engineers, 2nd ed., McGraw-Hill, New York, 1968, Ch. 17.
36. Fung, Y. C., Foundations of Solid Mechanics, Prentice-Hall, Englewood Cliffs, NJ, 1965.