Emissions from a gas turbine sector rig operated with synthetic aviation and biodiesel fuel

Journal of Engineering for Gas Turbines and Power

Volumn 133, Issue 11, 2011, Pages

  Pucher, Greg ^a   Allan, William ^a   Laviolette, Marc ^a   Poitras, Pierre ^b  

^a ROYAL MILITARY COLLEGE OF CANADA   (Canada)

^b Quality Engineering Test Establishment   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

BIO-DIESEL FUEL; COMBUSTION SYSTEMS; COMBUSTION TESTING; DROPLET SIZE DISTRIBUTIONS; EXHAUST EMISSION; EXHAUST PLANES; FATTY ACID METHYL ESTER; FUEL BLENDS; FUEL FORMULATION; FUEL NOZZLE; JET A-1; PATTERN FACTORS; PHASE DOPPLER ANEMOMETRY; ROLLS-ROYCE; SMOKE PRODUCTION; SPRAY CHARACTERISTICS; SPRAY PATTERN; TEMPERATURE MAPS; THERMOCOUPLE RAKES;

BIODIESEL; COMBUSTION; COMBUSTION CHAMBERS; COMBUSTORS; DEPOSITS; FATTY ACIDS; GAS EMISSIONS; SPRAY NOZZLES; THERMOCOUPLES;

SYNTHETIC FUELS;

EID: 79957670726     PISSN: 07424795     EISSN: 15288919     Source Type: Journal    
DOI: 10.1115/1.4002844     Document Type: Article

References (20)

1. Corporan, E., DeWitt, M., Belovich, V., Pawlik, R., Lynch, A., Gord, J., and Meyer, T., 2007, " Emissions Characteristics of a Turbine Engine and Research Combustor Burning a Fischer-Tropsch Jet Fuel.," Energy Fuels 0887-0624, 21, pp. 2615-2626. 10.1021/ef070015j (Pubitemid 47602751)
2. DeWitt, M. J., Corporan, E., Graham, J., and Minus, D., 2008, " Effects of Aromatic Type and Concentration in Fischer-Tropsch Fuel on Emissions Production and Material Compatibility.," Energy Fuels 0887-0624, 22, pp. 2411-2418. 10.1021/ef8001179
3. Speight, J. G., 2008, Synthetic Fuels Handbook-Properties, Process and Performance, McGraw-Hill, New York, Chap. and.
4. Moses, C., and Roets, P., 2009, " Properties, Characteristics, and Combustion Performance of Sasol Fully Synthetic Fuel.," ASME J. Eng. Gas Turbines Power 0742-4795, 131, p. 041502. 10.1115/1.3028234
5. Hermann, F., Klingmann, J., Gabrielsson, R., Joergen, P., Olsson, J., and Owrand, F., 2006, " Chemical Analysis of Combustion Products From a High Pressure Gas Turbine Combustor Rig Fueled by Jet A-1 and a Fischer-Tropsch-Based Fuel.," ASME Paper No. GT2006-90600.
6. Kahandawala, M., DeWitt, M., Corporan, E., and Sidhu, S., 2008, " Ignition and Emission Characteristics of Surrogate and Practical Jet Fuels.," Energy Fuels 0887-0624, 22, pp. 3673-3679. 10.1021/ef800303a
7. Hileman, J., Wong, H., Oritz, D., Brown, N., Maurice, L., and Rumizen, M., 2008, " The Feasibility and Potential Environmental Benefits of Alternative Fuels for Commercial Aviation.," Proceedings of the 26th International Congress of the Aeronautical Sciences, pp. 5-8.
8. Moses, C., 2008, " Comparative Evaluation of Semi-Synthetic Jet Fuels.," Final Report, CRC Project No. AV-2-04a, pp. 9-29.
9. Corporan, E., Monroig, O., Wagner, M., and Dewitt, M., 2004, " Influence of Fuel Chemical Composition on Particulate Matter Emissions of a Turbine Engine.," ASME Paper No. GT2004-54335.
10. 2008, CGSB 3.24 Aviation Turbine Fuel (Military Grades F-34 and F-44), Fuel Specification.
11. Goodger, E., 1994, Jet Fuel Supply and Quality, Landfall Press, Norwich, UK, pp. 7-13.
12. Gardiner, D., LaViolette, M., Pucher, G., and Bennet, L., 2007, " Biodiesel Fuel and Emission Testing on Military Equipment-Phase II.," Royal Military College of Canada, Mechanical Engineering Report No. 070401, pp. 25-40.
13. 2002, " A Comprehensive Analysis of Biodiesel Impacts on Exhaust Emissions.," United States Environmental Protection Agency, EPA Technical Report No. EPA420-02-01, pp. 2-30.
14. Corporan, E., Reich, R., Monroig, O., DeWitt, M., Larson, V., Aulich, T., Mann, M., and Seames, W., 2005. " Impacts of Biodiesel on Pollutant Emissions of a JP-8 Fueled Turbine Engine.," J. Air Waste Manage. Assoc. 1047-3289, 55 (7), pp. 940-949.
15. Bishop, K., 2009, " Effects of Fuel Nozzle Condition Upon Gas Turbine Combustion Chamber Exit Temperature Profiles.," MS thesis, Department of Mechanical and Aerospace Engineering, Carleton University, Ottawa, ON, pp. 10-23.
16. Kotzer, C. E., 2008, " Effects of Combustion Chamber Geometry Upon Exit Temperature Profiles.," MS thesis, Royal Military College of Canada, pp. 12-46.
17. Pucher, G., and Allan, W. D., 2008, " Emissions From Thermal Stability Additives, Phase 3.," Internal Report, Royal Military College of Canada, RMC Mechanical Engineering Report No. 080602, pp. 3-42.
18. Goodger, E., 2000, Transport Fuels and Technology-Mobility for the Millennium, Landfall Press, Norwich, UK, pp. 60-90.
19. Underhill, R., Shafique, H., Fiset, P., and Prociw, L. A., 2006, " Optical Patternation for Quality Control of Gas Turbine Fuel Injectors.," 19th Annual Conference on Liquid Atomization and Spray Systems, ILASS Americas, Toronto, ON, pp. 2-3.
20. Lefebvre, A. H., 1999, Gas Turbine Combustion, Taylor & Francis, London, pp. 206-208.