Retraction Notice: The effects of limewater on flexural strength and water permeability of Al2O3 nanoparticles binary blended concrete (Journal of Composite Materials, (2011), 45, 6, (1165-1172), 10.1177/0021998310378907);The effects of limewater on flexural strength and water permeability of Al2O3 nanoparticles binary blended concrete

Journal of Composite Materials

Volumn 45, Issue 11, 2011, Pages 1165-1172

  Nazari, Ali ^a   Riahi, Shadi ^a  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

Al2O3 nanoparticle; coefficient of water absorption; concrete; curing medium; flexural strength; percentage of water absorption; rate of water absorption

Indexed keywords

ALUMINA; ALUMINUM OXIDE; BENDING STRENGTH; CONCRETES; CURING; HIGH PERFORMANCE CONCRETE; HYDRATED LIME; LIME; NANOPARTICLES;

CURING MEDIUMS; FILLER EFFECTS; GEL FORMATION; PARTIAL REPLACEMENT; PERCENTAGE OF WATER ABSORPTIONS; REPLACEMENT LEVEL; STRENGTH OF CONCRETE; WATER PERMEABILITY;

WATER ABSORPTION;

EID: 79957584407     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998319875285     Document Type: Erratum

References (40)

1. Li H., Xiao HG, Yuan J. and Ou J. Microstructure of cement mortar with nanoparticles. Composites Part B 2003 ; 35: 185-189.
2. Erdogdu K. and Tucker P. Effects of fly ash nanoparticle size on strength of Portland cement fly ash mortars. Cem Concr Res 1998 ; 28: 1217-1222. (Pubitemid 128634282)
3. Lee SH, Sakai E., Diamond M. and Bang WK Characterization of fly ash directly from electrostatic precipitator. Cem Concr Res 1999 ; 29: 1791-1797. (Pubitemid 30531591)
4. Lu P. and Young JF Hot pressed DSP cement paste. Mater Res Soc Symp Proc 1992 ; 245: 321-328.
5. Richard P. and Cheyrezy M. Reactive powder concretes with high ductility and 200-800 MPa compressive strength. In: Mehta PK (ed.) Concrete technology: past, present, and future, Proceedings of the V. Mohan Malhotra Symposium, ACISP-144. Detroit: American Concrete Institute. 1994, pp.507-518.
6. Jo BW, Kim CH, Tae G. and Park JB Characteristics of cement mortar with nano-SiO2 nanoparticles. Constr Build Mater 2007 ; 21 (6). 1351-1355. (Pubitemid 46216798)
7. Kuo WT, Lin KL, Chang WC and Luo HL Effects of nano-materials on properties of waterworks sludge ash cement paste. J Ind Eng Chem 2006 ; 12 (5). 702-709.
8. Lin DF and Tsai MC Mineralogy and microstructure from the influence of the nano-composite additives on sewage sludge ash mortars. J Air Waste Manag Assoc 2006 ; 56: 1146-1154.
9. Li H., Xiao H. and Ou J. A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials. Cem Concr Res 2004 ; 34: 435-438.
10. Li H., Zhang M. and Ou J. Abrasion resistance of concrete containing nanoparticles for pavement. Wear 2006 ; 260: 1262-1266. (Pubitemid 43765990)
11. Flores-Velez LM and Dominguez O. Characterization and properties of Portland cement composites incorporating zinc-iron oxide nanoparticles. J Mater Sci 2002 ; 37: 983-988. (Pubitemid 34269082)
12. Nazari A., Riahi Sh, Riahi Sh, Shamekhi SF and Khademno A. Mechanical properties of cement mortar with Al2O3 nanoparticles. J Am Sci 2010 ; 6 (4). 94-97.
13. Nazari A., Riahi Sh, Riahi Sh, Shamekhi SF and Khademno A. The effects of incorporation Fe2O3 nanoparticles on tensile and flexural strength of concrete. J Am Sci 2010 ; 6 (4). 90-93.
14. Nazari A., Riahi Sh, Riahi Sh, Shamekhi SF and Khademno A. Improvement the mechanical properties of the concrete by using TiO2 nanoparticles. J Am Sci 2010 ; 6 (4). 98-101.
15. Nazari A., Riahi Sh, Riahi Sh, Shamekhi SF and Khademno A. Embedded TiO2 nanoparticles mechanical properties monitoring in cementitious composites. J Am Sci 2010 ; 6 (4). 86-89.
16. Nazari A., Riahi Sh, Riahi Sh, Shamekhi SF and Khademno A. Benefits of Fe2O3 nanoparticles in concrete mixing matrix. J Am Sci 2010 ; 6 (4). 102-106.
17. Nazari A., Riahi Sh, Riahi Sh, Shamekhi SF and Khademno A. Assessment of the effects of the cement paste composite in presence TiO2 nanoparticles. J Am Sci 2010 ; 6 (4). 43-46.
18. Nazari A., Riahi Sh, Riahi Sh, Shamekhi SF and Khademno A. An investigation on the Strength and workability of cement based concrete performance by using TiO2 nanoparticles. J Am Sci 2010 ; 6 (4). 29-33.
19. Nazari A., Riahi Sh, Riahi Sh, Shamekhi SF and Khademno A. Influence of Al2O3 nanoparticles on the compressive strength and workability of blended concrete. J Am Sci 2010 ; 6 (5). 6-9.
20. ASTM C150. Standard specification for portland cement. Annual book of ASTM standards. West Conshohocken, PA: ASTM, 2001.
21. Zivica V. Effects of the very low water/cement ratio. Constr Build Mater 2009 ; 23 (8). 2846-2850.
22. Bui DD, Hu J. and Stroeven P. Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete. Cem Concr Compos 2005 ; 27 (3). 357-366. (Pubitemid 40114365)
23. ASTM C293. Standard test method for flexural strength of concrete (using simple beam with center-point loading) West Conshohocken, PA: ASTM, 2001.
24. ASTM C642. Standard test method for density, absorption, and voids in hardened concrete. West Conshohocken, PA: ASTM, 2001.
25. Hall C. Water sorptivity of mortars and concretes: a review. Mag Concr Res 1989 ; 41 (14). 51-61. (Pubitemid 20595705)
26. Astm C. 1585, Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes. West Conshohocken, PA: ASTM, 2001.
27. Ransinchung GD, Kumar B. and Kumar V. Assessment of water absorption and chloride ion penetration of pavement quality concrete admixed with wollastonite and microsilica. Constr Build Mater 2009 ; 23 (2). 1168-1177.
28. Ganesan K., Rajagopal K. and Thangavel K. Rice husk ash blended cement: assessment of optimal level of replacement for strength and permeability properties of concrete. Constr Build Mater 2008 ; 22 (8). 1675-1683. (Pubitemid 351680670)
29. Powers TC Properties of fresh concrete. New York, NY: John Wiley and Sons, 1968.
30. Mostafa NY and Brown PW Heat of hydration of high reactive pozzolans in blended cements: isothermal conduction calorimetry. Thermochim Acta 2005 ; 435: 162-167. (Pubitemid 41214687)
31. AI-Khalaf MN and Yousift HA Use of rice husk ash in concrete. Int J Cem Compos Lightweight Concr 1984 ; 6 (4). 241-248.
32. Basu PC High performance concrete: mechanism and application. ICI J 2001 ; 2 (1). 15-38.
33. Martys NS and Ferraris CF Capillary transport in mortars and concrete. Cem Concr Res 1997 ; 27 (5). 747-760. (Pubitemid 127427199)
34. Tasdemir C. Combined effects of mineral admixtures and curing conditions on the sorptivity coefficients of concrete. Cem Concr Res 2003 ; 33: 1637-1642.
35. Wee TH, Suryavanshi JA and Tin SS Evaluation of rapid chloride permeability test (RCPT) results for concrete containing mineral admixtures. ACI Mater J 2000 ; 97 (2). 221-232.
36. Cook JD Rice husk ash. In: Swamy RN (ed.) Concrete technology and design, cement replacement materials. Vol. 3, London: Surrey University Press, 1986, pp. 171-195.
37. Philleo RE Freezing and thawing resistance of high-strength concrete. NCHRP Synthesis of Highway Practice 129 Transportation Research Board, 1986, p. 31.
38. Powers TC, Copeland LE and Mann HM Capillary continuity or discontinuity in cement paste. J PCA Res Develop Lab 1959 ; 1 (2). 38-48.
39. Lin YH, Tyan YY, Chang TP and Chang CY An assessment of optimal mixture for concrete made with recycled concrete aggregates. Cem Concr Res 2004 ; 34 (8). 1373-1380.
40. Tattersall GH and Baker PH An instigation of the effect of vibration on the workability of fresh concrete using a vertical pipe apparatus. Mag Concr Res 1989 ; 14 (146). 3-9.