Vector control PWM-VSI induction motor drive with a long motor feeder: Performance analysis of line filter networks

IET Electric Power Applications

Volumn 5, Issue 5, 2011, Pages 443-456

  Abdelsalam, A K ^a   Masoud, M I ^b   Finney, S J ^c   Williams, B W ^c  

^a Egypt Mansoura University   (Egypt)

^b Alexandria University The Faculty Of Engineering   (Egypt)

^c UNIVERSITY OF STRATHCLYDE   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

COMMON MODE VOLTAGE; CURRENT HARMONICS; DC-LINK; DETUNINGS; FILTER LOSS; FILTER NETWORKS; FILTER PERFORMANCE; INDUCTION MOTOR DRIVE; LINE FILTERS; LINE VOLTAGE; MOTOR TERMINALS; MOTOR VOLTAGE; OVER-VOLTAGES; PERFORMANCE ANALYSIS; PERFORMANCE STUDY; PWM VSI; RESISTOR CAPACITORS; TORQUE CURRENT; UNDERGROUND MINE; VECTOR CONTROLS; VOLTAGE REGULATIONS; VOLTAGE SOURCE INVERTER;

CAPACITORS; ELECTRIC DRIVES; INDUCTION MOTORS; RESISTORS; VARIABLE SPEED DRIVES; VOLTAGE REGULATORS;

FEEDING;

EID: 79957554653     PISSN: 17518660     EISSN: 17518679     Source Type: Journal    
DOI: 10.1049/iet-epa.2010.0040     Document Type: Article

References (30)

1. Wu, B.: 'High power converter systems', (IEEE Press and John Wiley 2006)
2. Novotny, D.W., and Lipo, T.A.: 'Vector control and dynamics of AC drives', (Oxford University Press 2000)
3. Krause, P.C.: 'Analysis of electric machinery and drive systems', (IEEE Press 2002)
4. Persson, E.: 'Transient effects in application of PWM inverters to induction motors', IEEE Trans. Ind. Appl., 1992, 28, (5), p. 1095-110110.1109/28.158834 0093-9994
5. Van Poucke, P., Belmans, R., and Geysen, W.: et al. 'Overvoltages in inverter fed induction machines using high frequency power electronic components', Ninth Annual Applied Power Electronics Conf. and Exposition, APEC'94, Orlando, FL, USA, February 1994, 1, p. 536-541
6. Raad, R.O., Henriksen, T., Raphael, H.B., and Hadler-Jacobsen, A.: 'Converter-fed subsea motor drives', IEEE Trans. Ind. Appl., 1996, 32, (5), p. 1069-107910.1109/28.536868 0093-9994
7. Von Jouanne, A., Haoran, Z., and Wallace, A.: 'An evaluation of mitigation techniques for bearing currents, EMI and overvoltages in ASD applications', IEEE Trans. Ind. Appl., 1998, 34, (5), p. 1113-112210.1109/28.720452 0093-9994
8. Matheson, E., von Jouanne, A., and Wallace, A.: 'Evaluation of inverter and cable losses in adjustable speed drive applications with long motor leads', Int. Conf. on Electric Machines and Drives, IEMD '99, Seattle, WA, USA, May 1999, p. 159-161
9. Naik, R., Nondahl, T.A., Melfi, M.J., Schiferl, R., and Jian-She, Wang: 'Circuit model for shaft voltage prediction in induction motors fed by PWM-based AC drives', IEEE Trans. Ind. Appl., 2003, 39, (5), p. 1294-129910.1109/TIA.2003.816504 0093-9994
10. Humiston, T., and Pillay, P.: 'Parameter measurements to study surge propagation in induction machines', IEEE Trans. Ind. Appl., 2004, 40, (5), p. 1341-134810.1109/TIA.2004.834077 0093-9994
11. Hanigovszki, N., Landkildehus, J., Spiazzi, G., and Blaabjerg, F.: 'An EMC evaluation of the use of unshielded motor cables in AC adjustable speed drive applications', IEEE Trans. Power Electron., 2006, 21, (1), p. 273-28110.1109/TPEL.2005.861182 0885-8993
12. Rodriguez, J., Pontt, J., and Silva, C.: et al. 'Resonances and overvoltages in a medium-voltage fan motor drive with long cables in an underground mine', IEEE Trans. Ind. Appl., 2006, 42, (3), p. 856-86310.1109/TIA.2006.872936 0093-9994
13. Pomilio, J.A., de Souza, C.R., Matias, L., Peres, P.L.D., and Bonatti, I.S.: 'Driving AC motors through a long cable: the inverter switching strategy', IEEE Trans. Energy Convers., 1999, 14, (4), p. 1441-144710.1109/60.815087 0885-8969
14. Aoki, N., Satoh, K., and Nabae, A.: 'Damping circuit to suppress motor terminal overvoltage and ringing in PWM inverter-fed AC motor drive systems with long motor leads', IEEE Trans. Ind. Appl., 1999, 35, (5), p. 1014-102010.1109/28.793361 0093-9994
15. De Lima, A., Dommel, H., and Stephan, R.: 'Modeling adjustable-speed drives with long feeders', IEEE Trans. Ind. Electron., 2000, 47, (3), p. 549-55610.1109/41.847895 0278-0046
16. Vendrusculo, E., and Pomilio, J.: 'Avoiding over-voltages in long distance driving of induction motors', Sixteenth Annual Applied Power Electronics Conf. and Exposition, APEC'2001, Anaheim, CA, USA, March 2001, p. 622-627
17. Capitaneanu, S.L., de Fornel, B., Fadel, M., Jadot, F., and Malrait, F.: 'Modelling and identification for reduction of overvoltage transients', IEE Proc. Electr. Power Appl., 2003, 150, (2), p. 175-18410.1049/ip-epa:20030248 1350-2352
18. Moreira, A.F., Lipo, T.A., Venkataramanan, G., and Bernet, S.: 'High-frequency modeling for cable and induction motor overvoltage studies in long cable drives', IEEE Trans. Ind. Appl., 2002, 38, (5), p. 1297-130610.1109/TIA.2002.802920 0093-9994
19. Jianguo, L., Pillay, P., and Douglas, H.: 'Wavelet modeling of motor drives applied to the calculation of motor terminal overvoltages', IEEE Trans. Ind. Electron., 2004, 51, (1), p. 61-6610.1109/TIE.2003.822085 0278-0046
20. Esmaeli, A., Baojun, J., and Li, S.: 'Modeling and suppression of PWM inverter's adverse effects', First Int. Symp. on Systems and Control in Aerospace and Astronautics, ISSCAA'2006, January 2006, p. 1450-1454
21. Yongzhan, Z., Xuezhong, L., Chao, G., and Xianbo, D.: 'Influence of cable insulation structure on terminal over-voltage of inverter-fed motor', IEEE Int. Conf. on Solid Dielectrics, ICSD'07, July 2007, p. 75-78
22. Amarir, S., and Al-Haddad, K.: 'A modeling technique to analyze the impact of inverter supply voltage and cable length on industrial motor-drives', IEEE Trans. Power Electron., 2008, 23, (2), p. 753-76210.1109/TPEL.2007.915773 0885-8993
23. Von Jouanne, A., Rendusara, D.A., Enjeti, P.N., and Gray, J.W.: 'Filtering techniques to minimize the effect of long motor leads on PWM inverter-fed AC motor drive systems', IEEE Trans. Ind. Appl., 1996, 32, (4), p. 919-92610.1109/28.511650 0093-9994
24. Von Jouanne, A., and Enjeti, P.: 'Design considerations for an inverter output filter to mitigate the effects of long motor leads in ASD applications', IEEE Trans. Ind. Appl., 1997, 33, (5), p. 1138-114510.1109/28.633789 0093-9994
25. Rendusara, D., and Enjeti, P.: 'A method to reduce common mode and differential mode dv/dt at the motor terminals in PWM rectifier/PWM Inverter type adjustable speed drive systems', Thirteenth Ann. Applied Power Electronics Conf. and Exposition, APEC'1998, Anaheim, CA, USA, February 1998, p. 1010-1016
26. Rendusara, D., and Enjeti, P.: 'An improved inverter output filter configuration reduces common and differential modes dv/dt at the motor terminals in PWM drive systems', IEEE Trans. Power Electron., 1998, 13, (6), p. 1135-114310.1109/63.728340 0885-8993
27. Habetler, T., Naik, R., and Nondahl, T.: 'Design and implementation of an inverter output LC filter used for dv/dt reduction', IEEE Trans. Power Electron., 2002, 17, (3), p. 327-33110.1109/TPEL.2002.1004240 0885-8993
28. Chen, X., Xu, D., Liu, F., and Zhang, J.: 'A novel inverter-output passive filter for reducing both differential- and common-mode dv/dt at the motor terminals in PWM drive systems', IEEE Trans. Ind. Electron., 2007, 54, (1), p. 419-42610.1109/TIE.2006.885517 0278-0046
29. Moreira, A.F., Santos, P.M., Lipo, T.A., and Venkataramanan, G.: 'Filter networks for long cable drives and their influence on motor voltage distribution and common-mode currents', IEEE Trans. Ind. Electron., 2005, 52, (2), p. 515-52210.1109/TIE.2005.844237 0278-0046
30. Gubia, E., Sanchis, P., Ursua, A., and Marroyo, L.: 'High frequency filter techniques for inverter-fed motors', IEEE 35th Ann. Power Electronics Specialists Conf., PESC'2004, June 2004, 2, p. 1291-1297