Optimization of an inclined elliptic impinging jet with cross flow for enhancing heat transfer

Heat and Mass Transfer/Waerme- und Stoffuebertragung

Volumn 47, Issue 6, 2011, Pages 731-742

  Heo, Man Woong ^a   Lee, Ki Don ^a   Kim, Kwang Yong ^a  

^a Inha University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

CROSS FLOWS; DESIGN VARIABLES; ENHANCING HEAT TRANSFER; FLUID FLOW; HEAT TRANSFER PERFORMANCE; IMPINGING JET; JET NOZZLE; OBJECTIVE FUNCTIONS; PARAMETRIC STUDY; RADIAL BASIS NEURAL NETWORKS; REYNOLDS AVERAGED NAVIER-STOKES EQUATION; TARGET PLATES; UNIFORM HEAT FLUX;

ASPECT RATIO; DESIGN; GEOMETRY; HEAT FLUX; NAVIER STOKES EQUATIONS; NEURAL NETWORKS; NOZZLE DESIGN; NOZZLES; NUSSELT NUMBER;

OPTIMIZATION;

EID: 79956093162     PISSN: 09477411     EISSN: 14321181     Source Type: Journal    
DOI: 10.1007/s00231-011-0763-2     Document Type: Article

References (32)

1. JP Bouchez RJ Goldstein 1975 Impingement cooling from a circular jet in a cross flow Int J Heat Mass Transfer 18 719 730 10.1016/0017-9310(75)90201-X
2. RJ Goldstein AI Behbahani KK Heppelmann 1986 Streamwise distribution of the recovery factor and the local heat transfer coefficient to an impinging circular air jet Int J Heat Mass Transfer 29 8 1227 1235 10.1016/0017-9310(86) 90155-9 (Pubitemid 16634173)
3. B Sagot G Antonini A Christgen F Buron 2008 Jet impingement heat transfer on a flat plate at a constant wall temperature Int J Therm Sci 47 1610 1619 10.1016/j.ijthermalsci.2007.10.020
4. Paz MLD, Jubran BA (2008) Predictions of thermal and hydrodynamic characteristics of a single circular micro-jet impinging on a flat plate. In: ASME Turbo Expo 2008, Berlin, Germany, GT2008-50490
5. Zecchi S, Bacci A (2004) Numerical analysis of crossflow and single jet impinging on a heated surface with shaped groove. In: ASME Turbo Expo 2004, Vienna, Austria, GT2004-53549
6. Zu YQ, Yan YY, Malrson JD (2009) CFD prediction for multi-jet impingement heat transfer. In: ASME Turbo Expo 2009, Orlando, Florida, GT2009-59488
7. JH Lee SJ Lee 1999 Stagnation region heat transfer of a turbulent axisymmetric jet impingement Exp Heat Transfer 12 137 156 10.1080/ 089161599269753
8. Chambers AC, Gillespie DRH, Ireland PT, Mitchell M (2006) Enhancement of impingement cooling in a high cross flow channel using shaped impingement cooling holes. In: ASME Turbo Expo 2006, Barcelona, GT2006-91229
9. YT Yang SY Tsai 2007 Numerical study of transient conjugate heat transfer of a turbulent impinging jet Int J Heat Transfer 50 799 807 1124.80383 10.1016/j.ijheatmasstransfer.2006.08.022 (Pubitemid 46186346)
10. HG Lee HS Yoon MY Ha 2008 A numerical investigation on the fluid flow and heat transfer in the confined impinging slot jet in the low reynolds number region for different channel heights Int J Heat Mass Transfer 51 4055 4068 1148.80325 10.1016/j.ijheatmasstransfer.2008.01.015
11. Ashok Kumar M, Prasad BVSSS (2009) Computational investigations of flow and heat transfer on an effused concave surface with a single row of impinging jets for different exit configurations. In: ASME Turbo Expo 2009, Orlando, Florida, USA, GT2009-59282
12. Arvind Rao G, Kitron Belinkov M, Levy Y (2009) Numerical analysis of a multiple jet impingement system. In: ASME Turbo Expo, Orlando, Florida, USA, GT2009-59719
13. JH Lee SJ Lee 2000 The effect of nozzle aspect ratio on stagnation region heat transfer characteristics of elliptic impinging jet Int J Heat Mass Transfer 43 555 575 0949.76501 10.1016/S0017-9310(99)00167-2
14. JH Lee SJ Lee 2000 The effect of nozzle configuration on stagnation region heat transfer enhancement of axisymmetic jet impingement Int J Heat Mass Transfer 43 3497 3509 10.1016/S0017-9310(99)00349-X
15. Oladiran MT (1981) The effect of nozzle inclination on heat transfer in jet impingement systems. PhD Thesis, Cranfield Institute of Technology
16. Funazaki K, Tarukawa Y, Kudo T (2001) Heat transfer characteristics of and integrated cooling configuration for ultra-high temperature turbine blades. In: ASME Turbo Expo, New Orleans, Louisiana, 2001-GT-0148
17. Funazaki K, Hachiya K (2003) Systematic numerical studies on heat transfer and aerodynamic characteristics of impingement cooling devices combined with pins. In: ASME Turbo Expo 2003, Atlanta, Georgia, USA, GT2003-38256
18. Funazaki K, BinSalleh H (2008) Extensive studies on internal and external heat transfer characteristics of integrated impingement cooling structures for HP Turbines. In: ASME Turbo Expo, Berlin, Germany, GT2008-50202
19. K Kanokjaruvijit RF Martinez-Botas 2005 Parametric effects on heat transfer of impingement on dimpled surface J Turbomachinery 127 287 296 10.1115/1.1791292 (Pubitemid 40919392)
20. SV Ekkad D Kontrovitz 2002 Jet impingement heat transfer on dimpled target surfaces Int J Heat Fluid Flow 23 22 28 10.1016/S0142-727X(01)00139-4 (Pubitemid 34170197)
21. Rhee DH, Nam YW, Cho HH (2004) Local heat/mass transfer with various rib arrangements in impingement/effusion cooling system with crossflow. In: ASME Turbo Expo 2004, Vienna, Austria, GT2004-53686
22. A Samad KY Kim 2009 Surrogate based optimization techniques for aerodynamic design of turbomachinery Int J Fluid Machinery Systems 2 2 179 188 10.5293/IJFMS.2009.2.2.179
23. Orr MJL (1996) Introduction to radial basis neural network. Center for cognitive science. Edinburgh University, Scotland, UK
24. Lee KD, Kim KY (2009) Optimization of a fan-shaped hole for film cooling using a surrogate model. In: Proceedings of ASME Turbo Expo, Orlando, Florida, USA, GT2009-59520
25. JH Kim JH Choi KY Kim 2010 Surrogate modeling for optimization of a centrifugal compressor impeller Int J Fluid Machinery Systems 3 1 29 38 10.5293/IJFMS.2010.3.1.029
26. Ansys CFX 11.0 (2006) Ansys Inc
27. Menter F, Esch T (2001) Elements of industrial heat transfer prediction. 16th Bazilian congress of mechanical engineering (COBEM), Uberlandia Brazil
28. Wilcox DD (1986) Multiscale model for turbulent flows. In: AIAA 24th aerospace science meeting, American Institute of Aeronautics and Astronautics
29. JE Bardina PG Huang TJ Coakley 1997 Turbulence modeling validation AIAA J 35 1997 2121
30. R Thakur W Gropp B Toonen 2005 Optimizing the synchronization operations in message passing interface one-sided communication Int J High Perf Comp Appl 19 11 128
31. ®, The language of technical computing, Release 14, The MathWorks Inc, 2004
32. FR Menter M Kuntz R Langtry 2003 Ten year of industrial experience with the SST turbulence model Turbulence Heat Mass Transfer 4 625 632